Home
Upright microscopes
Axio Examiner
Axio Examiner.A1
Fixed Stage microscope Axio Examiner.A1

Axio Examiner.A1

Fixed Stage microscope Axio Examiner.A1

Item no.: 491404-0002-000 (individual configuration)

Description

Fixed Stage microscope Axio Examiner.A1 for electrophysiology for bright field, oblique illumination...

Full description

Fixed Stage microscope Axio Examiner.A1

Item Number: 491404-0002-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Lower microscope part Axio Examiner man.

Recover

Item no.: 430031-9901-000

Lower microscope part Axio Examiner man.

Item Number: 430031-9901-000

Lower microscope part Axio Examiner man. - objective focusing, 15 mm focus lifting range - adapter for objective mount - transmitted light illumination for Axio Examiner with luminous field diaphragm - switchable diffusion disk - mount for Dodt contrast slider - heat-protection filter/ filter IR BP 750-990 for IR contrast method used alternately - 6-position filter turret for dia. 32 mm filters
Upper microscope part D Axio Examiner.A1

Recover

Item no.: 423731-9000-000

Upper microscope part D Axio Examiner.A1

Item Number: 423731-9000-000

Upper microscope part D Axio Examiner.A1 with mount for reflector slider P&C or reflector turret P&C

Aqua Stop for condensers LD 0.8, 0.9 and 1.2

Recover

Item no.: 431717-9000-000

Aqua Stop for condensers LD 0.8, 0.9 and 1.2

Item Number: 431717-9000-000

Aqua Stop for condensers LD 0.8, 0.9 and 1.2 Flexible cover protecting from overflowing liquids in the area of the condenser front lens

Stand accessories

0 added 0 removed

2-position objective turret M27, DIC; Axio Examiner

Recover

Item no.: 424516-9011-000

2-position objective turret M27, DIC; Axio Examiner

Item Number: 424516-9011-000

2-position objective turret M27, DIC; Axio Examiner objective turret changeable by customer - 2 objective mounts M27, 1x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range
Stage carrier Axio Examiner, attachable, with support

Recover

Item no.: 430711-9000-000

Stage carrier Axio Examiner, attachable, with support

Item Number: 430711-9000-000

Stage carrier Axio Examiner, attachable, with support
Condenser carrier Axio Examiner

Recover

Item no.: 430721-9000-000

Condenser carrier Axio Examiner

Item Number: 430721-9000-000

Condenser carrier Axio Examiner

Reflector slider 2x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

Item Number: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Bulbs

0 added 0 removed

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Power supply external for HAL 100 and LED lamps

Recover

Item no.: 432610-9060-000

Power supply external for HAL 100 and LED lamps

Item Number: 432610-9060-000

Power supply external for HAL 100 and LED lamps stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Incl. 2 lamp sockets for HAL 100/VIS-LED with switch. With country-specific line cable.

Polarization

0 added 0 removed

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Recover

Item no.: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Item Number: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I
DIC slider W N Achroplan 40x/0.75 II

Recover

Item no.: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II

Item Number: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II
Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light
Senarmont polarizer DIC

Recover

Item no.: 427710-9010-000

Senarmont polarizer DIC

Item Number: 427710-9010-000

Senarmont polarizer DIC

Stages and accessories

0 added 0 removed

Mechanical stage 75x50 R ergon. drive, fixed position

Recover

Item no.: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position

Item Number: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position
Universal mounting frame for Petri dishes and slides

Recover

Item no.: 432311-9901-000

Universal mounting frame for Petri dishes and slides

Item Number: 432311-9901-000

Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner

Tubes and accessories

0 added 0 removed

Binocular phototube 15°/25 (100:0/0:100), upright image

Recover

Item no.: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image

Item Number: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image adjustable stop, camera port with interface 60N

Intermediate tubes

0 added 0 removed

Filters

0 added 0 removed

Photomicrography

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Objective W N-Achroplan 10x/0.3 M27

Recover

Item no.: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27

Item Number: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27 (FWD=2.6mm)
Objective W N-Achroplan 40x/0.75 M27

Recover

Item no.: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27

Item Number: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27 (FWD=2.1mm)

Immersion oils

0 added 0 removed

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Recover

Item no.: 424516-9070-000

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Item Number: 424516-9070-000

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Condensers

0 added 0 removed

Condenser, achromatic-aplanatic 0.9 H DIC 5x

Recover

Item no.: 424226-9010-000

Condenser, achromatic-aplanatic 0.9 H DIC 5x

Item Number: 424226-9010-000

Condenser, achromatic-aplanatic 0.9 H DIC 5x with - fixed front lens - 5-position modulator disk - 3 mounts for DIC prisms - rotary stop for inclined illumination For objectives 10x-100x (5x-100x with enclosed diffusion disk), WD=1.2 mm
Condenser module DIC I/0.9 Senarmont

Recover

Item no.: 426724-9060-000

Condenser module DIC I/0.9 Senarmont

Item Number: 426724-9060-000

Condenser module DIC I/0.9 Senarmont
Condenser module DIC II/0,9 Senarmont

Recover

Item no.: 426724-9070-000

Condenser module DIC II/0,9 Senarmont

Item Number: 426724-9070-000

Condenser module DIC II/0,9 Senarmont

Connecting cables

0 added 0 removed

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Control devices

0 added 0 removed

Image processing

0 added 0 removed

Dust protection Set L

Recover

Item no.: 434304-0000-000

Dust protection Set L

Item Number: 434304-0000-000

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm

Advertising material

0 added 0 removed

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Fixed Stage microscope Axio Examiner.A1
Item Number: 491404-0002-000 (individual configuration)
Microscope stands upright (4)

Research microscopes

Item has been added to the configuration

Lower microscope part Axio Examiner man.

Recover

Item no.: 430031-9901-000

Lower microscope part Axio Examiner man.

Item Number: 430031-9901-000

Lower microscope part Axio Examiner man. - objective focusing, 15 mm focus lifting range - adapter for objective mount - transmitted light illumination for Axio Examiner with luminous field diaphragm - switchable diffusion disk - mount for Dodt contrast slider - heat-protection filter/ filter IR BP 750-990 for IR contrast method used alternately - 6-position filter turret for dia. 32 mm filters

Item has been added to the configuration

Lower microscope part Axio Examiner mot.

Recover

Item no.: 430031-9012-000

Lower microscope part Axio Examiner mot.

Item Number: 430031-9012-000

Lower microscope part Axio Examiner mot. - motorized objective focusing, 25 nm increments, 100 nm reproducibility, 15 mm focus lifting range - adapter for objective mount - transmitted light illumination for Axio Examiner with luminous field diaphragm - switchable diffusion disk - mount for Dodt contrast slider - heat-protection filter/ filter IR BP 750-990 for IR contrast method used alternately - 6-position filter turret for dia. 32 mm filters

Item has been added to the configuration

Upper microscope part D/ A-FL Axio Examiner.A1

Recover

Item no.: 423731-9110-000

Upper microscope part D/ A-FL Axio Examiner.A1

Item Number: 423731-9110-000

Upper microscope part D/ A-FL Axio Examiner.A1 with - FL reflected-light illumination for HBO/HXP/Colibri with manual safety shutter - integrated luminous-field diaphragm and FL attenuator - mount for reflector slider P&C or reflector turret P&C - mount for filter slider 14x40

Item has been added to the configuration

Upper microscope part D Axio Examiner.A1

Recover

Item no.: 423731-9000-000

Upper microscope part D Axio Examiner.A1

Item Number: 423731-9000-000

Upper microscope part D Axio Examiner.A1 with mount for reflector slider P&C or reflector turret P&C

Microscope stands inverted (1)

Special accessories

Item has been added to the configuration

Aqua Stop for condensers LD 0.8, 0.9 and 1.2

Recover

Item no.: 431717-9000-000

Aqua Stop for condensers LD 0.8, 0.9 and 1.2

Item Number: 431717-9000-000

Aqua Stop for condensers LD 0.8, 0.9 and 1.2 Flexible cover protecting from overflowing liquids in the area of the condenser front lens

Stand accessories (19)

Manual nosepiece

Item has been added to the configuration

4-position objective turret M27, DIC; Axio Examiner

Recover

Item no.: 424516-9060-000

4-position objective turret M27, DIC; Axio Examiner

Item Number: 424516-9060-000

4-position objective turret M27, DIC; Axio Examiner objective turret changeable by customer - 4 objective mounts M27, 3x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range

Item has been added to the configuration

2-position objective turret M27, DIC; Axio Examiner

Recover

Item no.: 424516-9011-000

2-position objective turret M27, DIC; Axio Examiner

Item Number: 424516-9011-000

2-position objective turret M27, DIC; Axio Examiner objective turret changeable by customer - 2 objective mounts M27, 1x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range

Item has been added to the configuration

1-position objective mount M27, DIC; Axio Examiner

Recover

Item no.: 424516-9000-000

1-position objective mount M27, DIC; Axio Examiner

Item Number: 424516-9000-000

1-position objective mount M27, DIC; Axio Examiner objective mount changeable by customer - objective mount M27 - mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range

Stage carrier

Item has been added to the configuration

Stage carrier Axio Examiner, attachable, without support

Recover

Item no.: 430711-9030-000

Stage carrier Axio Examiner, attachable, without support

Item Number: 430711-9030-000

Stage carrier Axio Examiner, attachable, without support for use with scanning stages

Item has been added to the configuration

Stage carrier Axio Examiner, attachable, with support

Recover

Item no.: 430711-9000-000

Stage carrier Axio Examiner, attachable, with support

Item Number: 430711-9000-000

Stage carrier Axio Examiner, attachable, with support

Condenser carrier

Item has been added to the configuration

Condenser carrier Axio Examiner, mot. focus

Recover

Item no.: 430721-9011-000

Condenser carrier Axio Examiner, mot. focus

Item Number: 430721-9011-000

Condenser carrier Axio Examiner, mot. focus - 2 µm increments - 4.5 mm focus lifting range - optional manual operation

Item has been added to the configuration

Condenser carrier Axio Examiner

Recover

Item no.: 430721-9000-000

Condenser carrier Axio Examiner

Item Number: 430721-9000-000

Condenser carrier Axio Examiner

Various stand accessories

Item has been added to the configuration

Docking station with TFT display for Axio Examiner/Axio Imager Vario

Recover

Item no.: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario

Item Number: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario Control module with TFT display, coaxial coarse/fine focusing knobs and freely programmable buttons for the control of motorized Axio Examiner and Axio Imager.Z2 Vario components. Positioning on the desk as required. 30°-45° tilt adjustment of the TFT display

Item has been added to the configuration

Adapter for expansion of specimen area by 30 mm

Recover

Item no.: 430030-9100-000

Adapter for expansion of specimen area by 30 mm

Item Number: 430030-9100-000

Adapter for expansion of specimen area by 30 mm Insert between upper and lower part of the Axio Scope and Axio Examiner microscopes. Expansion to max. sample height of altogether 79 mm (109 mm, if upper microscope parts Axio Examiner.A1 are used)

Item has been added to the configuration

Slider for sideport Axio Examiner with 100% mirror 46x34mm

Recover

Item no.: 423731-9131-000

Slider for sideport Axio Examiner with 100% mirror 46x34mm

Item Number: 423731-9131-000

Slider for sideport Axio Examiner with 100% mirror 46x34mm

Filter slider

Item has been added to the configuration

Filter module ms GFP/mRFP Duolink

Recover

Item no.: 426143-9140-000

Filter module ms GFP/mRFP Duolink

Item Number: 426143-9140-000

Filter module ms GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE ms GFP+mRFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 470/27 for GFP EX BP 556/25 for mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module wl GFP/mRFP Duolink

Recover

Item no.: 426143-9130-000

Filter module wl GFP/mRFP Duolink

Item Number: 426143-9130-000

Filter module wl GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE wl GFP+mRFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 470/27+556/25 for GFP and mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module ms CFP/YFP Duolink

Recover

Item no.: 426143-9120-000

Filter module ms CFP/YFP Duolink

Item Number: 426143-9120-000

Filter module ms CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE ms CFP+YFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 445/25 for CFP EX BP 510/15 for YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter module wl CFP/YFP Duolink

Recover

Item no.: 426143-9110-000

Filter module wl CFP/YFP Duolink

Item Number: 426143-9110-000

Filter module wl CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE wl CFP+YFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 445/25+510/15 for CFP and YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter module 2-position Duolink

Recover

Item no.: 426143-9100-000

Filter module 2-position Duolink

Item Number: 426143-9100-000

Filter module 2-position Duolink with two slots for standard filter sets. - 2x for beam splitter 26 mm x 36 mm, max. thickness 1 mm - 4x for filters d=25 mm, max. thickness 5 mm

Manual reflector turret

Item has been added to the configuration

Reflector turret 4x man., changeable, for P&C modules

Recover

Item no.: 424940-9060-000

Reflector turret 4x man., changeable, for P&C modules

Item Number: 424940-9060-000

Reflector turret 4x man., changeable, for P&C modules

Item has been added to the configuration

Reflector turret 6x man., changeable, for P&C modules

Recover

Item no.: 424940-9000-000

Reflector turret 6x man., changeable, for P&C modules

Item Number: 424940-9000-000

Reflector turret 6x man., changeable, for P&C modules

Coded nosepiece

Item has been added to the configuration

4-position objective turret M27, DIC cod.; Axio Examiner

Recover

Item no.: 424516-9030-000

4-position objective turret M27, DIC cod.; Axio Examiner

Item Number: 424516-9030-000

4-position objective turret M27, DIC cod.; Axio Examiner objective turret changeable by customer - 4 objective mounts M27, 3x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range - position coding via Hall sensors

Item has been added to the configuration

2-position objective turret M27, DIC cod.; Axio Examiner

Recover

Item no.: 424516-9021-000

2-position objective turret M27, DIC cod.; Axio Examiner

Item Number: 424516-9021-000

2-position objective turret M27, DIC cod.; Axio Examiner objective turret changeable by customer - 2 objective mounts M27, 1x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range - position coding via Hall sensors

Transmitted-light illumination (3)

Light shutters

Item has been added to the configuration

Shutter mot. for transmitted-light illumination Axio Examiner

Recover

Item no.: 423731-9060-000

Shutter mot. for transmitted-light illumination Axio Examiner

Item Number: 423731-9060-000

Shutter mot. for transmitted-light illumination Axio Examiner for lower microscope part Axio Examiner mot., switching time <100 ms

Transmitted-light illumination

Item has been added to the configuration

LED lamp module for attachment lamp VIS-LED

Recover

Item no.: 423053-9050-000

LED lamp module for attachment lamp VIS-LED

Item Number: 423053-9050-000

LED lamp module for attachment lamp VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours

Item has been added to the configuration

Attachment lamp VIS-LED with collector

Recover

Item no.: 423053-9030-000

Attachment lamp VIS-LED with collector

Item Number: 423053-9030-000

Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras

Reflected-light illumination (7)

Reflector mounts

Item has been added to the configuration

Reflector slider 2x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

Item Number: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

Item has been added to the configuration

Reflector slider 2x, changeable, for P&C modules

Recover

Item no.: 424940-9050-000

Reflector slider 2x, changeable, for P&C modules

Item Number: 424940-9050-000

Reflector slider 2x, changeable, for P&C modules

Aperture diaphragm slider

Item has been added to the configuration

Slider for Dodt gradient contrast for condensers 1.2

Recover

Item no.: 427300-9030-000

Slider for Dodt gradient contrast for condensers 1.2

Item Number: 427300-9030-000

Slider for Dodt gradient contrast for condensers 1.2

Item has been added to the configuration

Slider for Dodt gradient contrast for condensers 0.9

Recover

Item no.: 427300-9020-000

Slider for Dodt gradient contrast for condensers 0.9

Item Number: 427300-9020-000

Slider for Dodt gradient contrast for condensers 0.9

Item has been added to the configuration

Slider for Dodt gradient contrast for condensers 0.8

Recover

Item no.: 427300-9010-000

Slider for Dodt gradient contrast for condensers 0.8

Item Number: 427300-9010-000

Slider for Dodt gradient contrast for condensers 0.8

Reflector modules

Item has been added to the configuration

Reflector module FL EC P&C

Recover

Item no.: 424931-0000-000

Reflector module FL EC P&C

Item Number: 424931-0000-000

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Various accessories for reflected-light illumination

Item has been added to the configuration

Illumination adapter A, achromatic, Axio Scope, Axio Examiner.A1

Recover

Item no.: 423730-9091-000

Illumination adapter A, achromatic, Axio Scope, Axio Examiner.A1

Item Number: 423730-9091-000

Illumination adapter A, achromatic, Axio Scope, Axio Examiner.A1 usable for reflected light with HAL 100, LED, HXP, Colibri and HBO illuminator

Lamps and Lamp housings (36)

Low-voltage and halogen lamp housings

Item has been added to the configuration

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Switching mirrors

Item has been added to the configuration

Switching mirror for 2 illuminators

Recover

Item no.: 447230-9903-000

Switching mirror for 2 illuminators

Item Number: 447230-9903-000

Switching mirror for 2 illuminators

Adjusting aids

Item has been added to the configuration

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Recover

Item no.: 423730-9120-000

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Item Number: 423730-9120-000

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Various lamp accessories

Item has been added to the configuration

Sheathing for Light Guide HXP for Stabilization

Recover

Item no.: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization

Item Number: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization Stabilization of position of the light guide in operation. Avoidance of variation in illumination uniformity due to unwanted movement of the light guide.

