Inverted microscope Axio Observer 7 for transmitted-light brightfield LED, phase contrast, differential interference contrast and fluorescence with HXP 120 V as well as Scanning Stage CAN and Docking station
Inverted microscope Axio Observer 7 for transmitted-light br...
example picture
Inverted microscope Axio Observer 7 ACR
Item no.:
491917-0002-000
Inverted microscope Axio Observer 7 ACR
Item no.:
491917-0002-000
Inverted microscope Axio Observer 7 ACR for transmitted-light brightfield LED, phase contrast, differential interference contrast, fluorescence with Colibri 7; equipped with ACR function, Scanning Stage STEP and Docking station
Inverted microscope Axio Observer 7 ACR for transmitted-ligh...
Axio Observer scan Standard
Item no.:
000000-2624-364
Axio Observer scan Standard
Item no.:
000000-2624-364
Promotion WF Axio Observer for Screening - Standard AI Sample Finder, Colibri 7 (5 LEDs) , SBP (6xTurret), stage insert for Slides and MWP Axiocam 807m, BioApps, EC PN 5x/0.16, PApo 20x/0.8
Promotion WF Axio Observer for Screening - Standard AI Sampl...
Axio Observer section Standard
Item no.:
000000-2624-362
Axio Observer section Standard
Item no.:
000000-2624-362
Promotion WF Axio Observer for Sectioning - Standard AI Sample Finder, Deconvolution, Colibri 7 (5 LEDs) , SBP (6x), Axiocam 807m, DCV, BioApps EC PN 5x/0.16, PApo 20x/0.8, PApo 63x/1.4
Promotion WF Axio Observer for Sectioning - Standard AI Samp...
Axio Observer live Standard
Item no.:
000000-2624-360
Axio Observer live Standard
Item no.:
000000-2624-360
Promotion WF Axio Observer for Live Cell Imaging - Standard AI Sample Finder, Colibri 7 (5 LEDs) , SBP (FFW), IBIDI Stage Incubation Axiocam 807m, 2D Tools EC PN 5x/0.16, PApo 20x/0.8, PApo 40x/0.95
Promotion WF Axio Observer for Live Cell Imaging - Standard ...
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
3-position Optovar turret mot.
3-position Optovar turret mot.
Item no.:
431013-0000-000
3-position Optovar turret mot.
Item no.:
431013-0000-000
Sideport 60N L, 3 switching positions
Sideport 60N L, 3 switching positions
Item no.:
425152-0000-000
Sideport 60N L, 3 switching positions (100% vis : 0% L / 0% vis : 100% L / 50% vis : 50% L)
Item no.:
425152-0000-000
Path deflection to the tube
Path deflection to the tube
Item no.:
000000-1069-227
Path deflection to the tube for visual observation
Item no.:
000000-1069-227
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
3-position Optovar turret mot.
3-position Optovar turret mot.
Item no.:
431013-0000-000
3-position Optovar turret mot.
Item no.:
431013-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Path deflection to the tube
Path deflection to the tube
Item no.:
000000-1069-227
Path deflection to the tube for visual observation
Item no.:
000000-1069-227
Aqua Stop II
Aqua Stop II
Item no.:
431716-0000-000
Aqua Stop II for Axio Observer, Axiovert 5 and Axiovert 200
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
1-position tube lens mount, fixed
1-position tube lens mount, fixed
Item no.:
431010-0000-000
1-position tube lens mount, fixed
Item no.:
431010-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Item no.:
000000-1069-229
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
1-position tube lens mount, fixed
1-position tube lens mount, fixed
Item no.:
431010-0000-000
1-position tube lens mount, fixed
Item no.:
431010-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
Item no.:
431007-9000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Item no.:
000000-1069-229
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
1-position tube lens mount, fixed
1-position tube lens mount, fixed
Item no.:
431010-0000-000
1-position tube lens mount, fixed
Item no.:
431010-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Item no.:
000000-1069-229
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
1-position tube lens mount, fixed
1-position tube lens mount, fixed
Item no.:
431010-0000-000
1-position tube lens mount, fixed
Item no.:
431010-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Item no.:
000000-1069-229
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable
Item no.:
431007-9904-000
1-position tube lens mount, fixed
1-position tube lens mount, fixed
Item no.:
431010-0000-000
1-position tube lens mount, fixed
Item no.:
431010-0000-000
Sideport 60N L/R 100, 3 switching positions
Sideport 60N L/R 100, 3 switching positions
Item no.:
425155-0000-000
Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)
Item no.:
425155-0000-000
Beam path switching mot
Beam path switching mot
Item no.:
000000-1069-229
Beam path switching mot between visual observation or frontport or baseport
Item no.:
000000-1069-229
Anti vibration set Axio Observer (D)
Anti vibration set Axio Observer (D)
Item no.:
431007-9000-000
Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand
FL attenuator, discrete Insert for the aperture stop plane of reflected-light illuminators. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.
