Axiovert 7

Axiovert 7

+3

Variants Axiovert 7 You can customize this list by removing one or more columns. Show all variants (3) Show all Hide all	Axiovert 7 RL f/BF Item no.: 491239-0018-000	Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000	Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000

Variants Axiovert 7 You can customize this list by removing one or more columns. Show all variants (3) Show all Hide all	example picture Axiovert 7 RL f/BF Item no.: 491239-0018-000 Axiovert 7 RL f/BF Item no.: 491239-0018-000 Inverted microscope Axiovert 7 RL for reflected-light brightfield with objectives EC Epiplan and Axiocam 305 color Inverted microscope Axiovert 7 RL for reflected-light bright...	example picture Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000 Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000 Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Non-metallic inclusion analysis (NMI) is a standard based application with technical minimum requirements regarding the microscope, digital camera and PC hardware. Modifications are only possible after consultation with the support. Including bright field, objectives EC Epiplan 5x/10x, camera, joystick, stand, scanning stage, workstation, monitor, ZEN core and modules for NMI. Microscope Axiovert 7 complete system for Non-Metallic-Inclu...	example picture Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000 Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000 Inverted microscope Axiovert 7 RL for reflected-light brightfield, darkfield, circular DIC and polarization, with objectives EC Epiplan-Neofluar and Axiocam 305 color Inverted microscope Axiovert 7 RL for reflected-light bright...
Microscope stands inverted	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P&C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BDwith white LED 10W (average LED lifetime > 60000 hrs), slider mounts for luminous-field diaphragm, aperture stop, polarizer- and filter slider - interface for alternative HAL 100 illuminator - motorized focus drive (resolution 78 nm) - 13 mm focuslift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Ergo intermediate piece H=50 mm for optimization of viewing height Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000 Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P&C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BDwith white LED 10W (average LED lifetime > 60000 hrs), slider mounts for luminous-field diaphragm, aperture stop, polarizer- and filter slider - interface for alternative HAL 100 illuminator - motorized focus drive (resolution 78 nm) - 13 mm focuslift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Intermediate phototube H=50mm, left port Intermediate phototube H=50mm, left port Item no.: 425146-9031-000 Intermediate phototube H=50mm, left port - Camera port with interface 60N - Slider mount with 2 clickstop positions Additionally required: - Slider with mirror 100% - Slider with beam splitter 50% - Slider with beam splitter 20/80% Item no.: 425146-9031-000 Slider with Mirror 100% for Intermediate Phototube Slider with Mirror 100% for Intermediate Phototube Item no.: 425146-9051-000 Slider with Mirror 100% for Intermediate Phototube - 2 clickstop positions for 100vis/100doc Item no.: 425146-9051-000	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P&C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BDwith white LED 10W (average LED lifetime > 60000 hrs), slider mounts for luminous-field diaphragm, aperture stop, polarizer- and filter slider - interface for alternative HAL 100 illuminator - motorized focus drive (resolution 78 nm) - 13 mm focuslift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Ergo intermediate piece H=50 mm for optimization of viewing height Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000 Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000
Stand accessories	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000
Reflected-light illumination	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module polarizer ACR P&C for reflected light Reflector module polarizer ACR P&C for reflected light Item no.: 424923-9901-000 Reflector module polarizer ACR P&C for reflected light Item no.: 424923-9901-000 Reflector module C-DIC/TIC ACR P&C for reflected light Reflector module C-DIC/TIC ACR P&C for reflected light Item no.: 424941-9000-000 Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization Item no.: 424941-9000-000 Reflector module dark field ACR P&C for reflected light Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000
Lamp power supply cable	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000
Stages and accessories	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame K; low profile, for reflected light, d=72 mm Mounting frame K; low profile, for reflected light, d=72 mm Item no.: 432334-9001-000 Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm Item no.: 432334-9001-000 Stage insert, metal; D=72 mm, d=10 mm Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=23 mm Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame for steel specimen (D) Mounting frame for steel specimen (D) Item no.: 432322-9000-000 Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm Item no.: 432322-9000-000 Universal mounting frame K Universal mounting frame K Item no.: 451352-0000-000 Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm Item no.: 451352-0000-000	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame K; low profile, for reflected light, d=72 mm Mounting frame K; low profile, for reflected light, d=72 mm Item no.: 432334-9001-000 Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm Item no.: 432334-9001-000 Stage insert, metal; D=72 mm, d=23 mm Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=10 mm Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000