Item has been added to the configuration

LED Trigger Box for Colibri 5/7 and Viluma 5/7

Recover

Item no.: 423052-9760-000

LED Trigger Box for Colibri 5/7 and Viluma 5/7

Item Number: 423052-9760-000

LED Trigger Box for Colibri 5/7 and Viluma 5/7 for signal distribution

Item has been added to the configuration

Control Panel for Colibri 5/7 and Viluma 5/7

Recover

Item no.: 423052-9751-000

Control Panel for Colibri 5/7 and Viluma 5/7

Item Number: 423052-9751-000

Control Panel for Colibri 5/7 and Viluma 5/7 with LCD to display the operating state. For LED selection and brightness setting.

Item has been added to the configuration

Control panel speedDIAL Viluma 9

Recover

Item no.: 423006-9040-000

Control panel speedDIAL Viluma 9

Item Number: 423006-9040-000

Control panel speedDIAL Viluma 9 For manual control of Viluma 9 when sitting at the microscope and without ZEN Software. LED selection, power control, on/off switch.

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Item has been added to the configuration

Shutter remote control for HXP C

Recover

Item no.: 000000-0496-214

Shutter remote control for HXP C

Item Number: 000000-0496-214

Shutter remote control for HXP C incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Adapters

Item has been added to the configuration

Illumination adapter for light guide (D)

Recover

Item no.: 423302-0000-000

Illumination adapter for light guide (D)

Item Number: 423302-0000-000

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

Item has been added to the configuration

Illumination adapter Viluma 9

Recover

Item no.: 423006-9060-000

Illumination adapter Viluma 9

Item Number: 423006-9060-000

Illumination adapter Viluma 9 for mounting the light guide of Viluma 9 at ZEISS microscope stands

Item has been added to the configuration

Extension tube for illuminator mount, l=17.0 mm

Recover

Item no.: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

Item Number: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

LED lamps

Item has been added to the configuration

Illuminator microLED 3

Recover

Item no.: 423053-9074-000

Illuminator microLED 3

Item Number: 423053-9074-000

Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90

Item has been added to the configuration

Light Source Viluma 7 FR-R[G/Y]BV-UV

Recover

Item no.: 423052-9771-000

Light Source Viluma 7 FR-R[G/Y]BV-UV

Item Number: 423052-9771-000

Light Source Viluma 7 FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735 nm) for excitation of Cy7 and similar dyes Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green(555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (423 nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405,Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Recover

Item no.: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Item Number: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Light Source Viluma 7 R[G/Y]CBV-UV

Recover

Item no.: 423052-9742-000

Light Source Viluma 7 R[G/Y]CBV-UV

Item Number: 423052-9742-000

Light Source Viluma 7 R[G/Y]CBV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightnessadjustment. Equipped with 7 excitation lines. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (508 nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (423 nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385 nm) for excitationof DAPI,Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Recover

Item no.: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Item Number: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (511nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Light Source Viluma 7 R[G/Y]B-UV

Recover

Item no.: 423052-9731-000

Light Source Viluma 7 R[G/Y]B-UV

Item Number: 423052-9731-000

Light Source Viluma 7 R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555 nm) for excitation of Cy3, TRITC, DsRed andsimilar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Recover

Item no.: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Item Number: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Light Source Viluma 7 RYB-UV

Recover

Item no.: 423052-9721-000

Light Source Viluma 7 RYB-UV

Item Number: 423052-9721-000

Light Source Viluma 7 RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightnessadjustment. Equipped with 4 solid state LED lamps. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RYB-UV

Recover

Item no.: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV

Item Number: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Light Source Viluma 7 RGB-UV

Recover

Item no.: 423052-9711-000

Light Source Viluma 7 RGB-UV

Item Number: 423052-9711-000

Light Source Viluma 7 RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightnessadjustment. Equipped with 4 solid state LED lamps. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV(385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RGB-UV

Recover

Item no.: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV

Item Number: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Light Source Viluma 5 RGB-UV

Recover

Item no.: 423052-9641-000

Light Source Viluma 5 RGB-UV

Item Number: 423052-9641-000

Light Source Viluma 5 RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cableand a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 5, Type RGB-UV

Recover

Item no.: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV

Item Number: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Illumination system Colibri.2

Recover

Item no.: 423052-9502-000

Illumination system Colibri.2

Item Number: 423052-9502-000

Illumination system Colibri.2 continuously variable, quickly switchable and stable on the long term fluorescence light source incl. control box and control panel for use with up to 4 high brightness LED modules changeable by customer. 3 holder for beam combiner, storage case for Colibri LED modules, storage case for 6 reflector modules P&C, country-specific power cable, CAN-Bus cable and USB extension cable are included in delivery.

Item has been added to the configuration

Light source Viluma 9 UV (XT930Z)

Recover

Item no.: 423006-9030-000

Light source Viluma 9 UV (XT930Z)

Item Number: 423006-9030-000

Light source Viluma 9 UV (XT930Z) 9-channel fluorescence light source with light guide. Equipped with 8 excitation lines with narrowband filters and a filter- free position at 500-600nm. Red (631nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green(555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (508 nm) for excitation of eYFP, Eosin,TOTO-1 and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (423 nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (387 nm) for excitation of FURA-2, DAPI, Hoechst 33258 and similar dyes FURA-UV (340 nm) for excitation of FURA-2 A country-specificpower cable is included in delivery. To mount the light source at the microscope stand Illumination adapter Viluma 9 (423006-9060-000 or 423302-0000-000) is required.

Item has been added to the configuration

Light source Viluma 9 VIS (XT920Z)

Recover

Item no.: 423006-9020-000

Light source Viluma 9 VIS (XT920Z)

Item Number: 423006-9020-000

Light source Viluma 9 VIS (XT920Z) 9-channel fluorescence light source with light guide. Equipped with 8 excitation lines with narrowband filters and a filter- free position at 500-600nm. Far Red (735 nm) for excitation of Cy7 and similar dyes Red (631 nm) forexcitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (591 nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green(555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (508 nm) for excitation of eYFP, Eosin,TOTO-1 and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (423 nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (387 nm) for excitation of DAPI, Alexa 405,Hoechst 33258 and similar dyes Acountry-specific power cable is included in delivery. To mount the light source at the microscope stand Illumination adapter Viluma 9 is required (except for Axio Zoom, where the liquid light guide is directly adapted to the Fluar illuminator Z 435180-9061-000)

Cold-light sources

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

Item has been added to the configuration

Control panel speedDIAL X-Cite Xylis

Recover

Item no.: 423006-9010-000

Control panel speedDIAL X-Cite Xylis

Item Number: 423006-9010-000

Control panel speedDIAL X-Cite Xylis

Item has been added to the configuration

Light Source X-Cite Xylis II

Recover

Item no.: 423006-9001-000

Light Source X-Cite Xylis II

Item Number: 423006-9001-000

Light Source X-Cite Xylis II LED-based white light source for fluorescence excitation Wavelength Range: 380-770 nm LED Peaks (nm): 385, 430, 475, 545, 650, 735 Software control through ZEN Manual control through control panel speedDIAL (optional component, not included) TTL on/off, USB, LED on/off response Times: 100 μs TTL / 1 ms USB Incl. 3 mm liquid light guide (1,5 m) A country-specific power cable is included in delivery. To mount the light source at the microscope stand the Illuminationadapter for light guide is required.

HBO/XBO lamp housing

Item has been added to the configuration

HBO 100 illuminator, self-adjusting with lamp mount and collector

Recover

Item no.: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector

Item Number: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector including heat-reflecting filter and 2m connection cable. Automatic lamp alignment

Item has been added to the configuration

HBO 100 illuminator with lamp mount and collector

Recover

Item no.: 423010-0000-000

HBO 100 illuminator with lamp mount and collector

Item Number: 423010-0000-000

HBO 100 illuminator with lamp mount and collector incl. heat-reflecting filter and 2m connection cable

Item has been added to the configuration

HBO 50 illuminator with collector

Recover

Item no.: 423003-9000-000

HBO 50 illuminator with collector

Item Number: 423003-9000-000

HBO 50 illuminator with collector and lamp mount and heat-reflecting filter

Light guides

Item has been added to the configuration

Light guide 3m for Viluma 9/ X-Cite

Recover

Item no.: 000000-1313-163

Light guide 3m for Viluma 9/ X-Cite

Item Number: 000000-1313-163

Light guide 3m for Viluma 9/ X-Cite

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (5)

Halogen lamps

Item has been added to the configuration

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

LED modules for LED illuminators

Item has been added to the configuration

LED module 505 nm for Colibri

Recover

Item no.: 423052-9061-000

LED module 505 nm for Colibri

Item Number: 423052-9061-000

LED module 505 nm for Colibri

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 50 AC L1 (F)

Recover

Item no.: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item Number: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item has been added to the configuration

Burner Mercury - HBO 103 W/2 (F)

Recover

Item no.: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item Number: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (3)

Power units

Item has been added to the configuration

Power supply external for HAL 100 and LED lamps

Recover

Item no.: 432610-9060-000

Power supply external for HAL 100 and LED lamps

Item Number: 432610-9060-000

Power supply external for HAL 100 and LED lamps stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Incl. 2 lamp sockets for HAL 100/VIS-LED with switch. With country-specific line cable.

Ballasts

Item has been added to the configuration

Control panel with LCD display for FluoArc

Recover

Item no.: 432905-0000-000

Control panel with LCD display for FluoArc

Item Number: 432905-0000-000

Control panel with LCD display for FluoArc

Item has been added to the configuration

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Recover

Item no.: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Item Number: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA with resettable hour meter at the front

Polarization (17)

DIC slider type 0

Item has been added to the configuration

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Recover

Item no.: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Item Number: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

DIC slider type II

Item has been added to the configuration

DIC slider W N Achroplan 40x/0.75 II

Recover

Item no.: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II

Item Number: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II

Item has been added to the configuration

DIC slider LD PN 20x/0.40 II

Recover

Item no.: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item Number: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item has been added to the configuration

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Recover

Item no.: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item Number: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Analyzers

Item has been added to the configuration

Analyzer module D P&C for IR-DIC 770 nm

Recover

Item no.: 424941-9020-000

Analyzer module D P&C for IR-DIC 770 nm

Item Number: 424941-9020-000

Analyzer module D P&C for IR-DIC 770 nm

Item has been added to the configuration

Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Polarizers D

Item has been added to the configuration

Senarmont polarizer DIC/VIS-IR 770 nm

Recover

Item no.: 427710-9030-000

Senarmont polarizer DIC/VIS-IR 770 nm

Item Number: 427710-9030-000

Senarmont polarizer DIC/VIS-IR 770 nm

Item has been added to the configuration

Senarmont polarizer IR-DIC 770 nm

Recover

Item no.: 427710-9020-000

Senarmont polarizer IR-DIC 770 nm

Item Number: 427710-9020-000

Senarmont polarizer IR-DIC 770 nm

Item has been added to the configuration

Senarmont polarizer DIC

Recover

Item no.: 427710-9010-000

Senarmont polarizer DIC

Item Number: 427710-9010-000

Senarmont polarizer DIC

DIC slider type III

Item has been added to the configuration

DIC slider Achroplan 40x/0.80 W III

Recover

Item no.: 444465-0000-000

DIC slider Achroplan 40x/0.80 W III

Item Number: 444465-0000-000

DIC slider Achroplan 40x/0.80 W III

Item has been added to the configuration

DIC slider W PA 40x/1.0 III

Recover

Item no.: 426967-9010-000

DIC slider W PA 40x/1.0 III

Item Number: 426967-9010-000

DIC slider W PA 40x/1.0 III

Item has been added to the configuration

DIC slider W PA 63x/1.0 III

Recover

Item no.: 426961-0000-000

DIC slider W PA 63x/1.0 III

Item Number: 426961-0000-000

DIC slider W PA 63x/1.0 III

Item has been added to the configuration

DIC slider LCI PN 63x/1.30 III

Recover

Item no.: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item Number: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item has been added to the configuration

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Recover

Item no.: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item Number: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item has been added to the configuration

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Recover

Item no.: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item Number: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item has been added to the configuration

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Recover

Item no.: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Item Number: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Various PO accessories

Item has been added to the configuration

Quartz depolarizer with tube-lens for tubes Axio Imager

Recover

Item no.: 428106-9030-000

Quartz depolarizer with tube-lens for tubes Axio Imager

Item Number: 428106-9030-000

Quartz depolarizer with tube-lens for tubes Axio Imager

Stages and accessories (16)

Mechanical stages

Item has been added to the configuration

Mechanical stage 75x50 L ergon. drive, fixed position

Recover

Item no.: 432035-9140-000

Mechanical stage 75x50 L ergon. drive, fixed position

Item Number: 432035-9140-000

Mechanical stage 75x50 L ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, left drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position

Item has been added to the configuration

Mechanical stage 75x50 R with special surface, high load capacity

Recover

Item no.: 432035-9070-000

Mechanical stage 75x50 R with special surface, high load capacity

Item Number: 432035-9070-000

Mechanical stage 75x50 R with special surface, high load capacity 220 x 170 mm stage plate with bright, special hardcoat anodized surface for particularly severe stress, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting

Item has been added to the configuration

Mechanical stage 75x50 R ergon. drive, fixed position

Recover

Item no.: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position

Item Number: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position

Item has been added to the configuration

Mechanical stage 75x50 R with hardcoat anodized surface

Recover

Item no.: 432035-9000-000

Mechanical stage 75x50 R with hardcoat anodized surface

Item Number: 432035-9000-000

Mechanical stage 75x50 R with hardcoat anodized surface 220 x 170 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting

Specimen holders

Item has been added to the configuration

Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D) - dimension 76 mm x 26 mm - mounting for 4 TEM Grids, d=3.05 mm - 3 calibration reference points Not compatible with EVO STEM-detector.