Item no.:
423647-0000-000
6-position reflector turret mot. for P&C modules
6-position reflector turret mot. for P&C modules
Item no.:
424947-0000-000
6-position reflector turret mot. for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424947-0000-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
6-position objective nosepiece, H DIC M27 mot. ACR
6-position objective nosepiece, H DIC M27 mot. ACR
Item no.:
424528-0000-000
6-position objective nosepiece, H DIC M27 mot. ACR
Item no.:
424528-0000-000
6-position reflector turret mot. ACR for P&C modules
6-position reflector turret mot. ACR for P&C modules
Item no.:
424948-0000-000
6-position reflector turret mot. ACR for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424948-0000-000
Protection filter for reflector turret
Protection filter for reflector turret
Item no.:
000000-1068-113
Protection filter for reflector turret
Item no.:
000000-1068-113
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
6-position reflector turret mot. for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424947-0000-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
6-position reflector turret mot. for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424947-0000-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
Item no.:
432907-9901-000
Dual filter wheel mot. for beam splitting and emission; CAN
Dual filter wheel mot. for beam splitting and emission; CAN
Item no.:
452358-9011-000
Dual filter wheel mot. for beam splitting and emission; CAN with mount for 6x beam splitter and 8x emission filter for use instead of the reflector turret on Axio Observer.Z1 and Axio Observer 7. - usage connected with with CAN distributor (available separately) - incl. Power supply 100-240V / 50-60 Hz / max. 1.4 A; 24V DC / max. 2.5 A with country specific plug Beam splitter filter wheel: - mount for up to 6 beam splitters 36 x 26 mm - switching time of <(><<)> 300 ms for adjacent filters Emission filter wheel: - mount for up to 8 filters with d=25 mm - filter thickness max. 4 mm - switching time of <(><<)> 60 ms for adjacent filters
6-position reflector turret mot. for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424947-0000-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
Definite Focus 3 incl. 6-position nosepiece H DIC M27 mot. ACR for Axio Observer 7 Consisting of: - sensor module Definite Focus 3 - Focus Controller 3 - slider mount for beam combiner module - attenuation filter BG 39, tilted, for LD condenser 0.55 - connecting cable and CAN cable
Item no.:
424533-9111-000
Beam Combiner Module UV/VIS for Definite Focus
Beam Combiner Module UV/VIS for Definite Focus
Item no.:
424533-9022-000
Beam Combiner Module UV/VIS for Definite Focus or all applications that require a transmission range between 320nm and 800nm.
Item no.:
424533-9022-000
6-position reflector turret mot. for P&C modules
6-position reflector turret mot. for P&C modules
Item no.:
424947-0000-000
6-position reflector turret mot. for P<(>&<)>C modules reflector modules exchangable without removal of reflector turret
Item no.:
424947-0000-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
Definite Focus 3 incl. 6-position nosepiece H DIC M27 mot. ACR for Axio Observer 7 Consisting of: - sensor module Definite Focus 3 - Focus Controller 3 - slider mount for beam combiner module - attenuation filter BG 39, tilted, for LD condenser 0.55 - connecting cable and CAN cable
Item no.:
424533-9111-000
Beam Combiner Module UV/VIS for Definite Focus
Beam Combiner Module UV/VIS for Definite Focus
Item no.:
424533-9022-000
Beam Combiner Module UV/VIS for Definite Focus or all applications that require a transmission range between 320nm and 800nm.
