Home
Inverted microscopes
Axio Observer
Axio Observer 7 materials

Axio Observer 7 materials

Axio Observer 7 materials

+2

Variants Axio Observer 7 materials You can customize this list by removing one or more columns. Show all variants (2) Show all Hide all	Inverted microscope Axio Observer 7 materials Item no.: 491914-0010-000	Microscope Axio Observer 7 materials complete for system NMI Item no.: 491917-0014-000

Variants Axio Observer 7 materials You can customize this list by removing one or more columns. Show all variants (2) Show all Hide all	example picture Inverted microscope Axio Observer 7 materials Item no.: 491914-0010-000 Inverted microscope Axio Observer 7 materials Item no.: 491914-0010-000 Inverted microscope Axio Observer 7 materials for reflected-light brightfield, darkfield, circular differential interference contrast and polarization; with reflected-light illuminator HD Pol FL mot., 6-position reflector turret mot., objectives EC Epiplan-Neofluar HD DIC and illuminator microLED Inverted microscope Axio Observer 7 materials for reflected-...	example picture Microscope Axio Observer 7 materials complete for system NMI Item no.: 491917-0014-000 Microscope Axio Observer 7 materials complete for system NMI Item no.: 491917-0014-000 Microscope Axio Observer 7 materials NMI for Non-Metallic-Inclusion (NMI) Analysis of multiple specimens. Non-metallic inclusion analysis (NMI) is a standard based application with technical minimum requirements regarding the microscope, digital camera and PC hardware. Modifications are only possible after consultation with the support. Axio Observer 7 materials is suitable for the simultaneous evaluation of several single specimens. Including bright field, objectives EC Epiplan-Neofluar 5x/10x,/20x, camera, joystick, stand, scanning stage, dust cover, workstation, monitor, ZEN core and modules for NMI. Microscope Axio Observer 7 materials NMI for Non-Metallic-In...
Microscope stands upright	Microscope stands upright Z-drive operation, flat; right Z-drive operation, flat; right Item no.: 430051-0000-000 Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right Item no.: 430051-0000-000	Microscope stands upright Z-drive operation, flat; right Z-drive operation, flat; right Item no.: 430051-0000-000 Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right Item no.: 430051-0000-000
Microscope stands inverted	Microscope stands inverted Microscope stand Axio Observer 7 materials Microscope stand Axio Observer 7 materials Item no.: 431009-9904-000 Microscope stand Axio Observer 7 materials - 6-position objective nosepiece, HD DIC M27 mot. ACR - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - keys for switching TL/RL illumination - circular operation key unit right and left - light- and contrast manager - slider mount 6x30 for Polarizer slider, 90° rotatable - slider mount 6x20 for sliders C-DIC and TIC - interfaces 4x CAN, 2x USB-A, 1x USB-C and TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable Item no.: 431009-9904-000 3-position Optovar turret mot. 3-position Optovar turret mot. Item no.: 431013-0000-000 3-position Optovar turret mot. Item no.: 431013-0000-000 Sideport 60N L, 3 switching positions Sideport 60N L, 3 switching positions Item no.: 425152-0000-000 Sideport 60N L, 3 switching positions (100% vis : 0% L / 0% vis : 100% L / 50% vis : 50% L) Item no.: 425152-0000-000 Path deflection to the tube Path deflection to the tube Item no.: 000000-1069-227 Path deflection to the tube for visual observation Item no.: 000000-1069-227	Microscope stands inverted Microscope stand Axio Observer 7 materials Microscope stand Axio Observer 7 materials Item no.: 431009-9904-000 Microscope stand Axio Observer 7 materials - 6-position objective nosepiece, HD DIC M27 mot. ACR - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - keys for switching TL/RL illumination - circular operation key unit right and left - light- and contrast manager - slider mount 6x30 for Polarizer slider, 90° rotatable - slider mount 6x20 for sliders C-DIC and TIC - interfaces 4x CAN, 2x USB-A, 1x USB-C and TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable Item no.: 431009-9904-000 3-position Optovar turret mot. 3-position Optovar turret mot. Item no.: 431013-0000-000 3-position Optovar turret mot. Item no.: 431013-0000-000 Sideport 60N L, 3 switching positions Sideport 60N L, 3 switching positions Item no.: 425152-0000-000 Sideport 60N L, 3 switching positions (100% vis : 0% L / 0% vis : 100% L / 50% vis : 50% L) Item no.: 425152-0000-000 Path deflection to the tube Path deflection to the tube Item no.: 000000-1069-227 Path deflection to the tube for visual observation Item no.: 000000-1069-227