Item has been added to the configuration

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Recover

Item no.: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Item Number: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D) - dimension 76 mm x 26 mm - mounting for cover glasses 22 mm x 22 mm - 3 calibration reference points - incl. cover glasses high performance, D=0.17mm, 22 x 22 mm, box with 200 pc.

Item has been added to the configuration

Specimen holder basic for one-hand operation, spring lever left

Recover

Item no.: 432333-9000-000

Specimen holder basic for one-hand operation, spring lever left

Item Number: 432333-9000-000

Specimen holder basic for one-hand operation, spring lever left

Item has been added to the configuration

Universal mounting frame for Petri dishes and slides

Recover

Item no.: 432311-9901-000

Universal mounting frame for Petri dishes and slides

Item Number: 432311-9901-000

Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner

Item has been added to the configuration

Specimen holder 76x26, one-hand operation for immersion

Recover

Item no.: 432308-0000-000

Specimen holder 76x26, one-hand operation for immersion

Item Number: 432308-0000-000

Specimen holder 76x26, one-hand operation for immersion (particularly for immersion objectives)

Item has been added to the configuration

Heatable universal mounting frame A-H for mechanical stage 75x50

Recover

Item no.: 432304-0000-000

Heatable universal mounting frame A-H for mechanical stage 75x50

Item Number: 432304-0000-000

Heatable universal mounting frame A-H for mechanical stage 75x50 to accept Petri dishes with a diameter between 30 and 60 mm or 26x76 mm microscope slides

Item has been added to the configuration

Specimen holder, special, for 2 slides 76x26 mm

Recover

Item no.: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm

Item Number: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm particularly for use with immersion objectives

Item has been added to the configuration

Specimen holder for slide 76x26 mm for one-hand operation

Recover

Item no.: 432301-0000-000

Specimen holder for slide 76x26 mm for one-hand operation

Item Number: 432301-0000-000

Specimen holder for slide 76x26 mm for one-hand operation

Various stage accessories

Item has been added to the configuration

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D) compatible to STEM detector and air lock 80 mm

Item has been added to the configuration

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Recover

Item no.: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Item Number: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D) compatible to air lock 80 mm

Coded stages

Item has been added to the configuration

Display unit Profiler SCD (D)

Recover

Item no.: 432035-9111-000

Display unit Profiler SCD (D)

Item Number: 432035-9111-000

Display unit Profiler SCD (D) Touch display for up to three linear coordinates. Resolution: 1µm, Interface: RS232 interface incl. RS232 cable, encoder cable 2 m and power supply 100...240V/47...63Hz 24V / 30W with country specific plug (EU/GB/USA/AUS)

Motorized stages

Item has been added to the configuration

Mechanical stage 75x50 mot standard; CAN (D)

Recover

Item no.: 432026-9000-000

Mechanical stage 75x50 mot standard; CAN (D)

Item Number: 432026-9000-000

Mechanical stage 75x50 mot standard; CAN (D) for Axio Scope, Axio Examiner, Axio Imager and SteREO - with hardcoat anodized surface - stepper motor drive with integrated controller - connection via CAN bus - stage plate 292 x 187 x 18 mm - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.5 µm - reproducibility: +/- 5 µm - absolute accuracy: +/- 30 µm - max sample weight: 1 kg - incl. CAN cable

Tubes and accessories (7)

Binocular phototubes

Item has been added to the configuration

Binocular phototube 30°/23 (50:50), reversed image

Recover

Item no.: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image

Item Number: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image camera port with interface 60N

Item has been added to the configuration

Binocular phototube 15°/25 (100:0/0:100), upright image

Recover

Item no.: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image

Item Number: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image adjustable stop, camera port with interface 60N

Binocular ergotubes

Item has been added to the configuration

Comfortable binocular Ergophototube 15°/23 (50:50)

Recover

Item no.: 425520-9050-000

Comfortable binocular Ergophototube 15°/23 (50:50)

Item Number: 425520-9050-000

Comfortable binocular Ergophototube 15°/23 (50:50) vertically adjustable and extendable, upright image. Variable, continuous horizontal and vertical adjustment of the binocular component (50 mm each), camera port with interface 60N

Item has been added to the configuration

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image

Recover

Item no.: 425520-9040-000

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image

Item Number: 425520-9040-000

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image with prism switch, camera port with interface 60N

Binocular tubes

Item has been added to the configuration

Binocular phototube 20°/23 (100:0/0:100), upright image

Recover

Item no.: 425520-9030-000

Binocular phototube 20°/23 (100:0/0:100), upright image

Item Number: 425520-9030-000

Binocular phototube 20°/23 (100:0/0:100), upright image with sliding prism, camera port with interface 60N

Item has been added to the configuration

Binocular phototube 30°/23 (100:0/0:100), reversed image

Recover

Item no.: 425520-9020-000

Binocular phototube 30°/23 (100:0/0:100), reversed image

Item Number: 425520-9020-000

Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N

Item has been added to the configuration

Binocular tube 30°/23, reversed image

Recover

Item no.: 425520-9000-000

Binocular tube 30°/23, reversed image

Item Number: 425520-9000-000

Binocular tube 30°/23, reversed image

Intermediate tubes (6)

Intermediate tube

Item has been added to the configuration

Adaptation set for tubes Axio Scope.A1 on center comp. multidisc.

Recover

Item no.: 425145-9070-000

Adaptation set for tubes Axio Scope.A1 on center comp. multidisc.

Item Number: 425145-9070-000

Adaptation set for tubes Axio Scope.A1 on center comp. multidisc. Set of compensation plates, to be inserted instead of the tube lens of Axio Scope.A1 tubes/photo tubes for the main observer only, consisting of threaded mount including - glass plate, fixed - glass plate, exchangeable - attenuation filter, loosely supplied. Attenuation filter can be used instead of exchangeable glass plate for brightness compensation between main observer and several co-observers.

Item has been added to the configuration

Tube carrier for 1 Co-observer, light-intensive, end panel, left

Recover

Item no.: 425145-9060-000

Tube carrier for 1 Co-observer, light-intensive, end panel, left

Item Number: 425145-9060-000

Tube carrier for 1 Co-observer, light-intensive, end panel, left

Item has been added to the configuration

Tube carrier multidiscussion for 2 tubes, end panel linear, l/r

Recover

Item no.: 425145-9050-000

Tube carrier multidiscussion for 2 tubes, end panel linear, l/r

Item Number: 425145-9050-000

Tube carrier multidiscussion for 2 tubes, end panel linear, l/r

Item has been added to the configuration

Tube carrier multidiscussion for 1 tube, arm right deflection, connect

Recover

Item no.: 425145-9040-000

Tube carrier multidiscussion for 1 tube, arm right deflection, connect

Item Number: 425145-9040-000

Tube carrier multidiscussion for 1 tube, arm right deflection, connect

Item has been added to the configuration

Tube carrier multidiscussion for 1 tube, arm left deflection, connect

Recover

Item no.: 425145-9030-000

Tube carrier multidiscussion for 1 tube, arm left deflection, connect

Item Number: 425145-9030-000

Tube carrier multidiscussion for 1 tube, arm left deflection, connect

Item has been added to the configuration

Tube carrier multidiscussion for 2 tubes, connect linear left/right

Recover

Item no.: 425145-9020-000

Tube carrier multidiscussion for 2 tubes, connect linear left/right

Item Number: 425145-9020-000

Tube carrier multidiscussion for 2 tubes, connect linear left/right

Filters (77)

Fluorescence filter set pix

Item has been added to the configuration

Filter Set 121 mCherry

Recover

Item no.: 489121-9100-000

Filter Set 121 mCherry

Item Number: 489121-9100-000

Filter Set 121 mCherry Consisting of: EX BP 555/30 BS 583 EM BP 640/86. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 118 YFP

Recover

Item no.: 489118-9100-000

Filter Set 118 YFP

Item Number: 489118-9100-000

Filter Set 118 YFP Consisting of: EX BP 508/20 BS 525 EM BP 555/46. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 117 FRET GFP/mCherry for filter wheels

Recover

Item no.: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels

Item Number: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels for use with excitation and emission filter wheel. Consisting of: EX BP 469/38 (GFP/FRET) EX BP 555/30 (mCherry) BS 495 (GFP) BS 583 (mCherry) EM BP 525/50 (GFP) EM BP 640/86 (mCherry/FRET). Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 115 Cy7

Recover

Item no.: 489115-9100-000

Filter Set 115 Cy7

Item Number: 489115-9100-000

Filter Set 115 Cy7 Consisting of: EX BP 710/87 BS 760 EM BP 814/91. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 114 FRET CFP/YFP for filter wheels

Recover

Item no.: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels

Item Number: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels for use with excitation and emission filter wheel Consisting of: EX BP 423/44 (CFP/FRET) EX BP 508/20 (YFP) BS 463 (CFP/FRET) BS 525 (YFP) EM BP 485/35 (CFP) EM BP 555/46 (FRET)

Item has been added to the configuration

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM MBP 425/30 + 514/30 + 592/25 + 681/45 + 785/38

Item has been added to the configuration

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 555, 630 and 735 nm and emission filter wheel. Consisting of: BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM MBP 425/30 + 524/51 + 634/38 + 785/38

Item has been added to the configuration

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7 for use with ZEISS LED fluorescence light sources and emission filter wheel. Consisting of: BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter Set 110 HE LED (E)

Recover

Item no.: 489110-9111-000

Filter Set 110 HE LED (E)

Item Number: 489110-9111-000

Filter Set 110 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, FITC, mCherry and Cy7 with excitation wavelengths 385, 475, 590 and 735 nm. Contains beam splitter QBS 405 + 493 + 611 + 762 and emission filter QBP 425/30 + 524/51 + 634/38 + 785/38.

Item has been added to the configuration

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter set 109 HE LED (E)

Recover

Item no.: 489109-9110-000

Filter set 109 HE LED (E)

Item Number: 489109-9110-000

Filter set 109 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, FITC and TRITC/Cy3 with excitation wavelengths 385, 475 and 555 nm. Contains beam splitter TBS 405 + 493 + 575 and emission filter TBP 425/29 + 514/31 + 632/100.

Item has been added to the configuration

Filter set 108 HE LED (E)

Recover

Item no.: 489108-9110-000

Filter set 108 HE LED (E)

Item Number: 489108-9110-000

Filter set 108 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like CFP and YFP with excitation wavelengths 425 and 508 nm. Contains beam splitter DBS 450 + 538 and emission filter DBP 467/24 + 598/110.

Item has been added to the configuration

Filter Set 96 HE BFP shift free (E)

Recover

Item no.: 489096-9100-000

Filter Set 96 HE BFP shift free (E)

Item Number: 489096-9100-000

Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 92 MBP DAPI+GFP+AF594

Recover

Item no.: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594

Item Number: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM MBP 425/30 + 524/50 + 688/145

Item has been added to the configuration

Filter Set 92 LED SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594

Item Number: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594 for use withZEISS LED fluorescence light sources and emission filter wheel. Consisting of: BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter set 92 HE LED (E)

Recover

Item no.: 489092-9110-000

Filter set 92 HE LED (E)

Item Number: 489092-9110-000

Filter set 92 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, GFP and mCherry with excitation wavelengths 385, 475 and 590 nm. Contains beam splitter TBS 405 + 493 + 610 and emission filter TBP 425/30 + 524/50 + 688/145.

Item has been added to the configuration

Filter Set 92 SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594

Item Number: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594 for use with exciation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter Set 91 MBP CFP+YFP+AF594

Recover

Item no.: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594

Item Number: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594 for use with excitation filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM MBP 467/24 + 555/25 + 687/145

Item has been added to the configuration

Filter Set 91 LED SBP CFP+YFP+AF594

Recover

Item no.: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594

Item Number: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594 for use with ZEISS LED fluorescence light sources and emission filter wheel. Consisting of: BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter set 91 HE LED (E)

Recover

Item no.: 489091-9110-000

Filter set 91 HE LED (E)

Item Number: 489091-9110-000

Filter set 91 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like CFP, YFP and mCherry with excitation wavelengths 430, 508 and 590 nm. Contains beam splitter TBS 450 + 538 + 610 and emission filter TBP 467/24 + 555/25 + 687/145.

Item has been added to the configuration

Filter Set 91 SBP CFP+YFP+AF594

Recover

Item no.: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594

Item Number: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594 for use with excitation and emission filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM MBP 425/30 + 514/30 + 592/25 + 709/100

Item has been added to the configuration

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5 for use with ZEISS LED fluorescence light sources and emission filter wheel Consisting of: BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter set 90 HE LED (E)

Recover

Item no.: 489090-9110-000

Filter set 90 HE LED (E)

Item Number: 489090-9110-000

Filter set 90 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.

Item has been added to the configuration

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Recover

Item no.: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Item Number: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E) for excitation with multi spectral light sources. Consisting of: EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9010-000

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9010-000

Filter Set 90 SBP DAPI+GFP+DsRed+Cy5 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter set 70 HE Alexa 430 shift free (E)

Recover

Item no.: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E)

Item Number: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E) EX BP 430/60, BS FT 500, EM BP 550/100, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 64 HE mPlum shift free (E)

Recover

Item no.: 489064-0000-000

Filter set 64 HE mPlum shift free (E)

Item Number: 489064-0000-000

Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 63 HE mRFP shift free (E)

Recover

Item no.: 489063-0000-000

Filter set 63 HE mRFP shift free (E)

Item Number: 489063-0000-000

Filter set 63 HE mRFP shift free (E) EX BP 572/25, BS FT 590, EM BP 629/62

Item has been added to the configuration

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Recover

Item no.: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Item Number: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E) optimized for use with the illumination system Colibri EX BP 370/40 o. BP 474/28 o. BP 585/35 BS TFT 395+495+610 EM DBP 425/46+527/54+LP 615

Item has been added to the configuration

Filter Set 56 MBP GFP+DsRed

Recover

Item no.: 489056-9130-000

Filter Set 56 MBP GFP+DsRed

Item Number: 489056-9130-000

Filter Set 56 MBP GFP+DsRed for use with excitation filter wheel Consisting of: EX BP 469/38 EX BP 540-570 BS 490 + 575 EM MBP 513/28 + 630/98

Item has been added to the configuration

Filter Set 56 LED SBP GFP+DsRed

Recover

Item no.: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed

Item Number: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed for use with ZEISS LED fluorescence light sources and emission filter wheel. Consisting of: BS 490 + 575 EM BP 514/30 EM BP 630/98

Item has been added to the configuration

Filter set 56 HE LED (E)

Recover

Item no.: 489056-9110-000

Filter set 56 HE LED (E)

Item Number: 489056-9110-000

Filter set 56 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.