Tubes and accessories	Tubes and accessories Binocular phototube, left port 45°/23 (50:50) Binocular phototube, left port 45°/23 (50:50) Item no.: 425523-9020-000 Binocular phototube, left port 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N Item no.: 425523-9020-000	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425523-9000-000 Binocular tube 45°/23 - upright and unreversed image Item no.: 425523-9000-000	Tubes and accessories Binocular phototube, left port 45°/23 (50:50) Binocular phototube, left port 45°/23 (50:50) Item no.: 425523-9020-000 Binocular phototube, left port 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N Item no.: 425523-9020-000
Filters	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000	Filters Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000
Video devices	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000	Video devices Camera Adapter 60N-C 2/3" 0.5x Camera Adapter 60N-C 2/3" 0.5x Item no.: 426112-0000-000 Camera Adapter 60N-C 2/3" 0.5x Item no.: 426112-0000-000
Measuring and counting components	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000
Eyepieces	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000
Eyepiece accessories	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000
Reflected-light objectives	Reflected-light objectives Objective EC Epiplan 5x/0.13 M27 Objective EC Epiplan 5x/0.13 M27 Item no.: 422030-9902-000 Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm) Item no.: 422030-9902-000 Objective EC Epiplan 10x/0.25 M27 Objective EC Epiplan 10x/0.25 M27 Item no.: 422040-9902-000 Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm) Item no.: 422040-9902-000 Objective EC Epiplan 20x/0.4 M27 Objective EC Epiplan 20x/0.4 M27 Item no.: 422050-9903-000 Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm) Item no.: 422050-9903-000 Objective EC Epiplan 50x/0.75 M27 Objective EC Epiplan 50x/0.75 M27 Item no.: 422070-9902-000 Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm) Item no.: 422070-9902-000	Reflected-light objectives Objective EC Epiplan 10x/0.25 M27 Objective EC Epiplan 10x/0.25 M27 Item no.: 422040-9902-000 Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm) Item no.: 422040-9902-000 Objective EC Epiplan 5x/0.13 M27 Objective EC Epiplan 5x/0.13 M27 Item no.: 422030-9902-000 Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm) Item no.: 422030-9902-000	Reflected-light objectives Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 Item no.: 422320-9960-000 Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm) Item no.: 422320-9960-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm) Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm) Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm) Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm) Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Item no.: 000000-1156-514 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm) Item no.: 000000-1156-514
Control devices	Control devices Joystick XY; CAN (D) Joystick XY; CAN (D) Item no.: 432903-9011-000 Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9011-000	Control devices Joystick XY; CAN (D) Joystick XY; CAN (D) Item no.: 432903-9011-000 Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9011-000	Control devices Joystick XY; CAN (D) Joystick XY; CAN (D) Item no.: 432903-9011-000 Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9011-000
Image processing	Image processing Digital Microscopy Camera Axiocam 305 color R2 (D) Digital Microscopy Camera Axiocam 305 color R2 (D) Item no.: 426560-9031-000 Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9031-000	Image processing Microscopy Camera Axiocam 705 color R2 (D) Microscopy Camera Axiocam 705 color R2 (D) Item no.: 426560-9051-000 Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9051-000 Microscopy Workstation Compact HP Z2 G9 (O) Microscopy Workstation Compact HP Z2 G9 (O) Item no.: 410201-9913-000 Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit Item no.: 410201-9913-000 System Configuration 1 for HP Z2 G9 (O) System Configuration 1 for HP Z2 G9 (O) Item no.: 000000-2548-753 System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9 Item no.: 000000-2548-753 Processor Intel Core i7-12700K (HP Z2 G9) (O) Processor Intel Core i7-12700K (HP Z2 G9) (O) Item no.: 410220-0500-000 Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9 Item no.: 410220-0500-000 Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) Item no.: 410201-6401-000 Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9 Item no.: 410201-6401-000 Graphics Card NVIDIA RTX A4000 16 GB DP (O) Graphics Card NVIDIA RTX A4000 16 GB DP (O) Item no.: 410331-2800-000 Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel) Item no.: 410331-2800-000 Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) Item no.: 410323-8000-000 Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9) Item no.: 410323-8000-000 Language Pack English US (O) Language Pack English US (O) Item no.: 410380-0200-000 Language Pack English US (O) - Keyboard with English (US) layout Item no.: 410380-0200-000	Image processing Digital Microscopy Camera Axiocam 305 color R2 (D) Digital Microscopy Camera Axiocam 305 color R2 (D) Item no.: 426560-9031-000 Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9031-000