Stand accessories	Stand accessories 3-position filter slider, d=25 mm 3-position filter slider, d=25 mm Item no.: 000000-1062-259 3-position filter slider, d=25 mm for FL incident-light equipment for Axiovert 200 Item no.: 000000-1062-259 6-position reflector turret mot. for P&C modules 6-position reflector turret mot. for P&C modules Item no.: 424947-0000-000 6-position reflector turret mot. for P&C modules reflector modules exchangable without removal of reflector turret Item no.: 424947-0000-000	Stand accessories 3-position filter slider, d=25 mm 3-position filter slider, d=25 mm Item no.: 000000-1062-259 3-position filter slider, d=25 mm for FL incident-light equipment for Axiovert 200 Item no.: 000000-1062-259 6-position reflector turret mot. ACR for P&C modules 6-position reflector turret mot. ACR for P&C modules Item no.: 424948-0000-000 6-position reflector turret mot. ACR for P&C modules reflector modules exchangable without removal of reflector turret Item no.: 424948-0000-000
Reflected-light illumination	Reflected-light illumination Reflected-light illuminator HD Pol FL mot. Reflected-light illuminator HD Pol FL mot. Item no.: 423608-9011-000 Reflected-light illuminator HD Pol FL mot. - slider mounts for manual or motorized stop sliders - slider mount 6x30 for polarizer slider, 90° rotatable - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80% Item no.: 423608-9011-000 Iris stop slider mot. for incident-light equipment Iris stop slider mot. for incident-light equipment Item no.: 423646-0000-000 Iris stop slider mot. for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path) Item no.: 423646-0000-000 Aperture diaphragm slider MAT mot. Aperture diaphragm slider MAT mot. Item no.: 423644-0000-000 Aperture diaphragm slider MAT mot. with integrated ground glass plate Item no.: 423644-0000-000 Reflector module C-DIC/TIC ACR P&C for reflected light Reflector module C-DIC/TIC ACR P&C for reflected light Item no.: 424941-9000-000 Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization Item no.: 424941-9000-000 Reflector module DIC/Pol ACR P&C shift free for reflected light Reflector module DIC/Pol ACR P&C shift free for reflected light Item no.: 424939-9000-000 Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other Item no.: 424939-9000-000 Reflector module dark field ACR P&C for reflected light Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000	Reflected-light illumination Reflected-light illuminator HD Pol FL mot. Reflected-light illuminator HD Pol FL mot. Item no.: 423608-9011-000 Reflected-light illuminator HD Pol FL mot. - slider mounts for manual or motorized stop sliders - slider mount 6x30 for polarizer slider, 90° rotatable - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80% Item no.: 423608-9011-000 Iris stop slider mot. for incident-light equipment Iris stop slider mot. for incident-light equipment Item no.: 423646-0000-000 Iris stop slider mot. for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path) Item no.: 423646-0000-000 Aperture diaphragm slider MAT mot. Aperture diaphragm slider MAT mot. Item no.: 423644-0000-000 Aperture diaphragm slider MAT mot. with integrated ground glass plate Item no.: 423644-0000-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000
Lamps and Lamp housings	Lamps and Lamp housings Illuminator microLED 3 Illuminator microLED 3 Item no.: 423053-9074-000 Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90 Item no.: 423053-9074-000	Lamps and Lamp housings Illuminator microLED 3 Illuminator microLED 3 Item no.: 423053-9074-000 Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90 Item no.: 423053-9074-000
Polarization	Polarization C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x Item no.: 000000-1105-193 C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism Item no.: 000000-1105-193 C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x Item no.: 000000-1105-192 C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism Item no.: 000000-1105-192	Polarization