Item has been added to the configuration

Filter Set 56 SBP GFP+DsRed

Recover

Item no.: 489056-9010-000

Filter Set 56 SBP GFP+DsRed

Item Number: 489056-9010-000

Filter Set 56 SBP GFP+DsRed for use with excitation and emission filter wheel Consisting of: EX BP 469/38 EX BP 555/30 BS 490 + 575 EM BP 514/30 EM BP 630/98

Item has been added to the configuration

Filter set 56 HE GFP + DsRed shift free (E)

Recover

Item no.: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E)

Item Number: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E) EX (GFP) BP 470/27, EX (DsRed) BP 556/25, BS DFT 490+575, EM DBP 512/30+630/98

Item has been added to the configuration

Filter set 47 HE CFP shift free (E)

Recover

Item no.: 489047-9901-000

Filter set 47 HE CFP shift free (E)

Item Number: 489047-9901-000

Filter set 47 HE CFP shift free (E) EX BP 436/25, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter set 46 HE YFP shift free (E)

Recover

Item no.: 489046-9901-000

Filter set 46 HE YFP shift free (E)

Item Number: 489046-9901-000

Filter set 46 HE YFP shift free (E) EX BP 500/25, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter set 43 HE Cy 3 shift free (E)

Recover

Item no.: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E)

Item Number: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 38 HE eGFP shift free (E)

Recover

Item no.: 489038-9901-000

Filter set 38 HE eGFP shift free (E)

Item Number: 489038-9901-000

Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 25 HE shift free (E)

Recover

Item no.: 489025-0000-000

Filter set 25 HE shift free (E)

Item Number: 489025-0000-000

Filter set 25 HE shift free (E) EX TBP 405+495+575, BS TFT 435+510+600, EM TBP 460+530+625

Item has been added to the configuration

Filter set 21 HE Fura 2 shift free (E)

Recover

Item no.: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E)

Item Number: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E) EX BP 340/30, EX BP 387/15, BS FT 409, EM BP 510/90, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 20 HE Rhodamin shift free (E)

Recover

Item no.: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E)

Item Number: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E) EX BP 546/12, BS FT 560, EM BP 607/80

Item has been added to the configuration

Filter Set 106 (E)

Recover

Item no.: 488106-9100-000

Filter Set 106 (E)

Item Number: 488106-9100-000

Filter Set 106 (E) EX BP 420/40, BS FT 465, EM LP 470/00 Filter set for fluorometric quantification of rock samples.

Item has been added to the configuration

Filter set 50 Cy 5 shift free (E)

Recover

Item no.: 488050-9901-000

Filter set 50 Cy 5 shift free (E)

Item Number: 488050-9901-000

Filter set 50 Cy 5 shift free (E) EX BP 640/30, BS FT 660, EM BP 690/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 49 DAPI shift free (E)

Recover

Item no.: 488049-9901-000

Filter set 49 DAPI shift free (E)

Item Number: 488049-9901-000

Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50

Item has been added to the configuration

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Recover

Item no.: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Item Number: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F) EX TBP 400+495+570, BS FT 410+505+585, EM TBP 460+530+625

Item has been added to the configuration

Filter set 20 Rhodamin shift free (F)

Recover

Item no.: 488020-9901-000

Filter set 20 Rhodamin shift free (F)

Item Number: 488020-9901-000

Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640

Item has been added to the configuration

Filter set 15 shift free (F)

Recover

Item no.: 488015-0000-000

Filter set 15 shift free (F)

Item Number: 488015-0000-000

Filter set 15 shift free (F) EX BP 546/12, BS FT 580, EM LP 590

Item has been added to the configuration

Filter set 14 shift free (F)

Recover

Item no.: 488014-0000-000

Filter set 14 shift free (F)

Item Number: 488014-0000-000

Filter set 14 shift free (F) EX BP 510-560, BS FT 580, EM LP 590

Item has been added to the configuration

Filter set 10 shift free (F)

Recover

Item no.: 488010-9901-000

Filter set 10 shift free (F)

Item Number: 488010-9901-000

Filter set 10 shift free (F) EX BP 450-490, BS FT 510, EM BP 515-565

Item has been added to the configuration

Filter set 09 shift free (F)

Recover

Item no.: 488009-9901-000

Filter set 09 shift free (F)

Item Number: 488009-9901-000

Filter set 09 shift free (F) EX BP 450-490, BS FT 510, EM LP 515

Item has been added to the configuration

Filter set 02 shift free (F)

Recover

Item no.: 488002-9901-000

Filter set 02 shift free (F)

Item Number: 488002-9901-000

Filter set 02 shift free (F) EX G 365, BS FT 395, EM LP 420

Item has been added to the configuration

Filter set 01 shift free (F)

Recover

Item no.: 488001-9901-000

Filter set 01 shift free (F)

Item Number: 488001-9901-000

Filter set 01 shift free (F) EX BP 365/12, BS FT 395, EM LP 397

Item has been added to the configuration

Filter set 00 shift free (F)

Recover

Item no.: 488000-0000-000

Filter set 00 shift free (F)

Item Number: 488000-0000-000

Filter set 00 shift free (F) EX BP 530-585, BS FT 600, EM LP 615

Item has been added to the configuration

Filter set 48 FRET CFP/YFP shift free (E)

Recover

Item no.: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E)

Item Number: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E) EX BP 436/20, BS FT 455, EM BP 535/30

Item has been added to the configuration

Filter set 47 CFP shift free (E)

Recover

Item no.: 000000-1196-682

Filter set 47 CFP shift free (E)

Item Number: 000000-1196-682

Filter set 47 CFP shift free (E) EX BP 436/20, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter set 46 YFP shift free (E)

Recover

Item no.: 000000-1196-681

Filter set 46 YFP shift free (E)

Item Number: 000000-1196-681

Filter set 46 YFP shift free (E) EX BP 500/20, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter set 45 HQ TexasRed, d=25 shift free (E)

Recover

Item no.: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E)

Item Number: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E) EX BP 560/40, BS FT 585, EM BP 630/75, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 44 FITC special, d=25 shift free (E)

Recover

Item no.: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E)

Item Number: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E) EX BP 475/40, BS FT 500, EM BP 530/50

Item has been added to the configuration

Filter set 43 Cy 3, d=25 shift free (E)

Recover

Item no.: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E)

Item Number: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E) EX BP 545/25, BS FT 570, EM BP 605/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 31 Cy 3.5 shift free (E)

Recover

Item no.: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E)

Item Number: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E) EX BP 565/30, BS FT 585, EM BP 620/60

Item has been added to the configuration

Filter set 38 Endow GFP shift free (E)

Recover

Item no.: 000000-1031-346

Filter set 38 Endow GFP shift free (E)

Item Number: 000000-1031-346

Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Fluorescence filter set

Item has been added to the configuration

Filter set 52 HE (488nm) shift free (E)

Recover

Item no.: 489052-0000-000

Filter set 52 HE (488nm) shift free (E)

Item Number: 489052-0000-000

Filter set 52 HE (488nm) shift free (E) EX BP 488/20, BS FT 505, EM BP 530/50

Neutral density filter

Item has been added to the configuration

Neutral-density filter set D, d=32 mm Axio Examiner

Recover

Item no.: 487935-9000-000

Neutral-density filter set D, d=32 mm Axio Examiner

Item Number: 487935-9000-000

Neutral-density filter set D, d=32 mm Axio Examiner consisting of 5 neutral-density filters with 50%, 25%, 12%, 6% and 1.5% transmission

BP bandpass filter

Item has been added to the configuration

Filter IR BP 750-990 d=36mm x 3mm for IR-Dodt

Recover

Item no.: 447958-9010-000

Filter IR BP 750-990 d=36mm x 3mm for IR-Dodt

Item Number: 447958-9010-000

Filter IR BP 750-990 d=36mm x 3mm for IR-Dodt

Item has been added to the configuration

Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC

Recover

Item no.: 447958-9000-000

Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC

Item Number: 447958-9000-000

Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC

LP longpass filter

Item has been added to the configuration

Beam combiner 600 nm

Recover

Item no.: 446436-0001-000

Beam combiner 600 nm

Item Number: 446436-0001-000

Beam combiner 600 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 395 nm

Recover

Item no.: 446431-0011-000

Beam combiner 395 nm

Item Number: 446431-0011-000

Beam combiner 395 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 535 nm

Recover

Item no.: 423052-0104-000

Beam combiner 535 nm

Item Number: 423052-0104-000

Beam combiner 535 nm for illumination system Colibri

Various filter accessories

Item has been added to the configuration

Holder for Beam Combiner Colibri

Recover

Item no.: 423052-9112-000

Holder for Beam Combiner Colibri

Item Number: 423052-9112-000

Holder for Beam Combiner Colibri changeable by customer

Beam splitter /combiner

Item has been added to the configuration

Beam combiner 660 nm 26x36 mm

Recover

Item no.: 423052-0105-000

Beam combiner 660 nm 26x36 mm

Item Number: 423052-0105-000

Beam combiner 660 nm 26x36 mm Suitable for beam splitting between VIS (fluorescence) and IR (IR-DIC or IR-Dodt) in dual camera adapters and in the zoom photo tube with two camera ports

Item has been added to the configuration

Beam combiner 565 nm

Recover

Item no.: 423052-0103-000

Beam combiner 565 nm

Item Number: 423052-0103-000

Beam combiner 565 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 490 nm

Recover

Item no.: 423052-0102-000

Beam combiner 490 nm

Item Number: 423052-0102-000

Beam combiner 490 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 425 nm

Recover

Item no.: 423052-0101-000

Beam combiner 425 nm

Item Number: 423052-0101-000

Beam combiner 425 nm for illumination system Colibri

Conversion filter

Item has been added to the configuration

White-balance filter, d=32x1.5 mm

Recover

Item no.: 000000-1155-789

White-balance filter, d=32x1.5 mm

Item Number: 000000-1155-789

White-balance filter, d=32x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Photomicrography (1)

T2 adapter

Item has been added to the configuration

T2-adapter for Canon EOS (EF Bayonet)

Recover

Item no.: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item Number: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Video devices (18)

Video adapter 60 C

Item has been added to the configuration

Adapter Video 60 C 1/3" 0.4x

Recover

Item no.: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Item Number: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Other video adapters

Item has been added to the configuration

Double Adapter Duolink 60N - 2x 60N man.

Recover

Item no.: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man.

Item Number: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man. for mounting two cameras and Dual Camera applications. - interface to microscope: 60N - interface to camera: 2x 60N, arranged in parallel - distance of optical axes: 194 mm - mounting orientation: horizontal, vertical - laser safety: via Laser Safety Kit (optional) - manual switching of light path via filter module (1 filter module with 100% mirror included) - slider with calibration sample - slider with bertrand optics for TIRF adjustment - incl. Calibration Slide Universal D=0 - camera exit 2 adjustable in x/y +/- 1.3 mm, z +2/-13 mm relative to image plane of camera exit 1, rotation +/- 3° - max. image field: 22 mm - max. weight load: 5 kg for each camera exit - height-adjustable supports - dimensions: (W x D x H) ca. 280 mm x 310 mm x 170 mm (with supports), 156 mm (without supports) - weight: ca. 6.2 kg

Item has been added to the configuration

Double adapter 60N - 2x 60N with slider mount

Recover

Item no.: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount

Item Number: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount - slider mount for slider with 100% mirror or slider with beam splitter mount - 2 clickstop positions - mount for filters d=25 mm on both exits alternatively required: - slider with 100% mirror or - slider with beam splitter mount and 50:50 beam splitter or other beam splitters with dimensions 26x36 mm

Item has been added to the configuration

Slider with beam splitter mount for double adapter

Recover

Item no.: 426141-9021-000

Slider with beam splitter mount for double adapter

Item Number: 426141-9021-000

Slider with beam splitter mount for double adapter - 2 clickstop positions for exit straight / lateral - mount for beam splitter 26x36 mm

Item has been added to the configuration

Slider with 100% mirror for double adapter

Recover

Item no.: 426141-9011-000

Slider with 100% mirror for double adapter

Item Number: 426141-9011-000

Slider with 100% mirror for double adapter - 2 clickstop positions for exit straight / lateral

Item has been added to the configuration

Universal Digital Camera Adapter d30 M37/52x0.75

Recover

Item no.: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item Number: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter T2-T2 SLR 2.5x

Recover

Item no.: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item Number: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item has been added to the configuration

Camera Adapter T2-T2 DSLR 1.6x

Recover

Item no.: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item Number: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Item has been added to the configuration

Adapter 60N - 44

Recover

Item no.: 426102-0000-000

Adapter 60N - 44

Item Number: 426102-0000-000

Adapter 60N - 44

Item has been added to the configuration

Adapter 60N for microscope camera, d=30mm

Recover

Item no.: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Item Number: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Measuring and counting components (1)

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Eyepieces (14)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444232-9910-000

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Item Number: 444232-9910-000

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br.foc.

Recover

Item no.: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item Number: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with net micrometer

Recover

Item no.: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item Number: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Recover

Item no.: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item Number: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444036-9050-000

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Item Number: 444036-9050-000

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item Number: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc.

Recover

Item no.: 444036-9010-000

Eyepiece PL 10x/22 Br. foc.

Item Number: 444036-9010-000

Eyepiece PL 10x/22 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item Number: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Eyepieces for spectacle wearers, focusing, Pol, 10x

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Recover

Item no.: 444038-9000-000

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Item Number: 444038-9000-000

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Recover

Item no.: 444036-9020-000

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Item Number: 444036-9020-000

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Eyepiece accessories (10)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Crossline graticule, d=26 mm

Recover

Item no.: 474064-0000-000

Crossline graticule, d=26 mm

Item Number: 474064-0000-000

Crossline graticule d=26 mm

Item has been added to the configuration

Format reticle MC 2.5x/ d=26 mm

Recover

Item no.: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item Number: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item has been added to the configuration

Crossline micrometer 14:140, d=26 mm

Recover

Item no.: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Item Number: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Net micrometer 10x10/5:10, d=21 mm

Recover

Item no.: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item Number: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item has been added to the configuration

Micrometer 10:100, d=21 mm

Recover

Item no.: 434011-0000-000

Micrometer 10:100, d=21 mm

Item Number: 434011-0000-000

Micrometer 10:100, d=21 mm

Pointer for eyepieces

Item has been added to the configuration

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Recover

Item no.: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Item Number: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Transmitted-light objectives (19)

Achroplan BrightField

Item has been added to the configuration

Objective W N-Achroplan 63x/0.9 M27

Recover

Item no.: 420987-9900-000

Objective W N-Achroplan 63x/0.9 M27

Item Number: 420987-9900-000

Objective W N-Achroplan 63x/0.9 M27 (FWD=2.4mm)

Item has been added to the configuration

Objective N-Achroplan 63x/0.95 CG=0 M27

Recover

Item no.: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27

Item Number: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27 designed for samples without cover glass (FWD=0.17mm)

Item has been added to the configuration

Objective W N-Achroplan 40x/0.75 M27

Recover

Item no.: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27

Item Number: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27 (FWD=2.1mm)

Item has been added to the configuration

Objective W N-Achroplan 20x/0.5 M27

Recover

Item no.: 420957-9900-000

Objective W N-Achroplan 20x/0.5 M27

Item Number: 420957-9900-000

Objective W N-Achroplan 20x/0.5 M27 (FWD=2.6mm)

Item has been added to the configuration

Objective W N-Achroplan 10x/0.3 M27

Recover

Item no.: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27

Item Number: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27 (FWD=2.6mm)

Plan-Apochromat BrightField

Item has been added to the configuration

Objective W Plan-Apochromat 63x/1.0 M27

Recover

Item no.: 421480-9900-000

Objective W Plan-Apochromat 63x/1.0 M27

Item Number: 421480-9900-000

Objective W Plan-Apochromat 63x/1.0 M27 (FWD=2.1mm), VIS-IR

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.3 M27

Recover

Item no.: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27

Item Number: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27 (FWD=2.0mm)

Plan-Apochromat DIC

Item has been added to the configuration

Objective W Plan-Apochromat 40x/1.0 DIC M27

Recover

Item no.: 421462-9900-000

Objective W Plan-Apochromat 40x/1.0 DIC M27

Item Number: 421462-9900-000

Objective W Plan-Apochromat 40x/1.0 DIC M27 (FWD=2.5mm), VIS-IR

Item has been added to the configuration

Objective W Plan-Apochromat 20x/1.0 DIC M27 70mm

Recover

Item no.: 421452-9900-000

Objective W Plan-Apochromat 20x/1.0 DIC M27 70mm

Item Number: 421452-9900-000

Objective W Plan-Apochromat 20x/1.0 DIC M27 70mm parfocal length 70mm (FWD=1.8mm), (UV) VIS-IR