Item no.:
424533-9022-000
Docking station for TFT-Display
Docking station for TFT-Display
Item no.:
432907-9901-000
Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable
Item no.:
432907-9901-000
Dual filter wheel mot. for beam splitting and emission; CAN
Dual filter wheel mot. for beam splitting and emission; CAN
Item no.:
452358-9011-000
Dual filter wheel mot. for beam splitting and emission; CAN with mount for 6x beam splitter and 8x emission filter for use instead of the reflector turret on Axio Observer.Z1 and Axio Observer 7. - usage connected with with CAN distributor (available separately) - incl. Power supply 100-240V / 50-60 Hz / max. 1.4 A; 24V DC / max. 2.5 A with country specific plug Beam splitter filter wheel: - mount for up to 6 beam splitters 36 x 26 mm - switching time of <(><<)> 300 ms for adjacent filters Emission filter wheel: - mount for up to 8 filters with d=25 mm - filter thickness max. 4 mm - switching time of <(><<)> 60 ms for adjacent filters
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Carrier transmitted-light illumination with Shutter
Carrier transmitted-light illumination with Shutter
Item no.:
423926-9000-000
Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable
Item no.:
423926-9000-000
Attachment lamp VIS-LED with collector
Attachment lamp VIS-LED with collector
Item no.:
423053-9030-000
Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras
Shutter FL, internal for stands Axio Observer 3 / 5 / 7 / D1 / Z1 for reflected-light illumination switching time <(><<)> 60 ms switching frequency max. 5 Hz
Item no.:
423625-0000-000
Antiglare screen for Axio Observer/Axiovert 200
Antiglare screen for Axio Observer/Axiovert 200
Item no.:
000000-1109-741
Antiglare screen for Axio Observer/Axiovert
Item no.:
000000-1109-741
Iris stop slider for incident-light equipment
Iris stop slider for incident-light equipment
Item no.:
000000-1062-360
Iris stop slider for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path)
Item no.:
000000-1062-360
Reflector module FL EC P&C
Reflector module FL EC P&C
Item no.:
424931-0000-000
Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Item no.:
423607-9901-000
Antiglare screen for Axio Observer/Axiovert 200
Antiglare screen for Axio Observer/Axiovert 200
Item no.:
000000-1109-741
Antiglare screen for Axio Observer/Axiovert
Item no.:
000000-1109-741
Iris stop slider mot. for incident-light equipment
Iris stop slider mot. for incident-light equipment
Item no.:
423646-0000-000
Iris stop slider mot. for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path)
Item no.:
423646-0000-000
Reflector module FL EC ACR P&C
Reflector module FL EC ACR P&C
Item no.:
424933-0000-000
Reflector module FL EC ACR P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Item no.:
423607-9901-000
Reflector module FL EC P&C
Reflector module FL EC P&C
Item no.:
424931-0000-000
Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Item no.:
423607-9901-000
Reflector module FL EC P&C
Reflector module FL EC P&C
Item no.:
424931-0000-000
Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Item no.:
423607-9901-000
Reflector module FL EC P&C
Reflector module FL EC P&C
Item no.:
424931-0000-000
Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Item no.:
423607-9901-000
Reflector module FL EC P&C
Reflector module FL EC P&C
Item no.:
424931-0000-000
Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%
Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90
Item no.:
423053-9074-000
Illumination adapter for light guide (D)
Illumination adapter for light guide (D)
Item no.:
423302-0000-000
Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm
Item no.:
423302-0000-000
Illuminator HXP 120 V (D)
Illuminator HXP 120 V (D)
Item no.:
423013-9010-000
Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Item no.:
423052-9730-000
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Item no.:
423052-9730-000
Illuminator microLED 3
Illuminator microLED 3
Item no.:
423053-9074-000
Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Item no.:
423052-9730-000
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Item no.:
423052-9730-000
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV
Item no.:
423052-9730-000
Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Item no.:
423052-9770-000
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Item no.:
423052-9770-000
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV
Item no.:
423052-9770-000
Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
4-position CAN hub for microscope stands with CAN interface
4-position CAN hub for microscope stands with CAN interface
Item no.:
432927-9050-000
4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario
4-position CAN hub for microscope stands with CAN interface
4-position CAN hub for microscope stands with CAN interface
Item no.:
432927-9050-000
4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario
4-position CAN hub for microscope stands with CAN interface
4-position CAN hub for microscope stands with CAN interface
Item no.:
432927-9050-000
4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario
4-position CAN hub for microscope stands with CAN interface
4-position CAN hub for microscope stands with CAN interface
Item no.:
432927-9050-000
4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario
Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO
Item no.:
432031-9902-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Item no.:
451352-0000-000
Electronic Coaxial Drive; CAN (D)
Electronic Coaxial Drive; CAN (D)
Item no.:
432904-9901-000
Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K-SF
Universal mounting frame K-SF
Item no.:
432342-9000-000
Universal mounting frame K-SF - for multiwell plates with foot print 125...127 mm x 83...86 mm - recommended for AI Sample Finder with maximum usable skirt height 2.5 mm - frame size 160 x 110 mm
Item no.:
432342-9000-000
Universal mounting frame K-M
Universal mounting frame K-M
Item no.:
432341-9100-000
Universal mounting frame K-M for multiwell plates of different manufacturers. - Three adjustable clamping springs for adaption to different plate sizes - base frame for Click-In System - four silicone sealed channels for the lead- through of tubes or cables - CO2/O2 incubation with CO2-cover HM - foot print 125...127 mm x 83...86 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K-M
Universal mounting frame K-M
Item no.:
432341-9100-000
Universal mounting frame K-M for multiwell plates of different manufacturers. - Three adjustable clamping springs for adaption to different plate sizes - base frame for Click-In System - four silicone sealed channels for the lead- through of tubes or cables - CO2/O2 incubation with CO2-cover HM - foot print 125...127 mm x 83...86 mm
Item no.:
432341-9100-000
Universal mounting frame K-SF
Universal mounting frame K-SF
Item no.:
432342-9000-000
Universal mounting frame K-SF - for multiwell plates with foot print 125...127 mm x 83...86 mm - recommended for AI Sample Finder with maximum usable skirt height 2.5 mm - frame size 160 x 110 mm
Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr
Item no.:
432029-9904-000
Universal mounting frame K
Universal mounting frame K
Item no.:
451352-0000-000
Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm
Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light
Item no.:
427809-9000-000
Phosphorescence block filter for LED transmitted-light illumination
Phosphorescence block filter for LED transmitted-light illumination
Item no.:
427918-9000-000
Phosphorescence block filter for LED transmitted-light illumination
Item no.:
427918-9000-000
Filter set 90 HE LED (E)
Filter set 90 HE LED (E)
Item no.:
489090-9110-000
Filter set 90 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.