Stages and accessories	Stages and accessories Mechanical stage 130x85 R/L Mechanical stage 130x85 R/L Item no.: 432016-9902-000 Mechanical stage 130x85 R/L for mounting frames K 160 x 110 mm and Z-PIEZO, compatible with objectives autocorr Item no.: 432016-9902-000 Mounting frame K for reflected light, d=72mm Mounting frame K for reflected light, d=72mm Item no.: 451344-0000-000 Mounting frame K for reflected light, d=72mm frame size 160 x 110 mm Item no.: 451344-0000-000 Stage insert, metal; D=72 mm, d=23 mm Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000	Stages and accessories Universal mounting frame K Universal mounting frame K Item no.: 451352-0000-000 Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm Item no.: 451352-0000-000 Mounting frame for steel specimen (D) Mounting frame for steel specimen (D) Item no.: 432322-9000-000 Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm Item no.: 432322-9000-000 Electronic Coaxial Drive; CAN (D) Electronic Coaxial Drive; CAN (D) Item no.: 432904-9901-000 Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009 Item no.: 432904-9901-000 Scanning Stage 130x85 MAT; CAN (D) Scanning Stage 130x85 MAT; CAN (D) Item no.: 432034-9001-000 Scanning Stage 130x85 MAT; CAN (D) for Axio Observer 3 / 5 / 7 materials - stepper motor drive with 2 mm spindle pitch and integrated controller - direct connection via CAN bus - flat surface for huge specimen - travel range: 130 mm x 85 mm (86 mm x 50 mm with HD-objectives) - adjustable limit switches - max speed: 20 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - tiltable holder for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z Piezo - compatible with Axio Observer A1m/D1m/Z1m and Axiovert 100/135/200 Item no.: 432034-9001-000
Tubes and accessories	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425537-0000-000 Binocular tube 45°/23 with manual shutter Item no.: 425537-0000-000	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425537-0000-000 Binocular tube 45°/23 with manual shutter Item no.: 425537-0000-000
Filters	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000
Eyepieces	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000
Eyepiece accessories	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000
Reflected-light objectives	Reflected-light objectives Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm) Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm) Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm) Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm) Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Item no.: 000000-1156-514 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm) Item no.: 000000-1156-514	Reflected-light objectives Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm) Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm) Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Item no.: 000000-1156-514 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm) Item no.: 000000-1156-514
Packing and dust protection	Packing and dust protection Dust cover L600xW420xH620 mm Dust cover L600xW420xH620 mm Item no.: 459330-0000-000 Dust cover L600xW420xH620 mm for Axio Observer / Axiovert 200/200M Item no.: 459330-0000-000	Packing and dust protection Dust cover L600xW420xH620 mm Dust cover L600xW420xH620 mm Item no.: 459330-0000-000 Dust cover L600xW420xH620 mm for Axio Observer / Axiovert 200/200M Item no.: 459330-0000-000
Video devices	Video devices	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000
Measuring and counting components	Measuring and counting components	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000
Image processing	Image processing	Image processing Microscopy Workstation Premium (HP Z8 G5) (O) Microscopy Workstation Premium (HP Z8 G5) (O) Item no.: 410203-9914-000 Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit Item no.: 410203-9914-000 Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Item no.: 410330-1100-000 Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Default processor configuration - Intel Xeon W5-3425 (3.2 GHz, 30 MB cache, 12 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 410330-1100-000 Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) Item no.: 410303-3206-000 Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 410303-3206-000 Graphics Card NVIDIA RTX A2000 12 GB (O) Graphics Card NVIDIA RTX A2000 12 GB (O) Item no.: 410331-3000-000 Graphics Card NVIDIA RTX A2000 12 GB (O) Professional graphics card for Microscopy Workstation - 12 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel) Item no.: 410331-3000-000 System Configuration 2 for HP Z8 G5 (O) System Configuration 2 for HP Z8 G5 (O) Item no.: 000000-2615-590 System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 000000-2615-590 Language Pack English US (O) Language Pack English US (O) Item no.: 410380-0200-000 Language Pack English US (O) - Keyboard with English (US) layout Item no.: 410380-0200-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Item no.: 410350-2408-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable Item no.: 410350-2408-000 Microscopy Camera Axiocam 705 color R2 (D) Microscopy Camera Axiocam 705 color R2 (D) Item no.: 426560-9051-000 Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9051-000