Plan-Neofluar BrightField

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Recover

Item no.: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Item Number: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27 (FWD=0.20mm), Numerical Aperture adjustable from 0.7 to 1.3, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Recover

Item no.: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Item Number: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Recover

Item no.: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Item Number: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27 (FWD=0.10mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Recover

Item no.: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Item Number: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Recover

Item no.: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Item Number: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27 (FWD=0.12mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 M27

Recover

Item no.: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27

Item Number: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 M27

Recover

Item no.: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27

Item Number: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 M27

Recover

Item no.: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27

Item Number: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 M27

Recover

Item no.: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27

Item Number: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)

Plan-Neofluar DIC

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Recover

Item no.: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Item Number: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Immersion oils (5)

Glycerin immersion

Item has been added to the configuration

Immersion medium Immersol G, oiler 20 ml

Recover

Item no.: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml

Item Number: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml ne = 1.456 (23 °C) ve = 58 Glycerine immersion for fluorescence microscopy

Other immersion oils

Item has been added to the configuration

Immersion medium Immersol Sil 406, Oiler 20 ml

Recover

Item no.: 444971-9000-000

Immersion medium Immersol Sil 406, Oiler 20 ml

Item Number: 444971-9000-000

Immersion medium Immersol Sil 406, Oiler 20 ml Brown glass bottle 20 ml, ne=1.406 (23 °C), halogen free

Immersion oil W

Item has been added to the configuration

Immersion medium Immersol W 2010, oiler 20 ml

Recover

Item no.: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml

Item Number: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml ne=1.3339 (23°C) for water immersion

Immersion oil F

Item has been added to the configuration

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Recover

Item no.: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Item Number: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F, oiler 20 ml - boxed

Recover

Item no.: 433802-9010-000

Immersion oil Immersol 518 F, oiler 20 ml - boxed

Item Number: 433802-9010-000

Immersion oil Immersol 518 F, oiler 20 ml - boxed fluorescence free immersion medium (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Accessories for objectives (6)

Intermediate rings

Item has been added to the configuration

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Recover

Item no.: 424516-9070-000

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Item Number: 424516-9070-000

Intermediate ring DIC H=12mm M27 for Axio Examiner.A1

Item has been added to the configuration

Objective extension ring H= 12.3 mm, M27

Recover

Item no.: 000000-1374-410

Objective extension ring H= 12.3 mm, M27

Item Number: 000000-1374-410

Objective extension ring H= 12.3 mm, M27 for the height compensation when PIFOC is used

Item has been added to the configuration

Objective extension ring DIC H= 12.3 mm, M27

Recover

Item no.: 000000-1374-408

Objective extension ring DIC H= 12.3 mm, M27

Item Number: 000000-1374-408

Objective extension ring DIC H= 12.3 mm, M27 for the height compensation when PIFOC is used, with DIC slot

Item has been added to the configuration

Adapter M 27x0.75 / W 0.8 H "0"

Recover

Item no.: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Item Number: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Cleaning paper

Item has been added to the configuration

Box of lens cleaning paper (300 sheets)

Recover

Item no.: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Item Number: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Cover slips

Item has been added to the configuration

Cover glasses with fiducials 20 pc. (YB)

Recover

Item no.: 432335-9370-000

Cover glasses with fiducials 20 pc. (YB)

Item Number: 432335-9370-000

Cover glasses with fiducials 20 pc. (YB) Special designed cover glasses with reference markers for correlative microscopy including a 6-digit serial number on each cover glass for a clear assignment of the sample carrier. - Cover glasses coated with indium tin oxide (ITO) - substrate: glass (D263M) - format: 22 +/- 0.1 mm x 22 +/- 0.1 mm x 0.170 +/-0.005 mm - Chromium reference markers covered with ITO - Chrom thickness: 50 +/- 10 nm - size tolerance of the small L marker: +/- 0.003 mm - precision of the distance between chromium structure and edge of the cover glass: +/- 0.1 mm - ITO Rsq = 170 +/- 30 Ohm/sq - ITO Tavg >= 87% for 450-780 nm - Cover glasses compatible with ZEISS specimen holder CorrMic LS for cover glasses 22 x 22 mm Packaging unit: 20 pcs

Condensers (16)

Condenser, H, PH, D, DIC

Item has been added to the configuration

Condenser, achromatic-aplanatic 1.2W H DIC 5x

Recover

Item no.: 424226-9020-000

Condenser, achromatic-aplanatic 1.2W H DIC 5x

Item Number: 424226-9020-000

Condenser, achromatic-aplanatic 1.2W H DIC 5x with - fixed front lens - 5-position modulator disk - 3 mounts for DIC prisms - rotary stop for inclined illumination For objectives 20x-100x (10x-100x with enclosed diffusion disk), WD=2.0mm for 0.17 mm chamber bottom thickness and water immersion

Item has been added to the configuration

Condenser, achromatic-aplanatic 0.9 H DIC 5x

Recover

Item no.: 424226-9010-000

Condenser, achromatic-aplanatic 0.9 H DIC 5x

Item Number: 424226-9010-000

Condenser, achromatic-aplanatic 0.9 H DIC 5x with - fixed front lens - 5-position modulator disk - 3 mounts for DIC prisms - rotary stop for inclined illumination For objectives 10x-100x (5x-100x with enclosed diffusion disk), WD=1.2 mm

Item has been added to the configuration

Condenser, LD achromatic 0.8 H DIC 5x

Recover

Item no.: 424226-9000-000

Condenser, LD achromatic 0.8 H DIC 5x

Item Number: 424226-9000-000

Condenser, LD achromatic 0.8 H DIC 5x with - fixed front lens - 5-position modulator disk - rotary stop for inclined illumination - 3 mounts for DIC prisms For objectives 5x-100x (2.5x-100x with enclosed diffusion disk), WD=8.6 mm

DIC prisms type I

Item has been added to the configuration

Condenser module DIC I/0.9 Senarmont

Recover

Item no.: 426724-9060-000

Condenser module DIC I/0.9 Senarmont

Item Number: 426724-9060-000

Condenser module DIC I/0.9 Senarmont

Item has been added to the configuration

Condenser module DIC I/0.8 Senarmont

Recover

Item no.: 426724-9030-000

Condenser module DIC I/0.8 Senarmont

Item Number: 426724-9030-000

Condenser module DIC I/0.8 Senarmont

DIC prisms type II

Item has been added to the configuration

Condenser module DIC II/0,9 Senarmont

Recover

Item no.: 426724-9070-000

Condenser module DIC II/0,9 Senarmont

Item Number: 426724-9070-000

Condenser module DIC II/0,9 Senarmont

Item has been added to the configuration

Condenser module DIC II/0.8 Senarmont

Recover

Item no.: 426724-9040-000

Condenser module DIC II/0.8 Senarmont

Item Number: 426724-9040-000

Condenser module DIC II/0.8 Senarmont

Item has been added to the configuration

Condenser module DIC II/1.2 Senarmont

Recover

Item no.: 426724-9010-000

Condenser module DIC II/1.2 Senarmont

Item Number: 426724-9010-000

Condenser module DIC II/1.2 Senarmont

Condenser, D

Item has been added to the configuration

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Recover

Item no.: 465500-0000-000

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Item Number: 465500-0000-000

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Condenser holder

Item has been added to the configuration

Condenser holder Z for dark-field condenser

Recover

Item no.: 445323-0000-000

Condenser holder Z for dark-field condenser

Item Number: 445323-0000-000

Condenser holder Z for dark-field condenser

DIC prisms type III

Item has been added to the configuration

Condenser module DIC III/0.8 LD Senarmont

Recover

Item no.: 426724-9120-000

Condenser module DIC III/0.8 LD Senarmont

Item Number: 426724-9120-000

Condenser module DIC III/0.8 LD Senarmont

Item has been added to the configuration

Condenser module DIC III/0.9 Senarmont

Recover

Item no.: 426724-9080-000

Condenser module DIC III/0.9 Senarmont

Item Number: 426724-9080-000

Condenser module DIC III/0.9 Senarmont

Item has been added to the configuration

Condenser module DIC III/0.8 Senarmont

Recover

Item no.: 426724-9050-000

Condenser module DIC III/0.8 Senarmont

Item Number: 426724-9050-000

Condenser module DIC III/0.8 Senarmont

Item has been added to the configuration

Condenser module DIC III/1.2 Senarmont

Recover

Item no.: 426724-9020-000

Condenser module DIC III/1.2 Senarmont

Item Number: 426724-9020-000

Condenser module DIC III/1.2 Senarmont

Low-power devices

Item has been added to the configuration

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Recover

Item no.: 424225-9050-000

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Item Number: 424225-9050-000

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Condenser, H

Item has been added to the configuration

Condenser, LD achromatic 0.8 H DIC

Recover

Item no.: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC

Item Number: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC with fixed front lens, 1 mount for DIC condenser module. For objectives 5x-100x, WD=8.6 mm

Connecting cables (3)

Illuminator cables

Item has been added to the configuration

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Remote lamp control cable

Item has been added to the configuration

Trigger cable Viluma 9 with single LED trigger ports

Recover

Item no.: 423006-9050-000

Trigger cable Viluma 9 with single LED trigger ports

Item Number: 423006-9050-000

Trigger cable Viluma 9 with single LED trigger ports To trigger all single LEDs/Filter positions of Viluma 9 and to use it in triggered mode in combination with Signal distribution box (SVB-1). For fast acquisition, system camera also needs to be triggered.

Item has been added to the configuration

Trigger cable for HXP C light source (D)

Recover

Item no.: 000000-0485-260

Trigger cable for HXP C light source (D)

Item Number: 000000-0485-260

Trigger cable for HXP C light source (D) one side D-Sub 9 for connection to HXP C, other side BNC. Incl. BNC coupling for connection to trigger cable set AxioCam, Trigger Board for Fast Acquisition or Colibri.

Control devices (5)

Cables, control unit

Item has been added to the configuration

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Recover

Item no.: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Item Number: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D) 2 m length

Motor control units

Item has been added to the configuration

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Controller for Axio Examiner

Recover

Item no.: 432610-9023-000

Controller for Axio Examiner

Item Number: 432610-9023-000

Controller for Axio Examiner - for use with lower microscope part Axio Examiner mot. - for Axio Examiner.A1/D1/Z1 - 100...127 / 200...240 V AC, autorange 50...60Hz / 320 VA - country-specific power cord supplied

Item has been added to the configuration

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Recover

Item no.: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Item Number: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D) Control unit for Maerzhaeuser XY-Stages with stepper motors. The modular system contents of the following components: - System base with power supply 230V / 110V, autoswitching - RS-232 host computer interface module incl. serial interface cable - two stepper motor controller modules for X- and Y-axes - Joystick for two axes - two motor cable for Maerzhaeuser stages with stepper motors - adapter for Maerzhaeuser stages with fixed motor cable

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Micromanipulation injection (1)

PECON devices

Item has been added to the configuration

Tempcontrol 37 (1 channel)

Recover

Item no.: 000000-1116-057

Tempcontrol 37 (1 channel)

Item Number: 000000-1116-057

Tempcontrol 37 (1 channel)

Image processing (71)

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 mono R2 (D)

Recover

Item no.: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D)

Item Number: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live FrameRates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 # Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 color R2

Recover

Item no.: 426560-9081-000

Microscopy Camera Axiocam 712 color R2

Item Number: 426560-9081-000

Microscopy Camera Axiocam 712 color R2 High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 2048 x 1504 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperaturesfrom 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (furtheraccessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free aircirculation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol (D)

Recover

Item no.: 426560-9070-000

Microscopy Camera Axiocam 705 pol (D)

Item Number: 426560-9070-000

Microscopy Camera Axiocam 705 pol (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel(8 out of 14 bit or compression mode) Dark Current: <0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.3 (blue edition) or higher, ZEN core v3.1 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 mono R2 (D)

Recover

Item no.: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D)

Item Number: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 # Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 color R2 (D)

Recover

Item no.: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D)

Item Number: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. < 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Recover

Item no.: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Item Number: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D) one side angled for use on Axiocam 5xx/7xx

Item has been added to the configuration

Trigger Cable Set Axiocam 5xx/7xx (D)

Recover

Item no.: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx (D)

Item Number: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam IC Rev.2-4 Adapter for Macro stand (D)

Recover

Item no.: 426551-0001-000

AxioCam IC Rev.2-4 Adapter for Macro stand (D)

Item Number: 426551-0001-000

AxioCam IC Rev.2-4 Adapter for Macro stand (D) allows mounting the AxioCam IC Rev.2 - Rev.4 to a macro stand with 1/4" tripod thread incl. mounting screw

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Item has been added to the configuration

FireWire Cable 1394b 9pin-9pin 5 m (D)

Recover

Item no.: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Item Number: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Dutch NL (O)

Recover

Item no.: 410380-0800-000

Language Pack Dutch NL (O)

Item Number: 410380-0800-000

Language Pack Dutch NL (O) - Keyboard with Dutch layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

USB 3.0 Card PCIe EX-11094 (O)

Recover

Item no.: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O)

Item Number: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O) - PCIe x1 USB 3.0 Interface EX-11094 - compatibel with PCIe x1, x4, x8 and x16 slots - Single Chip Controller with 4x USB 3.0 connectors - max. data transfer rate 1 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

Monitor TFT 38" HP Series 7 Pro 738pu (95 cm) (O)

Recover

Item no.: 410350-3801-000

Monitor TFT 38" HP Series 7 Pro 738pu (95 cm) (O)

Item Number: 410350-3801-000

Monitor TFT 38" HP Series 7 Pro 738pu (95 cm) (O) Visible diagonal: 95 cm, 21:9, curved 2300R Maximum resolution: 3840 x 1600 pixel @ 60 Hz Brightness: 400 nits Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input:DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type-C 10Gbps, 1 x USB Type C (upstream), 5 x USB Type-A 10Gbps Power consumption: Maximum 318 W, Typical 62 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 58.1 cm x 89.44 cm x 26.69 cm Weight incl. stand: 12.25 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -10° to +10°, Height adjustable 15 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, GS, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 31,5" HP Series 7 Pro 732pk (80 cm) (O)

Recover

Item no.: 410350-3205-000

Monitor TFT 31,5" HP Series 7 Pro 732pk (80 cm) (O)

Item Number: 410350-3205-000

Monitor TFT 31,5" HP Series 7 Pro 732pk (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 Pixel @ 60 Hz Brightness: 400 nits Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.4, HDMI 2.0, Thunderbolt 4.0 Data connectors: 1 x USB Type-C 5Gbps, 4 x USB Type-A 5Gbps, 1 x Ethernet RJ45 Power consumption: Maximum 205 W, Typical 48 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 60.49 cm x 71.35 cm x 21.7 cm Weight incl.stand: 8.77 kg Ergonomic features: Tilt: -5° to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Recover

Item no.: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Item Number: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 pixel Brightness: 350 cd/m² Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.3, 2 x HDMI 2.2 Data connectors: 1 x USB Type C (upstream), 2 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 163 W, Typical 33 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 57.6 cm x 71.7 cm x 23 cm Weight incl. stand: 11 kg Ergonomic features: Tilt: -5°to +35°, Swivel: 344°, Height adjustable 14.9 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC, TCO Operating voltage: 100-120 V / 220-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O)

Recover

Item no.: 410350-2704-000

Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O)