Item no.:
489090-9110-000
Filter set 92 HE LED (E)
Filter set 92 HE LED (E)
Item no.:
489092-9110-000
Filter set 92 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, GFP and mCherry with excitation wavelengths 385, 475 and 590 nm. Contains beam splitter TBS 405 + 493 + 610 and emission filter TBP 425/30 + 524/50 + 688/145.
Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70
Item no.:
489064-0000-000
Filter set 43 HE Cy 3 shift free (E)
Filter set 43 HE Cy 3 shift free (E)
Item no.:
489043-9901-000
Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70
Item no.:
489043-9901-000
Filter Set 96 HE BFP shift free (E)
Filter Set 96 HE BFP shift free (E)
Item no.:
489096-9100-000
Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40
Item no.:
489096-9100-000
Filter set 38 HE eGFP shift free (E)
Filter set 38 HE eGFP shift free (E)
Item no.:
489038-9901-000
Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50
Item no.:
489038-9901-000
Filter set 90 HE LED (E)
Filter set 90 HE LED (E)
Item no.:
489090-9110-000
Filter set 90 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.
Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70
Item no.:
489064-0000-000
Filter set 38 HE eGFP shift free (E)
Filter set 38 HE eGFP shift free (E)
Item no.:
489038-9901-000
Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50
Item no.:
489038-9901-000
Filter set 90 HE LED (E)
Filter set 90 HE LED (E)
Item no.:
489090-9110-000
Filter set 90 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.
Item no.:
489090-9110-000
Filter Set 96 HE BFP shift free (E)
Filter Set 96 HE BFP shift free (E)
Item no.:
489096-9100-000
Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40
Item no.:
489096-9100-000
Filter set 43 HE Cy 3 shift free (E)
Filter set 43 HE Cy 3 shift free (E)
Item no.:
489043-9901-000
Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70
Filter set 92 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, GFP and mCherry with excitation wavelengths 385, 475 and 590 nm. Contains beam splitter TBS 405 + 493 + 610 and emission filter TBP 425/30 + 524/50 + 688/145.
Item no.:
489092-9110-000
Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5
Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5
Item no.:
489090-9120-000
Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45
Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70
Item no.:
489064-0000-000
Filter set 43 HE Cy 3 shift free (E)
Filter set 43 HE Cy 3 shift free (E)
Item no.:
489043-9901-000
Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70
Item no.:
489043-9901-000
Filter set 38 HE eGFP shift free (E)
Filter set 38 HE eGFP shift free (E)
Item no.:
489038-9901-000
Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50
Item no.:
489038-9901-000
Filter set 50 Cy 5 shift free (E)
Filter set 50 Cy 5 shift free (E)
Item no.:
488050-9901-000
Filter set 50 Cy 5 shift free (E) EX BP 640/30, BS FT 660, EM BP 690/50
Item no.:
488050-9901-000
Filter Set 96 HE BFP shift free (E)
Filter Set 96 HE BFP shift free (E)
Item no.:
489096-9100-000
Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40
Item no.:
489096-9100-000
Filter Set 112 HE LED (E)
Filter Set 112 HE LED (E)
Item no.:
489112-9110-000
Filter Set 112 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, FITC, DsRed, Cy5 and Cy7 with excitation wavelengths 385, 475, 555, 630 and 735 nm. Contains beam splitter PBS 405 + 493 + 575 + 654 + 761 and emission filter PBP 425/30 + 514/31 + 592/25 + 681/45 + 785/38.
