Axioscope 5 FL Set with Colibri 3 and N-Achroplan objectives

Microscope stand Axioscope 5, TL/FL, 6xH DIC encoded, Module Consists of: - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 100W - dovetail mount for attachable stage carriers - 24 mm focus lift, adjustable focus stop - auto mechanical safety shutter - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 60W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - snap button supports on ZEISS Axiocam - USB 2.0 to PC - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP /Colibri - nosepiece 6xH DIC,M27, encoded - dovetail mount for coded changeable reflector turrets and reflector slider - mount for luminous-field diaphragm slider - mount for aperture stop slider or FL attenuator - mount for adjusting aid for HBO/XBO - mount for filter slider R, 14x40 mm d=25mm Additionally included: - 2x Eyepiece PL 10x/23 Br. foc. - 2x Eyepiece eyecup

Stage carrier, detachable, Module Consisting of: -Stage carrier D/A; attachable and vertically adjustable for Axioscope, to accommodate screw-on stages -Condenser carrier with vertical adjustment on both sides for use with attachable Axio Scope stage carriers, adjustable height stop

Reflector turret 4x encoded, changeable, Module - for P & C modules

Solid-State Light source Colibri 3, Type RGB-UV, Module Consisting of: 4-channel fluorescence light source with integrated control unit in Axioscope stand for continuous brightness adjustment, quickly switchable and adjustable by stand alone, OnScreenDisplay (OSD) in Axiocam 202, software Labscope App Equipped with 4 solid state LED lamps. - Red (625nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) forexcitation of eGFP, Fluo4, FITC and similar dyes - UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 Additionally included: - Antiglare screen - Reflector module FL EC P<(>&<)>C (Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm) - Filter set 90 HE LED (for use with the illumination system Colibri 3/5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.)

Mechanical stage 75x50 R with hardcoat anodized surface, Module Consisting of: 220 x 170 mm stage plate, rackless X-guide positioned at bottom, hidden gear in Y-guide, right drive 135 mm (extendable by 15 mm), with friction setting

Specimen holder for two slides 76x26mm, spring lever left, Module

Binocular phototube 30°/23 (100:0/0:100) module Consists of: - Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch, Camera port with interface 60N

Objective N-Achroplan 5x/0.15 M27 (FWD=12.0mm)

Objective N-Achroplan 20x/0.45 M27 (FWD=0.63mm)

Objective N-Achroplan 40x/0.65 M27 (FWD=0.60mm)

Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Objective N-Achroplan 10x/0.25 Ph1 M27 (FWD=6.5mm)

Condenser module, achromatic-aplanatic 0.9 BF DF Ph DIC Consists of: - Condenser, achromatic-aplanatic 0.9 BF DF Ph DIC with front lens switchable on the left and right, 5-position modulator disk, 4 centerable positions with Ph1, Ph2, Ph3 and dark-field stop 0.75, 1 bright-field position with aperture stop, Alternative use of up to 4 DIC prisms / slit-diaphragms PlasDIC possible instead of the Ph/D stops, For objectives 1.0-100x, WD=1.0mm