Item Number: 410350-2704-000

Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 3840 x 2160 pixel @ 60 Hz Brightness: 400 nits Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, USB-C Data connectors: 1 x USB Type-C 10Gbps (upstream), 1 x USB Type-C 10Gbps, 5 x USB Type-A 10Gbps Power consumption: Maximum 215 W, Typical 43 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 54.05 cm x 61.34 cm x 22.52 cm Weightincl. stand: 6.5 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)

Recover

Item no.: 410350-2408-000

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)

Item Number: 410350-2408-000

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Recover

Item no.: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Item Number: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA T1000 8 GB mDP (O)

Recover

Item no.: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O)

Item Number: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Item Number: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O) - Extension of default RAID system - Increase capacity from 6 TB (RAID 1) to 12 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

SSD 2 TB M.2 NVMe, additional (O)

Recover

Item no.: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O)

Item Number: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O) - data storage with high performance for data handling with high bandwidth requirement - maximum count per workstation: 1; 2nd SATA harddisk 8 TB required - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 64 GB module - DDR4 2933 MHz ECC registered DIMM - can be extended to 128 GB (2 x 410303-6400-000), 256 GB (4 x 410303-6400-000) or 384 GB (6 x 410303-6400-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 32 GB modules - can be extended to 64 GB (2 x 410303-3205-000), 128 GB (4 x 410303- 3205-000) or 192 GB (6 x 410303-3205-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Recover

Item no.: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Item Number: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Recover

Item no.: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Item Number: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 Rev. 2

Recover

Item no.: 410201-9914-000

Microscopy Workstation Compact HP Z2 G9 Rev. 2

Item Number: 410201-9914-000

Microscopy Workstation Compact HP Z2 G9 Rev. 2 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 / 192 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM BIOS selectable, default off - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 (O)

Recover

Item no.: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O)

Item Number: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System Configuration 5d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O)

Item Number: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 800, LSM 800 MPLX Upgr., LSM 900, LSM 980, Elyra 7, Celldiscoverer 7, Axioscan 7, Lattice Lightsheet 7 and Widefield Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 4d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O)

Item Number: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for Lightsheet Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 3d for Z6 G4 (O)

Recover

Item no.: 000000-2561-499

System Configuration 3d for Z6 G4 (O)

Item Number: 000000-2561-499

System Configuration 3d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 700, LSM 780, LSM 880 and Elyra Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 1d for Z6 G4 (O)

Recover

Item no.: 000000-2548-757

System Configuration 1d for Z6 G4 (O)

Item Number: 000000-2548-757

System Configuration 1d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Without ZEN Software Installation - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

ystem Configuration 3 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-755

ystem Configuration 3 for HP Z2 G9 (O)

Item Number: 000000-2548-755

System Configuration 3 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 700 Systems - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 2 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O)

Item Number: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 1 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O)

Item Number: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Recover

Item no.: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Item Number: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O) Installation of Windows 10 Enterprise LTSB 2016 x64 Highend incl. Windows 10 license Installation of ZEN software for LSM 900, LSM 980, Elyra 7, Celldiscoverer 7 and Widefieldsystems Only for Microscopy Workstation Premium hp Z6 G4 Rev. 2 (410203-9912-000)

Item has been added to the configuration

USB 3.2 Gen1 Card PCIe EX-11092-2 (O)

Recover

Item no.: 000000-0591-463

USB 3.2 Gen1 Card PCIe EX-11092-2 (O)

Item Number: 000000-0591-463

USB 3.0 Card PCIe EX-11092 (O) - PCIe USB 3.0 Interface card EX-11092-2 with two screwable external connectors - Compatible to Microsoft® Windows Standard Open HCD driver - Compliant with PCI Express Gen2 Specifications - Compatible with PCIe x1 up to x16 slot - max. date transfer rate 1 x 5 Gbit/s - backward compatible to USB 1.1 and 2.0 - incl. Low Profile bracket - no external power supply required Microsoft and Microsoft Surface are trademarks of the Microsoft group

Item has been added to the configuration

Firewire ExpressCard EX-6701 (O)

Recover

Item no.: 000000-0505-420

Firewire ExpressCard EX-6701 (O)

Item Number: 000000-0505-420

Firewire ExpressCard EX-6701 (O) - for Notebook with ExpressCard slot 34/54 mm - 2 x IEEE1394B - Hot Plug and Play - Chip-Set Texas Instruments OHCI - IEEE1394 B/A adapter cable 3m 9pin/6pin

Software for image processing (173)

arivis SMA

Item has been added to the configuration

ZEISS arivis Cloud Institute 1 year license: DL Training

Recover

Item no.: 410154-5011-101

ZEISS arivis Cloud Institute 1 year license: DL Training

Item Number: 410154-5011-101

ZEISS arivis Cloud Institute 1 year license: DL Training The arivis Cloud Institute License is valid for one year, includes 10 arivis Cloud accounts and is restricted to academic customers. The 10 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud Department 1 year license: DL Training

Recover

Item no.: 410154-5010-101

ZEISS arivis Cloud Department 1 year license: DL Training

Item Number: 410154-5010-101

ZEISS arivis Cloud Department 1 year license: DL Training The arivis Cloud Department License is valid for one year, includes 5 arivis Cloud accounts and is restricted to academic customers. The 5 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud Lab 1 year license: DL Training

Recover

Item no.: 410154-5009-101

ZEISS arivis Cloud Lab 1 year license: DL Training

Item Number: 410154-5009-101

ZEISS arivis Cloud Lab 1 year license: DL Training The arivis Cloud Lab License is valid for one year, includes 3 arivis Cloud accounts and is restricted to academic customers. The 3 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud 1 year Industry

Recover

Item no.: 410145-3035-100

ZEISS arivis Cloud 1 year Industry

Item Number: 410145-3035-100

arivis Cloud 1 year Industry The arivis Cloud Industry License is valid for one year, includes 1 arivis Cloud account and is restricted to industry customers. It contains: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

arivis Cloud 1 year Academia

Recover

Item no.: 410145-3034-100

arivis Cloud 1 year Academia

Item Number: 410145-3034-100

arivis Cloud 1 year Academia The arivis Cloud Academia License is valid for one year, includes 2 arivis Cloud accounts and is restricted to academic customers. The 2 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

ZEN modules image recording

Item has been added to the configuration

ZEN desk subscription - Campus

Recover

Item no.: 410140-7004-311

ZEN desk subscription - Campus

Item Number: 410140-7004-311

ZEN desk subscription - Campus Yearly subscription "Campus" for 25 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floatinglicences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-onPCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Lattice Lightsheet Processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Campus

Recover

Item no.: 410140-7004-310

ZEN desk subscription - Campus

Item Number: 410140-7004-310

ZEN desk subscription - Campus Yearly subscription "Campus" for 25 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floatinglicences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-onPCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Institute

Recover

Item no.: 410140-7003-311

ZEN desk subscription - Institute

Item Number: 410140-7003-311

ZEN desk subscription - Institute Yearly subscription "Institue" for 10 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN ToolkitAI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Lattice Lightsheet Processing ZEN Module DynamicsProfiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Institute

Recover

Item no.: 410140-7003-310

ZEN desk subscription - Institute

Item Number: 410140-7003-310

ZEN desk subscription - Institute Yearly subscription "Institue" for 10 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN ToolkitAI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Department

Recover

Item no.: 410140-7002-311

ZEN desk subscription - Department

Item Number: 410140-7002-311

ZEN desk subscription - Department Yearly subscription "Department" for 5 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3Dviewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCSAdd-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Lattice Lightsheet Processing ZEN Module DynamicsProfiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Department

Recover

Item no.: 410140-7002-310

ZEN desk subscription - Department

Item Number: 410140-7002-310

ZEN desk subscription - Department Yearly subscription "Department" for 5 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3Dviewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCSAdd-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Lab

Recover

Item no.: 410140-7001-311

ZEN desk subscription - Lab

Item Number: 410140-7001-311

ZEN desk subscription - Lab Yearly subscription "Lab" for 3 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN ModuleAiryscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Lattice Lightsheet Processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Lab

Recover

Item no.: 410140-7001-310

ZEN desk subscription - Lab

Item Number: 410140-7001-310

ZEN desk subscription - Lab Yearly subscription "Lab" for 3 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN ModuleAiryscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.11 desk

Recover

Item no.: 410138-0104-311

Upgrade ZEN desk to ZEN 3.11 desk

Item Number: 410138-0104-311

Upgrade ZEN desk to ZEN 3.11 desk Upgrade of an existing ZEN desk software to ZEN 3.11 desk. Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.11

Recover

Item no.: 410138-0102-311

Upgrade ZEN to ZEN 3.11

Item Number: 410138-0102-311

Upgrade ZEN to ZEN 3.11 Upgrade of an existing ZEN software to ZEN 3.11 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit

Item has been added to the configuration

ZEN SEM Module Shuttle & Find Hardware License Key

Recover

Item no.: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key

Item Number: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key. Module for acquisition of SEM images and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with SEM - Import of light microscopy images with position data to SEM and XB - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-310

ZEN Toolkit Bio Apps

Item Number: 410136-0175-310

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-380

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-380

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Module Shuttle & Find Software License Key

Recover

Item no.: 410136-0056-120

ZEN Module Shuttle & Find Software License Key

Item Number: 410136-0056-120

ZEN Module Shuttle & Find Software License Key Module for acquisition and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with light microscope - Transfer of images with position data to SEM and XB running Shuttle & Find module under ZEN software - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN 3.9 desk floating license

Recover

Item no.: 410135-2004-390

ZEN 3.9 desk floating license

Item Number: 410135-2004-390

ZEN 3.9 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk floating license

Recover

Item no.: 410135-2004-380

ZEN 3.8 desk floating license

Item Number: 410135-2004-380

ZEN 3.8 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.11 desk floating license

Recover

Item no.: 410135-2004-311

ZEN 3.11 desk floating license

Item Number: 410135-2004-311

ZEN 3.11 desk floating license ZEN image processing under Windows 10 / Windows 11 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.10 desk floating license

Recover

Item no.: 410135-2004-310

ZEN 3.10 desk floating license

Item Number: 410135-2004-310

ZEN 3.10 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9 desk

Recover

Item no.: 410135-0004-390

ZEN 3.9 desk

Item Number: 410135-0004-390

ZEN 3.9 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk

Recover

Item no.: 410135-0004-380

ZEN 3.8 desk

Item Number: 410135-0004-380

ZEN 3.8 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.11 desk

Recover

Item no.: 410135-0004-311

ZEN 3.11 desk

Item Number: 410135-0004-311

ZEN 3.11 desk ZEN image processing under Windows 10 / Windows 11 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.10 desk

Recover

Item no.: 410135-0004-310

ZEN 3.10 desk

Item Number: 410135-0004-310

ZEN 3.10 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9

Recover

Item no.: 410135-0002-390

ZEN 3.9

Item Number: 410135-0002-390

ZEN 3.9 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.8

Recover

Item no.: 410135-0002-380

ZEN 3.8

Item Number: 410135-0002-380

ZEN 3.8 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.11

Recover

Item no.: 410135-0002-311

ZEN 3.11

Item Number: 410135-0002-311

ZEN 3.11 Image acquisition and processing under Windows 10 / Windows 11 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.10

Recover

Item no.: 410135-0002-310

ZEN 3.10

Item Number: 410135-0002-310

ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN Modules image analysis

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.9

Recover

Item no.: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9

Item Number: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.8

Recover

Item no.: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8

Item Number: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.11

Recover

Item no.: 410138-5004-311

Upgrade ZEN band D toolkits to ZEN 3.11

Item Number: 410138-5004-311

Upgrade ZEN band D toolkits to ZEN 3.11 Upgrade of optional ZEN toolkits to ZEN 3.11 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) Upgrade ZEN 3.11 Band A-D item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.10

Recover

Item no.: 410138-5004-310

Upgrade ZEN band D toolkits to ZEN 3.10

Item Number: 410138-5004-310

Upgrade ZEN band D toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.9

Recover

Item no.: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9

Item Number: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.8

Recover

Item no.: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8

Item Number: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.11

Recover

Item no.: 410138-5003-311

Upgrade ZEN band C toolkits to ZEN 3.11

Item Number: 410138-5003-311

Upgrade ZEN band C toolkits to ZEN 3.11 Upgrade of optional ZEN toolkits to ZEN 3.11 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) Upgrade ZEN 3.11 Band A-D item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.10

Recover

Item no.: 410138-5003-310

Upgrade ZEN band C toolkits to ZEN 3.10

Item Number: 410138-5003-310

Upgrade ZEN band C toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.9

Recover

Item no.: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9

Item Number: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.8

Recover

Item no.: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8

Item Number: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.11

Recover

Item no.: 410138-5002-311

Upgrade ZEN band B toolkits to ZEN 3.11

Item Number: 410138-5002-311

Upgrade ZEN band B toolkits to ZEN 3.11 Upgrade of optional ZEN toolkits to ZEN 3.11 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) Upgrade ZEN 3.11 Band A-D item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.10

Recover

Item no.: 410138-5002-310

Upgrade ZEN band B toolkits to ZEN 3.10

Item Number: 410138-5002-310

Upgrade ZEN band B toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.9

Recover

Item no.: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9

Item Number: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.8

Recover

Item no.: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8

Item Number: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.11

Recover

Item no.: 410138-5001-311

Upgrade ZEN band A toolkits to ZEN 3.11

Item Number: 410138-5001-311

Upgrade ZEN band A toolkits to ZEN 3.11 Upgrade of optional ZEN toolkits to ZEN 3.11 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) Upgrade ZEN 3.11 Band A-D item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.10

Recover

Item no.: 410138-5001-310

Upgrade ZEN band A toolkits to ZEN 3.10

Item Number: 410138-5001-310

Upgrade ZEN band A toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Recover

Item no.: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Item Number: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.9 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Recover

Item no.: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Item Number: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic Upgrade of an existing ZEN desk Floating License to ZEN 3.8 desk Floating License Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.11 desk Floating License

Recover

Item no.: 410138-2104-311

Upgrade ZEN desk to ZEN 3.11 desk Floating License

Item Number: 410138-2104-311

Upgrade ZEN desk to ZEN 3.11 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.11 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.10 desk Floating License

Recover

Item no.: 410138-2104-310

Upgrade ZEN desk to ZEN 3.10 desk Floating License

Item Number: 410138-2104-310

Upgrade ZEN desk to ZEN 3.10 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.10 desk. Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Recover

Item no.: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Item Number: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Recover

Item no.: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Item Number: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.11

Recover

Item no.: 410138-0173-311

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.11

Item Number: 410138-0173-311

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.11 Upgrade of an existing ZEN software to ZEN 3.11 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10

Recover

Item no.: 410138-0173-310

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10

Item Number: 410138-0173-310

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Recover

Item no.: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Item Number: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Recover

Item no.: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Item Number: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.11

Recover

Item no.: 410138-0166-311

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.11

Item Number: 410138-0166-311

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.11 Upgrade of an existing ZEN software to ZEN 3.11 including ZEN Advanced Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of theoptional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10

Recover

Item no.: 410138-0166-310

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10

Item Number: 410138-0166-310

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Advanced Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of theoptional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Recover

Item no.: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Item Number: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Recover

Item no.: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Item Number: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.11

Recover

Item no.: 410138-0165-311

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.11

Item Number: 410138-0165-311

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.11 Upgrade of an existing ZEN software to ZEN 3.11 including ZEN Motorized Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (Upgrade ZEN 3.11 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit,Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10

Recover

Item no.: 410138-0165-310

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10

Item Number: 410138-0165-310

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Motorized Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit,Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Recover

Item no.: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Item Number: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.9 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Recover

Item no.: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Item Number: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.8 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or newer does not require this item.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.11

Recover

Item no.: 410138-0124-311

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.11

Item Number: 410138-0124-311

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.11 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.11 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk

Recover

Item no.: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk

Item Number: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk Upgrade of an existing ZEN desk software to ZEN 3.9 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.8 desk

Recover

Item no.: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk

Item Number: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk Upgrade of an existing ZEN desk software to ZEN 3.8 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.10 desk

Recover

Item no.: 410138-0104-310

Upgrade ZEN desk to ZEN 3.10 desk

Item Number: 410138-0104-310

Upgrade ZEN desk to ZEN 3.10 desk Upgrade of an existing ZEN desk software to ZEN 3.10 desk. Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.9

Recover

Item no.: 410138-0102-390

Upgrade ZEN to ZEN 3.9

Item Number: 410138-0102-390

Upgrade ZEN to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.8

Recover

Item no.: 410138-0102-380

Upgrade ZEN to ZEN 3.8

Item Number: 410138-0102-380

Upgrade ZEN to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade of an existing ZEN software to ZEN 3.10

Recover

Item no.: 410138-0102-310

Upgrade of an existing ZEN software to ZEN 3.10

Item Number: 410138-0102-310

Upgrade ZEN to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit

ZEN Basic Software

Item has been added to the configuration

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Recover

Item no.: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Item Number: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN 2.6 pro blue edition. Consisting of: - ZEN 2.6 pro basic license - ZEN module Experiment Designer

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.7

Recover

Item no.: 410138-0902-370

Platform change AV 4.x to ZEN 3.7

Item Number: 410138-0902-370

Platform change AV 4.x to ZEN 3.7 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.7 Consisting of: - ZEN 3.7 basic license - entitles to purchase ZEN Packages/Toolkits with a discount

Item has been added to the configuration

Upgrade ZEN 3.4 to ZEN 3.7

Recover

Item no.: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7

Item Number: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7 Upgrade of an existing ZEN 3.4 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.4 installation

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.7 desk

Recover

Item no.: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk

Item Number: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk Upgrade of an existing ZEN desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Modules as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.5 to ZEN 3.7

Recover

Item no.: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7

Item Number: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7 Upgrade of an existing ZEN 3.5 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.5 installation

Item has been added to the configuration

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Recover

Item no.: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Item Number: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk Upgrade of an existing ZEN 3.6 desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Functions as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.6 to ZEN 3.7

Recover

Item no.: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7

Item Number: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7 Upgrade of an existing ZEN 3.6 software to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.6 installation

Item has been added to the configuration

ZEN Toolkit Molecular Quantification for ZEN desk

Recover

Item no.: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk

Item Number: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution for ZEN desk

Recover

Item no.: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk

Item Number: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques.

Item has been added to the configuration

ZEN Toolkit 3D for ZEN desk

Recover

Item no.: 410137-0172-370

ZEN Toolkit 3D for ZEN desk

Item Number: 410137-0172-370

ZEN Toolkit 3D for ZEN desk This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifyingautomatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Developer for ZEN desk

Recover

Item no.: 410137-0171-370

ZEN Toolkit Developer for ZEN desk

Item Number: 410137-0171-370

ZEN Toolkit Developer for ZEN desk Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can futher extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core).

Item has been added to the configuration

ZEN Toolkit Connect for ZEN desk

Recover

Item no.: 410137-0170-370

ZEN Toolkit Connect for ZEN desk

Item Number: 410137-0170-370

ZEN Toolkit Connect for ZEN desk This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (required 3Dxl) - ManualAlignment oftwo3D stacks (required 3Dxl)** - Import FIB stacks (*not ZEN lite & ZEN starter; motorized stage required) (**not available in ZENCore)

Item has been added to the configuration

ZEN Toolkit AI for ZEN desk

Recover

Item no.: 410137-0169-370

ZEN Toolkit AI for ZEN desk

Item Number: 410137-0169-370

ZEN Toolkit AI for ZEN desk The Intellesis AI Package allows to train, import and execute different machine- and deep-learning models inside ZEN and ZEN core. It contains three major AI core functionalities: - Machine- and Deep-Learning for segmenting images (training of Deep- Learning models on APEER or externally) - Machine-Learning for Object Classification in analyzed images (requires analyzed image data) - Deep-Learning based Denoising using Noise2Void (no need for labels) For every workflowexists as dedicated tool to label images or objects and train the respective model. The package supports any image data format that can be imported into ZEN and ZEN core incl. data imported via the 3rd party import from other vendors and can process multidimensional datasets including z-stacks, multi-channel and tile images. - Additionally the labeling and training of Deep Neural networks can be purchased as as part of a special customize solution (SCS). -The complete ZEN platform is "AI ready", i.e.trained models can be used in all image analysis tools in ZEN and ZEN core (e.g. Image Analysis, Bio Apps, Guided Acquisition, Technical Cleanliness Analysis, Metallography package,...) for segmentation. To run trained models within these modules, the ZEN Intellesis AI package is not required. - Important: Recommended hardware configuration is 8GB GPU and 64GB RAM. Only Nvidia GPUs and the CPU are supported.

Item has been added to the configuration

ZEN Toolkit 2D for ZEN desk

Recover

Item no.: 410137-0168-370

ZEN Toolkit 2D for ZEN desk

Item Number: 410137-0168-370

ZEN Toolkit 2D for ZEN desk Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizardprovides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally toclassical segmentationmethods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. Afterrunning the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belongingto the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups.

Item has been added to the configuration

ZEN Module LSM plus for ZEN desk

Recover

Item no.: 410137-0136-370

ZEN Module LSM plus for ZEN desk

Item Number: 410137-0136-370

ZEN Module LSM plus for ZEN desk Module for resolution enhancement of confocal channels

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-370

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-370

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-360

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-360

ZEN Toolkit Bio Apps Floating License Image analysis for standard life science applications. The package contains a collection of Bio Apps that allow users to analyze images from standard life science applications in a simple and user-friendly way.The package includes Bio Appsfor cell counting, confluence measurement, gene- and protein expression, and automated spot detection, and is particularly suitable for analyzing experiments on multiwell plates. All Bio Apps are "AI-ready" and allow the use ofmachine learning models forimage segmentation. The analysis results are presented in interactive measurement tables and various plots. - Simple setup tailored to the specific application - Selection between fast classical segmentation or machine learning (AI) - Predefined parameters enhance ease-of-use - Dedicated and interactive result display (table, heatmap, timeseries, xy-scatterplot, histogram) - Simple export of results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: The use of AI segmentation requires an installation of ZeissPython. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Deconvolution Floating License

Recover

Item no.: 410136-2173-360

ZEN Toolkit Deconvolution Floating License

Item Number: 410136-2173-360

ZEN Toolkit Deconvolution Floating License Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN 3.7 desk

Recover

Item no.: 410135-0004-370

ZEN 3.7 desk

Item Number: 410135-0004-370

ZEN 3.7 desk ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.7

Recover

Item no.: 410135-0002-370

ZEN 3.7

Item Number: 410135-0002-370

ZEN 3.7 Image acquisition and processing under Windows 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Connect basic - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN modules image processing

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.9

Recover

Item no.: 410138-0902-390

Platform change AV 4.x to ZEN 3.9

Item Number: 410138-0902-390

Platform change AV 4.x to ZEN 3.9 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.9 Consisting of: - ZEN 3.9 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.8

Recover

Item no.: 410138-0902-380

Platform change AV 4.x to ZEN 3.8

Item Number: 410138-0902-380

Platform change AV 4.x to ZEN 3.8 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.8 Consisting of: - ZEN 3.8 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.11

Recover

Item no.: 410138-0902-311

Platform change AV 4.x to ZEN 3.11

Item Number: 410138-0902-311

Platform change AV 4.x to ZEN 3.11 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.11 Consisting of: - ZEN 3.11 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.10

Recover

Item no.: 410138-0902-310

Platform change AV 4.x to ZEN 3.10

Item Number: 410138-0902-310

Platform change AV 4.x to ZEN 3.10 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.10 Consisting of: - ZEN 3.10 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

SW Platform Change desk for Lattice SIM

Recover

Item no.: 410137-9133-310

SW Platform Change desk for Lattice SIM

Item Number: 410137-9133-310

SW Platform Change desk for Lattice SIM required for ELYRA 7 S, ELYRA 7 LS & ELYRA 7 eLS

Item has been added to the configuration

SW Platform Change desk for SMLM

Recover

Item no.: 410137-9041-310

SW Platform Change desk for SMLM

Item Number: 410137-9041-310

SW Platform Change desk for SMLM required for ELYRA 7 L, ELYRA 7 LS

Item has been added to the configuration

SW Platform Change for Lattice SIM

Recover

Item no.: 410136-9133-310

SW Platform Change for Lattice SIM

Item Number: 410136-9133-310

SW Platform Change for Lattice SIM required for ELYRA 7 S, ELYRA 7 LS & ELYRA 7 eLS

Item has been added to the configuration

SW Platform Change for SMLM

Recover

Item no.: 410136-9041-310

SW Platform Change for SMLM

Item Number: 410136-9041-310

SW Platform Change for SMLM required for ELYRA 7 L, ELYRA 7 LS

Item has been added to the configuration

ZEN Module Lattice Lightsheet Processing

Recover

Item no.: 410136-1125-320

ZEN Module Lattice Lightsheet Processing

Item Number: 410136-1125-320

ZEN Module Lattice Lightsheet Processing ZEN Module to process Lattice Lightsheet data. Contains ZEN Module Remote Processing

Item has been added to the configuration

ZEN Module 3D VisArt Hardware License Key

Recover

Item no.: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key

Item Number: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key Module for visualisation of 3D image stacks as volume models, time series (4D)/movies, various rendering methods, maximum intensity projections. Tools for interactive 3D measurements.

Item has been added to the configuration

ZEN Module Deconvolution Hardware License Key

Recover

Item no.: 410136-1021-110

ZEN Module Deconvolution Hardware License Key

Item Number: 410136-1021-110

ZEN Module Deconvolution Hardware License Key Module for improvement of 3D image stacks with 3D deconvolution algorithms, methods for theoretical PSF.

ZEN image processing modules

Item has been added to the configuration

ZEN desk Module Apotome Plus

Recover

Item no.: 410137-0183-311

ZEN desk Module Apotome Plus

Item Number: 410137-0183-311

ZEN desk Module Apotome Plus Enable Apotome to achieve sub-diffraction resolution and improved image contrast with the mathematically exact Apotome Plus function. The underlying joint deconvolution algorithms deliver quantitative results for accurately revealing previously unknown structures. You have the choice between preset parameters and free parameter selection in expert mode. Apotome Plus uses GPU resources for reducing processing times to a minimum.

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-380

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-380

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Module Apotome Plus floating license

Recover

Item no.: 410136-2183-311

ZEN Module Apotome Plus floating license

Item Number: 410136-2183-311

ZEN Module Apotome Plus floating license Enable Apotome to achieve sub-diffraction resolution and improved image contrast with the mathematically exact Apotome Plus function. The underlying joint deconvolution algorithms deliver quantitative results foraccurately revealing previously unknown structures. You have the choice between preset parameters and free parameter selection in expert mode. Apotome Plus uses GPU resources for reducing processing times to a minimum.

Item has been added to the configuration

ZEN Modul Lattice Lightsheet Processing Floating License

Recover

Item no.: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License

Item Number: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License Lattice Lightsheet specific image processing functions for data collected with this instrument. Includes the processing functions Deskew and Subset. Both can be used singly or in combination. Furthermore, there is the possibility to start a deconvolution (singly or in combination with the other two Processing functions) if the deconvolution toolkit required for deconvolution is installed. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox Floating License

Recover

Item no.: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License

Item Number: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Apotome Plus

Recover

Item no.: 410136-0183-311

ZEN Module Apotome Plus

Item Number: 410136-0183-311

ZEN Module Apotome Plus Enable Apotome to deliver sub-diffraction resolution and improved image contrast with the mathematically exact Apotome Plus function. The underlying joint deconvolution algorithms deliver quantitative results for accurately revealing previously indiscernable structures. You have the choice between preset parameters and free parameter selection in expert mode. Apotome Plus uses GPU resources for reducing processing times to a minimum.

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-370

ZEN Toolkit Bio Apps

Item Number: 410136-0175-370

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps one, that fits your application and simply adapt the preconfigured Bio App to your data if necessary. Use fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models in the Bio Apps without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a DNN trained on apeer for semantic or instance segmentation in the BioApp. After analysis, the segmented images are displayed along with customized results tables and diagrams (e.g., heatmaps and scatterplots) so you can get a quick overview of your sample. At the same time, tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with Bio Apps tailored to specific applications - Available Bio Apps: Cell counting, confluency, gene- and protein expression and automated spot detection - Easy operation with predefined parameters - Choose between fast classical segmentation or more powerful AI-models: use AI models trained with the ZEN Toolkit AI or DNNs trained on apeer with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of Z Zeiss Python. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification

Recover

Item no.: 410136-0174-370

ZEN Toolkit Molecular Quantification

Item Number: 410136-0174-370

ZEN Toolkit Molecular Quantification Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color-coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either a tall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution

Recover

Item no.: 410136-0173-370

ZEN Toolkit Deconvolution

Item Number: 410136-0173-370

ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox

Recover

Item no.: 410136-0126-370

ZEN Module EM Image Processing Toolbox

Item Number: 410136-0126-370

ZEN Module EM Image Processing Toolbox Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. If the PC system is equipped with a NVIDIA GPU it is possible to use the GPU-version for the "Remove Stripes" image processing function and speedup the processing time. It is recommended to use at least a workstation with a NVIDIA GPU with at least 4 GB of memory (and install latest Nvidia drivers).

Item has been added to the configuration

ZEN Module Correlative Array Tomography (CAT)

Recover

Item no.: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT)

Item Number: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT) Module for automated image acquisition of ultrathin sections in widefield microscopes. The software module includes image acquisition, the Z-stack alignment and the correlation of the Z-stacks. - Wizard-based workflow solution - Precise correlative calibration in widefield microscopes - Hierarchical image acquisition using the full range of magnification - Definition and imaging of regions of interest and even imaging of complete sections - Automated large area imaging - 3D reconstruction of 3D datasets (Z-stacks) - Registration of correlative 3D datasets - Using the full potential of the ZEN imaging software on the light microscope - Can be used as a non-correlative array tomography module

Item has been added to the configuration

ZEN Module Confocal Topography

Recover

Item no.: 410136-0038-370

ZEN Module Confocal Topography

Item Number: 410136-0038-370

ZEN Module Confocal Topography Module for analysis of surface data and visualisation of measument results.

ZEN Module Image Analysis

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Advanced

Recover

Item no.: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced

Item Number: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced ZEN Module Dynamics Profiler Advanced for ZEN desk with additional flow- and diffusion analysis functionality. The ZEN desk Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN desk Module Lattice SIM

Recover

Item no.: 410137-0133-390

ZEN desk Module Lattice SIM

Item Number: 410137-0133-390

ZEN desk Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods.