Filter Set 91 LED SBP CFP+YFP+AF594 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65
Item no.:
489091-9120-000
Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7
Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7
Item no.:
489112-9120-000
Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38
Objective LD LCI Plan-Apochromat 40x/1.2 Imm Corr DIC M27 for water, silicon oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.41mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc
Objective LD LCI Plan-Apochromat 40x/1.2 Imm Corr DIC M27 for water, silicon oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.41mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
LD condenser 0.55 mot.; AI Sample Finder - with motor operated aperture diaphragm and 7 turret disc positions for H, Ph1, Ph2, Ph3, 2x DIC as well as additional position for autofocus and coherence contrast - LED array for contrast enhancement in the overview image - Camera module for overview image - Deflecting mirror for LD condenser 0.55 mot. AI Sample Finder - Calibration plate 160x110 AI Sample Finder - WD=26 mm - for objective magnifications 4,0x-100x
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.
Item no.:
000000-2121-749
Stage Controller XY STEP SMC 2009
Stage Controller XY STEP SMC 2009
Item no.:
432929-9011-000
Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord
Item no.:
432929-9011-000
Joystick XY; CAN (D)
Joystick XY; CAN (D)
Item no.:
432903-9011-000
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Objective ring ACR for objective sleeve cylindrical long
Objective ring ACR for objective sleeve cylindrical long
Item no.:
424511-0000-000
Objective ring ACR for objective sleeve cylindrical long
Item no.:
424511-0000-000
Objective ring ACR for objective sleeve conical long
Objective ring ACR for objective sleeve conical long
Item no.:
424510-0000-000
Objective ring ACR for objective sleeve conical long
Item no.:
424510-0000-000
Objective ring ACR for objective sleeve cylindrical short
Objective ring ACR for objective sleeve cylindrical short
Item no.:
424508-0000-000
Objective ring ACR for objective sleeve cylindrical short
Item no.:
424508-0000-000
Objective ring ACR for objective sleeve conical short
Objective ring ACR for objective sleeve conical short
Item no.:
424509-0000-000
Objective ring ACR for objective sleeve conical short
Item no.:
424509-0000-000
Autoimmersion module
Autoimmersion module
Item no.:
433801-9040-000
Autoimmersion module for selected water immersion objectives on Axio Observer 7 controllable by ZEN blue software and TFT consisting of: Pump module with CAN connection cable Tube holder for nosepiece Transparent objective ring with feed pipette holder 3x Feed pipette with tube Adapter for feed pipette Water absorption rings (foam rings), 1x small, 1x large Liquid reservoir (threaded bottle) Syringe set with Luer lock connector Spare tubing 550 mm
Objective ring ACR for objective sleeve cylindrical short
Objective ring ACR for objective sleeve cylindrical short
Item no.:
424508-0000-000
Objective ring ACR for objective sleeve cylindrical short
Item no.:
424508-0000-000
Objective ring ACR for objective sleeve conical short
Objective ring ACR for objective sleeve conical short
Item no.:
424509-0000-000
Objective ring ACR for objective sleeve conical short
Item no.:
424509-0000-000
Objective ring ACR for objective sleeve conical long
Objective ring ACR for objective sleeve conical long
Item no.:
424510-0000-000
Objective ring ACR for objective sleeve conical long
Item no.:
424510-0000-000
Objective ring ACR for objective sleeve cylindrical long
Objective ring ACR for objective sleeve cylindrical long
Item no.:
424511-0000-000
Objective ring ACR for objective sleeve cylindrical long
Item no.:
424511-0000-000
CAN Distributor for Motorized Objectives and Filter Wheels
CAN Distributor for Motorized Objectives and Filter Wheels
Item no.:
420852-9000-000
CAN Distributor for Motorized Objectives and Filter Wheels for up to 3 objectives autocorr and 1-2 filter wheels
Item no.:
420852-9000-000
Autoimmersion module
Autoimmersion module
Item no.:
433801-9040-000
Autoimmersion module for selected water immersion objectives on Axio Observer 7 controllable by ZEN blue software and TFT consisting of: Pump module with CAN connection cable Tube holder for nosepiece Transparent objective ring with feed pipette holder 3x Feed pipette with tube Adapter for feed pipette Water absorption rings (foam rings), 1x small, 1x large Liquid reservoir (threaded bottle) Syringe set with Luer lock connector Spare tubing 550 mm
Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
Item no.:
410350-2702-000
Language Pack English US (O)
Language Pack English US (O)
Item no.:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
Item no.:
410380-0200-000
Microscopy Workstation Premium (HP Z8 G5) (O)
Microscopy Workstation Premium (HP Z8 G5) (O)
Item no.:
410203-9914-000
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Item no.:
410331-2800-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2800-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Item no.:
410358-0505-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410358-0505-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
Item no.:
426557-0001-000