Software for image processing	Software for image processing	Software for image processing ZEN core 3.9 ZEN core 3.9 Item no.: 410135-0011-390 ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit) Item no.: 410135-0011-390 ZEN Module Non-Metallic Inclusion Analysis ZEN Module Non-Metallic Inclusion Analysis Item no.: 410136-0106-360 ZEN Module Non-Metallic Inclusion Analysis Software Module for evaluation and rating of non-metallic inclusions in steel (Oxides, Sulfides and Nitrides). The following standards are supported: ASTM E45a, ISO 4967, JIS G0555, GB/T 10561, EN 10247, SEP 1571 and DIN 50602. The scope of delivery includes preconfigured and automated workflows for steel cleanliness analysis and -rating. The provided job templates are available for the user roles Supervisor and Operator and cover image acquisition, result presentation in interactive views for fast inspection and revision of inclusions, single reports with results of characteristic values and standard specific methods per mounted specimen. Furthermore, an overview report with the summary of the characteristic values, statistics and method results per standard for a set of evaluated specimens. Automated storage of generated results and inspection views in the data archive. Archived data can be re-opened and viewed. Optimized workflows for mounted specimen with/without nitride inclusions. The workflows can be conducted with acquired or loaded images. - Adjustable image acquisition settings for microscope and camera for the supervisor. Selectable image acquisition settings for the operator - Standard-measuring-field-based definition of the tiles acquisition area - Standard Template Editor to customize existing standards by copy and edit. Adjustable parameter: minimum particle and inclusion size; particle distance (in direction/perpendicular to main deformation orientation; size ratio for differentiation of globular and elongated inclusions. - Automated parallel analysis of all selected standards - Efficient auto segmentation for oxide, sulfide and nitride detection - Region adaption algorithm for optimized detection of mixed type Oxide/sulfide inclusions (complex, heterogenous inclusions) - Artifact filter for automated filtering of scratches - Advanced artifact filter for automated filtering of sulfide halos - Automated detection of the main deformation orientation (horizontal, vertical) - Standard specific severity rating filter: automated exclusion of inclusions per defined size class - Global result view with inclusion gallery for inspection and revision of objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options and result statistics. Standard results selectable by one mouse click. - Field based result view with acquired specimen image, a grid of standard-measuring-fields, specimen navigation for live inspection and revision of detected objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options per standard specific inclusion types and result statistics with field rating. Interactive selection of multiple objects for artifact classification. - Field based result view with True Worst Field detection: identification of inclusion type specific worst fields that are completely independent of the grid fields. - Standard results selectable by one mouse click. - Joint result table with characteristic core values of all selected standards. - Reports in Microsoft Word (from Microsoft Word 2013) and export as PDF. Automated generation of reports and summary reports for all standards. - Excel export of result tables - Customer database in Excel table format for input forms. Item no.: 410136-0106-360 ZEN Toolkit Motorized Acquisition ZEN Toolkit Motorized Acquisition Item no.: 410136-0165-390 ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image Item no.: 410136-0165-390