Item has been added to the configuration

ZEN desk Module SMLM

Recover

Item no.: 410137-0041-390

ZEN desk Module SMLM

Item Number: 410137-0041-390

ZEN desk Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-310

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-310

ZEN Toolkit Bio Apps Floating License Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio Aps tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not for Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported. The floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification Floating License

Recover

Item no.: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License

Item Number: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, withRatiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery/ decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data whichhave been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulationisexecuted either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching). Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module LSM plus Floating License

Recover

Item no.: 410136-2136-370

ZEN Module LSM plus Floating License

Item Number: 410136-2136-370

ZEN Module LSM plus Floating License Module for resolution enhancement of confocal channels Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Lattice SIM floating license

Recover

Item no.: 410136-2133-390

ZEN Module Lattice SIM floating license

Item Number: 410136-2133-390

ZEN Module Lattice SIM floating license ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module SMLM floating license

Recover

Item no.: 410136-2041-390

ZEN Module SMLM floating license

Item Number: 410136-2041-390

ZEN Module SMLM floating license The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Confocal Topography Floating Licenses

Recover

Item no.: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses

Item Number: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses Module for analysis of surface data and visualisation of measument results. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Recover

Item no.: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Item Number: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License The module enables global fitting for all data sets loaded and contains extended parameter sets for Fit models as well as the ability to create own Fit Models. Floating License allows theflexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Spectral RICS

Recover

Item no.: 410136-0182-390

ZEN Module Spectral RICS

Item Number: 410136-0182-390

ZEN Module Spectral RICS Single-molecule analysis based on raster image correlation spectroscopy. The calculation of CPM (Counts per Molecule) values allows the optimization of the hardware settings for the experiment. The calibration step with known dye solutions defines the confocal volume for quantitative data. Images of several different fluorescently labeled molecules can be clearly separated into image channels using single spectra. The typical crosstalk of the signals into other channels is thus resolved, which enables the calculation of correlations of different molecules to each other (cross-correlation). For analysis, regions in the image can be defined and threshold values can be set. Analysis masks can be created based on image regionsof the same image or a different image. The analysis uses a model of the three-dimensional diffusion of a single molecule. There are three different representations of the analysis to choose from: threshold-based standard analysis, Grid-based heatmap and Intensity-based heat map. In addition to the diffusion velocities, various other result parameters are summarized in a table.

Item has been added to the configuration

ZEN Module SMLM

Recover

Item no.: 410136-0041-390

ZEN Module SMLM

Item Number: 410136-0041-390

ZEN Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Special acquisition modalities allow 3- dimensional acquisition via a phase ramp, as well as iterative sequential excitation of two differently labeled molecules.

ZEN modules image acquisition

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Basic

Recover

Item no.: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic

Item Number: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic for ZEN desk with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced Floating License

Recover

Item no.: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License

Item Number: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License ZEN Module Dynamics Profiler Advanced Floating License with additional flow- and diffusion analysis functionality. The Module Dynamics Profiler Basic Floating License is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-2178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-2178-380

ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic Floating License with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Airyscan Joint Deconvolution Floating License

Recover

Item no.: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License

Item Number: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License ZEN Module Airyscan Joint Deconvolution, additional deconvolution for Airyscan SR data (4 or 32 phase format). Intelligent algorithm based on Joint Iterative methods. Selectable iteration numberfor maximum results and ease of use. Provides superresolution results down to 90nm lateral resolution with suiting samples on LSM systems with Airyscan detection module.

Item has been added to the configuration

ZEN Module Counting and basic FCS Floating License

Recover

Item no.: 410136-2079-370

ZEN Module Counting and basic FCS Floating License

Item Number: 410136-2079-370

ZEN Module Counting and basic FCS Floating License Enables image acquisition in counting mode for GaAsP detectors: 2+4ch Quasar and 2+32ch Quasar (both need additional HW), 2+1ch Quasar, cooled MA-PMT and BiG.2. The Modulea also enables the acquisition of fluorescence correlation spectroscopy data (FCS) with one channel (autocorrelation) providing one Fit Model. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan floating license

Recover

Item no.: 410136-2064-380

ZEN Module Airyscan floating license

Item Number: 410136-2064-380

ZEN Module Airyscan floating license Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format. Floating license allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan Floating License

Recover

Item no.: 410136-2064-370

ZEN Module Airyscan Floating License

Item Number: 410136-2064-370

ZEN Module Airyscan Floating License Module for processing of image data acquired with Airyscan. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module FCS FCCS Add-on PCH Floating License

Recover

Item no.: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License

Item Number: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License Provides the entry function to calculate Number and Brightness of molecule populations. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Counting Add-on FCS and FCCS Floating License

Recover

Item no.: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License

Item Number: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License Enables Fluorescence Correlation and Cross-Correalation Spectroscopy using any counting capable GaAsP-PMT and MA-PMT detectors. The software includes single molecule analyses, an extended range ofFit Models and the acquisition of spectral FCS / FCCS data. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced

Recover

Item no.: 410136-0179-380

ZEN Module Dynamics Profiler Advanced

Item Number: 410136-0179-380

ZEN Module Dynamics Profiler Advanced Dynamics Profiler Advanced enables to collect unique molecular characteristics of fluorescently labelled proteins or other molecules. Using the individual detector elements of the Airyscan detector, specific fluorescence correlation spectroscopy (FCS) techniques provide additional area-based information. In addition to classic FCS parameters (see SW ZEN Module Dynamics Profiler Basic) every measurement includes the opportunity to analyze a) Dynamics with pair correlation to investigate e.g., diffusion barriers and b) active flow providing speed in µm/s and its direction. The Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-0178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-0178-380

ZEN Module Dynamics Profiler Basic Dynamics Profiler allows to gather details of the molecular characteristics of living samples – providing concentration and dynamics information of fluorescently labelled molecules. Expanding the capability of the Airyscan detector and utilizing the area information gathered from 32 circular arranged detection elements for fluorescence correlation spectroscopy (FCS). Data acquisition is guided by a wizard which serves both simplicity and usability. Using the context of a reference image up to 10 measurement spots can be obtained consecutively and analyzed by various fit models. Additionally, the Raw data of all Airyscan detection elements can be exported and used for individual analysis.

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in thecamera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-380

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-380

ZZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-311

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-311

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-310

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-310

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-390

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-390

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-380

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-380

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drivebacklash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-370

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-370

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment. - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility. - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field. -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image.

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-311

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-311

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980). Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field - Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions: - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determinationof the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-310

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-310

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980). Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field - Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-390

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-390

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-311

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-311

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. Z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definitionof an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-310

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-310

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Base Acquisition

Recover

Item no.: 410136-0164-360

ZEN Toolkit Base Acquisition

Item Number: 410136-0164-360

ZEN Toolkit Base Acquisition Acquire images including Time lapse, multi-channel fluorescence <(>&<)> brightfield. This package allows to acquire fluorescence and transmitted light images as well as contrast methods in independent channels. Furthermore, it provides functionality to acquire a time-lapse image of dynamic samples. For multi-channel acquisitions the following features are available: - Acquisition of multiple independent channels for reflected light and transmitted light techniques - Dyes (including wavelength information) can be selected from a database containing more than 500 dyes or fluorescent proteins, and for all common transmitted light contrast techniques supported by the acquisition system (e.g. brightfield, phase contrast, DIC, darkfield, etc.) - Smart setup generation of the required microscope setting for a channel that is added - Possibility of adjusting light intensity and camera settings manually for each channel - Display of channels in a pseudo color image with overlay option or as a monochrome single channel display - Possibility to generate shading corrections for each channel - A focus reference channel can be defined For time-lapse acquisition following functionality exists: - Definition of time series by selection of intervals, total duration or number of cycles. - Control via time, trigger* or manually *only ZEN

Item has been added to the configuration

ZEN Module Lattice SIM

Recover

Item no.: 410136-0133-390

ZEN Module Lattice SIM

Item Number: 410136-0133-390

ZEN Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods

Item has been added to the configuration

ZEN Modul FLIM Applikation

Recover

Item no.: 410136-0111-380

ZEN Modul FLIM Applikation

Item Number: 410136-0111-380

ZEN module FLIM Application • For seamless acquisition of multidimensional FLIM experiments (time series, z-stacks) in ZEN blue • Works only in combination with the FLIM Upgrade Kit from PicoQuant • Definition of experiment duration, file name and structure for reproducible data • FLIM laser power control • Display and transfer of all relevant META data (e.g., objective, pixel time, z position, time point) to the PicoQuant software • Straightforward FLIM data analysis in the SymPhoTime software from PicoQuant

Item has been added to the configuration

ZEN Module Airyscan

Recover

Item no.: 410136-0064-380

ZEN Module Airyscan

Item Number: 410136-0064-380

ZEN Module Airyscan Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Module HDR Confocal Basic Hardware License Key

Recover

Item no.: 410136-0007-370

ZEN Module HDR Confocal Basic Hardware License Key

Item Number: 410136-0007-370

ZEN Module ROI-HDR ROI High Dynamic Range Imaging. Acquisition and display of HDR image data with extended dynamic range, incl. illumination blanking.

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI 1 year license

Recover

Item no.: 410136-3169-380

ZEN Toolkit AI 1 year license

Item Number: 410136-3169-380

ZEN Toolkit AI 1 year license Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. License validity period: 1 year from date of activation

Item has been added to the configuration

ZEN Toolkit AI

Recover

Item no.: 410136-0169-380

ZEN Toolkit AI

Item Number: 410136-0169-380

ZEN Toolkit AI Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services.

Item has been added to the configuration

ZEN Module Coded Microscope

Recover

Item no.: 410136-0155-311

ZEN Module Coded Microscope

Item Number: 410136-0155-311

ZEN Module Coded Microscope Module for reading out coded microscope components. The module enables the display of coded components such as objectives and reflector cubes. Moreover the position of a coded stage can be read out and displayed. Only available for ZEN starter and ZEN lite.

ZEN drivers

Item has been added to the configuration

ZEN Toolkit Peripheral Device Drivers

Recover

Item no.: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers

Item Number: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers Contains drivers for the following devices: Software Driver Uniblitz Driver for control of Uniblitz controllers VCM-D1, VMM-D1. Control of the Uniblitz shutter ("open"/ "closed"). Software Driver Ludl XY Stage Control Driver for the X-, Y-axis of the Ludl XY stage controller. The following types are supported: MAC 5000 XY, MAC 6000 XY. Software Driver Ludl Filterwheel/Shutter Driver for positioning of filters and control of the shutters. Up to 4 filter wheels and 6 shutters simultaneously. Supported controllers: MAC 5000, MAC 6000. Software Driver Sutter DG-4/Filter/Shutter Driver for positioning of the filter wheel and controlling of the shutter via software directly. Supports the Sutter controller Lambda10- 3, Lambda 10-2 and the light sources DG-4 and DG-4 Plus. SW Driver ASI Stage DC with attachment Z Piezo Driver for control of scanning stage XY DC 100x100 with attachment Z Piezo and scanning stage XY DC 110x90 with attachment Z Piezo / Rot.En. Software Driver PIFOC / Prior Driver for control of piezo objective focus unit and stage attachment Z- PIEZO.

Item has been added to the configuration

ZEN SW Driver Linkam Cryo Stage

Recover

Item no.: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage

Item Number: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage - Control of motorized x-, y-axis of CMS196M - Readout and storage of the temperature values in the image - Asynchronous temperature log

Item has been added to the configuration

ZEN Software Driver PCO

Recover

Item no.: 410136-0060-370

ZEN Software Driver PCO

Item Number: 410136-0060-370

ZEN Software Driver PCO Driver for the use of pco.edge cameras edge 5.5 CL, edge 4.2 CL/USB3.0, edge CLHS, edge 4.2 bi

Item has been added to the configuration

ZEN Software Driver Hitachi Camera

Recover

Item no.: 410136-0057-370

ZEN Software Driver Hitachi Camera

Item Number: 410136-0057-370

ZEN Software Driver Hitachi Camera Driver for the operation of the Hitachi camera HV-F202SCL

Item has been added to the configuration

ZEN Software Driver Roper PVCAM

Recover

Item no.: 410136-0046-370

ZEN Software Driver Roper PVCAM

Item Number: 410136-0046-370

ZEN Software Driver Roper PVCAM Driver for the use of Roper/Photometrics/QImaging b/w cameras Evolve 512, Evolve 512 Delta, Prime 95B, Prime BSI, Prime B 22mm

Item has been added to the configuration

ZEN Software Driver Hamamatsu Cameras

Recover

Item no.: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras

Item Number: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras Driver for the use of Hamamatsu b/w cameras Orca Flash 4.0 V3 CL/USB3.0, Orca Flash LT USB3.0, Image EM X2 512, Image EM X2-1K, Orca Fusion

Item has been added to the configuration

ZEN desk (network license)

Recover

Item no.: 410135-2004-370

ZEN desk (network license)

Item Number: 410135-2004-370

ZEN desk (network license) ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

Virtual Slide Box

Recover

Item no.: 410135-0047-370

Virtual Slide Box

Item Number: 410135-0047-370

Virtual Slide Box E-learning package for virtual slides in Education. Packages offers digitalization for 20 slides and a solution for storage and sharing of virtual slides. Virtual slides can be accessed by students remotely with free of charge ZEISS Explorer app. Package includes the following services and software packages: - ZEN Data Storage as storage solution for the digitized slides - ZEN Data Explorer for remote access to stored slides via browser or iOS/Android app - Free of charge scanning service of 20 slides (with cover glass, brightfield only). Please use the ZMCC Demo Request Form in preparation of the scanning of the slides. The price includes installation and setup of the ZEN Data Storage server via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required),32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone® 6s or newer; Ipad® 5 or newer (Mini versions not supported); iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome88.0.4324.104 (64-bit) Windows: Browser: Google Chrome 78.0.3904.108 Apple® iPad Pro® iPhone® are registered trademarks of Apple Inc.

ZEN Module Data Management

Item has been added to the configuration

ZEN Module Sample Navigator

Recover

Item no.: 410136-0107-370

ZEN Module Sample Navigator

Item Number: 410136-0107-370

ZEN Module Sample Navigator Module for simple overview scan with autofocus function on LSM, with Axiocam or transmitted light fluorescence with T-PMT.

Item has been added to the configuration

Software Module LM-EM Correlative Microscopy

Recover

Item no.: 410136-0078-370

Software Module LM-EM Correlative Microscopy

Item Number: 410136-0078-370

Software Module LM-EM Correlative Microscopy Materials Module for image recording, navigation and correlation on light, digital and electron microscopes. - Software module for ZEN core and Smartzoom 5 software - Semi-automatic calibration of ZEISS Correlative Microscopy specimen holder - Manual calibration of custom holders and specimens with any type of fiducials - Definition of regions and points of interest (ROI/POI) - ZEN core only: Easy recovery of previously marked sample ROIs and POIs - ZEN core only: Alignment and overlay of light, digital and electron microscope images and creation of new overlay images - ZEN core only: Automated alignment of images using algorithms for key point detection

arivis Vision4D software for image processing

Item has been added to the configuration

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Recover

Item no.: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Item Number: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN Desk 3.8 and arivis pro TL package (D)

Recover

Item no.: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package (D)

Item Number: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package Combined package of a ZEN desk base software and a two-year temporary license of arivis pro for 3D image visualization and data analysis to help researchers getting started with their image analysis. ZEN Desk: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. This arivis pro (TL) temporary license is valid for two years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact support-zeiss@arivis.com) with regular SW updates. The arivis pro (TL) package can only be sold together with a new microscopy system. After two years this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time (contact sales-zeiss@arivis.com).

arivis Software

Item has been added to the configuration

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN desk 3.11 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-311

ZEN desk 3.11 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-311

ZEN desk 3.11 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 / Windows 11 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Usingthis state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-310

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-310

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid forBiotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Packing and dust protection (1)

Dust covers

Item has been added to the configuration

Dust protection Set L

Recover

Item no.: 434304-0000-000

Dust protection Set L

Item Number: 434304-0000-000

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm

Advertising material (1)

Operating manuals

Item has been added to the configuration

IM Signal distribution box Rev3 EN

Recover

Item no.: 432927-7011-101

IM Signal distribution box Rev3 EN

Item Number: 432927-7011-101

IM Signal distribution box Rev3 EN

Fixed Stage microscope Axio Examiner.A1 for electrophysiology for bright field, oblique illumination and DIC