Software for image processing	Software for image processing ZEN core 3.10 ZEN core 3.10 Item no.: 410135-0011-310 ZEN core 3.10 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating systems: Windows 10 (64-bit) / Windows 11 Item no.: 410135-0011-310	Software for image processing ZEN core 3.10 ZEN core 3.10 Item no.: 410135-0011-310 ZEN core 3.10 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating systems: Windows 10 (64-bit) / Windows 11 Item no.: 410135-0011-310 ZEN Toolkit Motorized Acquisition ZEN Toolkit Motorized Acquisition Item no.: 410136-0165-310 ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image Item no.: 410136-0165-310 ZEN Module Non-Metallic Inclusion Analysis ZEN Module Non-Metallic Inclusion Analysis Item no.: 410136-0106-360 ZEN Module Non-Metallic Inclusion Analysis Software Module for evaluation and rating of non-metallic inclusions in steel (Oxides, Sulfides and Nitrides). The following standards are supported: ASTM E45a, ISO 4967, JIS G0555, GB/T 10561, EN 10247, SEP 1571 and DIN 50602. The scope of delivery includes preconfigured and automated workflows for steel cleanliness analysis and -rating. The provided job templates are available for the user roles Supervisor and Operator and cover image acquisition, result presentation in interactive views for fast inspection and revision of inclusions, single reports with results of characteristic values and standard specific methods per mounted specimen. Furthermore, an overview report with the summary of the characteristic values, statistics and method results per standard for a set of evaluated specimens. Automated storage of generated results and inspection views in the data archive. Archived data can be re-opened and viewed. Optimized workflows for mounted specimen with/without nitride inclusions. The workflows can be conducted with acquired or loaded images. - Adjustable image acquisition settings for microscope and camera for the supervisor. Selectable image acquisition settings for the operator - Standard-measuring-field-based definition of the tiles acquisition area - Standard Template Editor to customize existing standards by copy and edit. Adjustable parameter: minimum particle and inclusion size; particle distance (in direction/perpendicular to main deformation orientation; size ratio for differentiation of globular and elongated inclusions. - Automated parallel analysis of all selected standards - Efficient auto segmentation for oxide, sulfide and nitride detection - Region adaption algorithm for optimized detection of mixed type Oxide/sulfide inclusions (complex, heterogenous inclusions) - Artifact filter for automated filtering of scratches - Advanced artifact filter for automated filtering of sulfide halos - Automated detection of the main deformation orientation (horizontal, vertical) - Standard specific severity rating filter: automated exclusion of inclusions per defined size class - Global result view with inclusion gallery for inspection and revision of objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options and result statistics. Standard results selectable by one mouse click. - Field based result view with acquired specimen image, a grid of standard-measuring-fields, specimen navigation for live inspection and revision of detected objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options per standard specific inclusion types and result statistics with field rating. Interactive selection of multiple objects for artifact classification. - Field based result view with True Worst Field detection: identification of inclusion type specific worst fields that are completely independent of the grid fields. - Standard results selectable by one mouse click. - Joint result table with characteristic core values of all selected standards. - Reports in Microsoft Word (from Microsoft Word 2013) and export as PDF. Automated generation of reports and summary reports for all standards. - Excel export of result tables - Customer database in Excel table format for input forms. Item no.: 410136-0106-360	Software for image processing ZEN core 3.10 ZEN core 3.10 Item no.: 410135-0011-310 ZEN core 3.10 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating systems: Windows 10 (64-bit) / Windows 11 Item no.: 410135-0011-310
Polarization	Polarization	Polarization	Polarization C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x Item no.: 000000-1105-192 C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism Item no.: 000000-1105-192 C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x Item no.: 000000-1105-193 C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism Item no.: 000000-1105-193 Analyzer slider A 12x35 mm, 90° rotatable Analyzer slider A 12x35 mm, 90° rotatable Item no.: 453667-9901-000 Analyzer slider A 12x35 mm, 90° rotatable - mount for lambda compensators - retractable from both sides Item no.: 453667-9901-000 Compensator pol Lambda sub. +/- 10° Compensator pol Lambda sub. +/- 10° Item no.: 453706-0000-000 Compensator pol Lambda sub. +/- 10° Item no.: 453706-0000-000