Microscopy Camera Axiocam 807 mono (D)
Microscopy Camera Axiocam 807 mono (D)
Item no.:
426560-9160-000
Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Language Pack English UK (O) - Keyboard with English (UK) layout
Item no.:
410380-0300-000
Monitor TFT 27" HP Z27q G3 (68 cm) (O)
Monitor TFT 27" HP Z27q G3 (68 cm) (O)
Item no.:
410350-2702-000
Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
Item no.:
410350-2702-000
Microscopy Workstation Premium (HP Z8 G5) (O)
Microscopy Workstation Premium (HP Z8 G5) (O)
Item no.:
410203-9914-000
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Graphics Card NVIDIA RTX A5000 24 GB DP (O)
Graphics Card NVIDIA RTX A5000 24 GB DP (O)
Item no.:
410331-2900-000
Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2900-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Item no.:
410358-0505-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410358-0505-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
Item no.:
426557-0001-000
Microscopy Camera Axiocam 807 mono (D)
Microscopy Camera Axiocam 807 mono (D)
Item no.:
426560-9160-000
Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Item no.:
410331-2800-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2800-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Item no.:
410358-0505-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410358-0505-000
Language Pack English US (O)
Language Pack English US (O)
Item no.:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
Item no.:
410380-0200-000
Microscopy Camera Axiocam 807 mono (D)
Microscopy Camera Axiocam 807 mono (D)
Item no.:
426560-9160-000
Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Item no.:
426560-9160-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
Item no.:
410350-2702-000
Language Pack English UK (O)
Language Pack English UK (O)
Item no.:
410380-0300-000
Language Pack English UK (O) - Keyboard with English (UK) layout
Item no.:
410380-0300-000
Microscopy Workstation Premium (HP Z8 G5) (O)
Microscopy Workstation Premium (HP Z8 G5) (O)
Item no.:
410203-9914-000
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
000000-2615-590
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Item no.:
410330-1200-000
Processor Intel Xeon W7-3455 (HP Z8 G5) (O) High performance processor configuration - Intel Xeon W7-3455 (2.5 GHz, 67.5 MB cache, 24 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Item no.:
410331-2800-000
Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2800-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Item no.:
410358-0505-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410358-0505-000
Microscopy Camera Axiocam 820 mono
Microscopy Camera Axiocam 820 mono
Item no.:
426560-9190-000
Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Item no.:
426560-9190-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2800-000
Monitor TFT 27" HP Z27q G3 (68 cm) (O)
Monitor TFT 27" HP Z27q G3 (68 cm) (O)
Item no.:
410350-2702-000
Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
Item no.:
410350-2702-000
Language Pack English US (O)
Language Pack English US (O)
Item no.:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
Item no.:
410380-0200-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)
Item no.:
410358-0505-000
Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Item no.:
410330-1200-000
Processor Intel Xeon W7-3455 (HP Z8 G5) (O) High performance processor configuration - Intel Xeon W7-3455 (2.5 GHz, 67.5 MB cache, 24 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410330-1200-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
000000-2615-590
Microscopy Workstation Premium (HP Z8 G5) (O)
Microscopy Workstation Premium (HP Z8 G5) (O)
Item no.:
410203-9914-000
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
Item no.:
426557-0001-000
Microscopy Camera Axiocam 820 mono
Microscopy Camera Axiocam 820 mono
Item no.:
426560-9190-000
Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
Item no.:
410203-9914-000
System Configuration 2 for HP Z8 G5 (O)
System Configuration 2 for HP Z8 G5 (O)
Item no.:
000000-2615-590
System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
000000-2615-590
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Processor Intel Xeon W7-3455 (HP Z8 G5) (O)
Item no.:
410330-1200-000
Processor Intel Xeon W7-3455 (HP Z8 G5) (O) High performance processor configuration - Intel Xeon W7-3455 (2.5 GHz, 67.5 MB cache, 24 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Item no.:
410303-3206-000
Graphics Card NVIDIA RTX A5000 24 GB DP (O)
Graphics Card NVIDIA RTX A5000 24 GB DP (O)
Item no.:
410331-2900-000
Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Item no.:
410331-2900-000
Language Pack English US (O)
Language Pack English US (O)
Item no.:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
Item no.:
410380-0200-000
Microscopy Camera Axiocam 820 mono
Microscopy Camera Axiocam 820 mono
Item no.:
426560-9190-000
Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.
Item no.:
426560-9190-000
Trigger Cable Set Axiocam 5xx/7xx (D)
Trigger Cable Set Axiocam 5xx/7xx (D)
Item no.:
426557-0001-000
Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Bio Apps
ZEN Toolkit Bio Apps
Item no.:
410136-0175-310
ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.
Item no.:
410136-0175-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Bio Apps
ZEN Toolkit Bio Apps
Item no.:
410136-0175-310
ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.
Item no.:
410136-0175-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
Item no.:
410136-0165-310
ZEN Toolkit Deconvolution
ZEN Toolkit Deconvolution
Item no.:
410136-0173-370
ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode.
ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.
Item no.:
410136-0175-310
ZEN 3.10
ZEN 3.10
Item no.:
410135-0002-310
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
Item no.:
410136-0165-310
ZEN Toolkit 2D
ZEN Toolkit 2D
Item no.:
410136-0168-360
ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Bio Apps
ZEN Toolkit Bio Apps
Item no.:
410136-0175-310
ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.
Item no.:
410136-0175-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
Item no.:
410136-0165-310
ZEN Toolkit Smart Acquisition
ZEN Toolkit Smart Acquisition
Item no.:
410136-0167-360
ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).
Item no.:
410136-0167-360
ZEN Toolkit 2D
ZEN Toolkit 2D
Item no.:
410136-0168-360
ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.
Item no.:
410136-0168-360
ZEN Toolkit AI
ZEN Toolkit AI
Item no.:
410136-0169-380
ZEN Toolkit AI Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services.
ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
Item no.:
410135-0002-310
ZEN Toolkit Motorized Acquisition
ZEN Toolkit Motorized Acquisition
Item no.:
410136-0165-310
ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image
Item no.:
410136-0165-310
ZEN Toolkit Deconvolution
ZEN Toolkit Deconvolution
Item no.:
410136-0173-370
ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode.
Item no.:
410136-0173-370
ZEN Toolkit Molecular Quantification
ZEN Toolkit Molecular Quantification
Item no.:
410136-0174-370
ZEN Toolkit Molecular Quantification Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color-coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either a tall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).
Item no.:
410136-0174-370
ZEN Toolkit 2D
ZEN Toolkit 2D
Item no.:
410136-0168-360
ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.
Glass Lid CO2/O2 heated, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for ibidi® Heated Plate K with 3 inserts and ibidi® Mounting frame K for multiwell plates - Temperature range: ambient to 45°C - Compatible with DIC contrast - 4 openings for perfusion tubing (width 3 mm, height 7 mm) - Opening for humidity sensor (part of ibidi® Gas Mixer System) - Luer Lock Connector for heated gas tubing (ibidi® Gas Mixer System) - The Gasmixer System requires pressured air (1 bar) - Observation area: 142 mm x 70 mm - Outer dimensions: 160 mm x 110 mm x 19 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9000-000
Gas Mixer System CO2, ibidi (D)
Gas Mixer System CO2, ibidi (D)
Item no.:
433617-9030-000
Gas Mixer System CO2, ibidi® (D) For CO2 control and humidification - Includes controller, humidifying column and humidity sensor to be mounted at Glass Lid CO2/O2 heated/unheated - Includes 2 x 5m gas tubing (PUN-H) - The Gas Mixer System requires pressured air (1 bar ) Software: - ibidi® IncuControl - CO2 regulation up to 15% - CO2: resolution 0.1%, precision +/- 0.35% at 5% CO2 - Humidity regulation: 20-99%, resolution 1%, precision +/- 5% - no manual calibration required Connections: - Input channel for humidity sensor for feedback regulation - USB- and CAN connection - External power supply 100-240V / 50-60Hz / max. 1.4 A; Output: 24V DC / max. A, 120W; with country specific plug - Dimensions controller: 170 mm x 230 mm x 90mm (W x D x H) - Dimensions humidifying column: 70 mm x 110 mm x 300 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9030-000
Temperature Controller, ibidi (D)
Temperature Controller, ibidi (D)
Item no.:
433617-9020-000
Temperature Controller, ibidi® (D) - For temperature control of up to 4 electrically heated components: Glass Lid CO2/O2 heated, ibidi® Heated Plate K with 3 inserts, ibidi® Heating Unit XL (PeCon) Objective heater (PeCon) -includes Temperature Adjustment Set: -Type K thermocouple and 3 dishes for temperature adjustment (µ-Dish 35 and 50 mm, µ-Slide 8 well) Connections: - Input channel for thermocouple to control sample temperature - USB and CAN connection Software: - ibidi® IncuControl Resolution. 0.1°C Precision: +/- 0.5°C Temperature Control Range: Channel 1 (Heated Lid): Ambient temperature (min. 18°C) to +46°C Channel 2 (Heated Plate): Ambient temperature (min. 18°C) to +45°C - incl. power supply 100-240V / 50 - 60Hz; Output: max. 2A; 24V DC / max. 6.67A 160W - Dimension: 230 mm x 170 mm x 90 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9020-000
Heated plate K with 3 inserts, ibidi (D)
Heated plate K with 3 inserts, ibidi (D)
Item no.:
433617-9010-000
Heated plate K with 3 inserts, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for mechanical and scanning stages with opening 160 x 110 mm - Including inserts for: - Slides and Chamber Slides (62...78 mm length to 26.5 mm width or 57...70 mm length to 27.5 mm width) - 35 mm Petri dishes (32 - 44 mm diameter, 9 - 14 mm height) - 60 mm Petri dishes (48 - 68 mm diameter, 9 - 14 mm height) - Temperature range: ambient to 45°C - Outer dimensions: 160 mm x 130 mm x 12 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Gas Mixer System CO2, ibidi® (D) For CO2 control and humidification - Includes controller, humidifying column and humidity sensor to be mounted at Glass Lid CO2/O2 heated/unheated - Includes 2 x 5m gas tubing (PUN-H) - The Gas Mixer System requires pressured air (1 bar ) Software: - ibidi® IncuControl - CO2 regulation up to 15% - CO2: resolution 0.1%, precision +/- 0.35% at 5% CO2 - Humidity regulation: 20-99%, resolution 1%, precision +/- 5% - no manual calibration required Connections: - Input channel for humidity sensor for feedback regulation - USB- and CAN connection - External power supply 100-240V / 50-60Hz / max. 1.4 A; Output: 24V DC / max. A, 120W; with country specific plug - Dimensions controller: 170 mm x 230 mm x 90mm (W x D x H) - Dimensions humidifying column: 70 mm x 110 mm x 300 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9030-000
Temperature Controller, ibidi (D)
Temperature Controller, ibidi (D)
Item no.:
433617-9020-000
Temperature Controller, ibidi® (D) - For temperature control of up to 4 electrically heated components: Glass Lid CO2/O2 heated, ibidi® Heated Plate K with 3 inserts, ibidi® Heating Unit XL (PeCon) Objective heater (PeCon) -includes Temperature Adjustment Set: -Type K thermocouple and 3 dishes for temperature adjustment (µ-Dish 35 and 50 mm, µ-Slide 8 well) Connections: - Input channel for thermocouple to control sample temperature - USB and CAN connection Software: - ibidi® IncuControl Resolution. 0.1°C Precision: +/- 0.5°C Temperature Control Range: Channel 1 (Heated Lid): Ambient temperature (min. 18°C) to +46°C Channel 2 (Heated Plate): Ambient temperature (min. 18°C) to +45°C - incl. power supply 100-240V / 50 - 60Hz; Output: max. 2A; 24V DC / max. 6.67A 160W - Dimension: 230 mm x 170 mm x 90 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9020-000
Glass Lid CO2/O2 heated, ibidi (D)
Glass Lid CO2/O2 heated, ibidi (D)
Item no.:
433617-9000-000
Glass Lid CO2/O2 heated, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for ibidi® Heated Plate K with 3 inserts and ibidi® Mounting frame K for multiwell plates - Temperature range: ambient to 45°C - Compatible with DIC contrast - 4 openings for perfusion tubing (width 3 mm, height 7 mm) - Opening for humidity sensor (part of ibidi® Gas Mixer System) - Luer Lock Connector for heated gas tubing (ibidi® Gas Mixer System) - The Gasmixer System requires pressured air (1 bar) - Observation area: 142 mm x 70 mm - Outer dimensions: 160 mm x 110 mm x 19 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Item no.:
433617-9000-000
Heated plate K with 3 inserts, ibidi (D)
Heated plate K with 3 inserts, ibidi (D)
Item no.:
433617-9010-000
Heated plate K with 3 inserts, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for mechanical and scanning stages with opening 160 x 110 mm - Including inserts for: - Slides and Chamber Slides (62...78 mm length to 26.5 mm width or 57...70 mm length to 27.5 mm width) - 35 mm Petri dishes (32 - 44 mm diameter, 9 - 14 mm height) - 60 mm Petri dishes (48 - 68 mm diameter, 9 - 14 mm height) - Temperature range: ambient to 45°C - Outer dimensions: 160 mm x 130 mm x 12 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH
Slider assembly Apotome 3 for Axio Observer consisting of: slider with control electronics and transmission grids with 3 frequencies, reflector module calibration Apotome ACR P<(>&<)>C for LED and white light source, mirror and fluorescence test slides, cable CAN-BUS, case.
PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)
PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)
Item no.:
430039-9021-000
PC Interface Microscope and Trigger for Celldiscoverer 7 (D) Trigger board for TTL trigger output and analysis. with precise trigger control of Celldiscoverer 7, LSM and up to two triggerable cameras.