![SteREO Discovery.V12](/data/image/shop-catalog-system/group_10155.jpg)
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12
SteREO Discovery.V12 complete system for Correlative Microscopy
Item no.: 495007-0050-000 (individual configuration)SteREO Discovery.V12 complete system for Correlative Microscopy in materials analysis with incident-...
SteREO Discovery.V12 complete system for Correlative Microscopy
Item Number: 495007-0050-000 (individual configuration) Reset configurationTip
Current configuration
-
Cold-light source CL 9000 LED CAN (D)
Item no.: 435700-9000-000Cold-light source CL 9000 LED CAN (D)
Item Number: 435700-9000-000Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
-
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
Item no.: 435540-9005-000Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
Item Number: 435540-9005-000Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
-
Day Light Filter CL LED (D)
Item no.: 435700-9021-000Day Light Filter CL LED (D)
Item Number: 435700-9021-000Day Light Filter CL LED (D)
-
Adapter plate CorrMic with SEM interface; 160x116 (D)
Item no.: 432335-9181-000Adapter plate CorrMic with SEM interface; 160x116 (D)
Item Number: 432335-9181-000Adapter plate CorrMic with SEM interface; 160x116 (D) - for mounting of specimen holders CorrMic MAT with SEM adapter - plate size 160x116
-
Specimen holder CorrMic MAT Universal B Rev.2 (D)
Item no.: 432335-9102-000Specimen holder CorrMic MAT Universal B Rev.2 (D)
Item Number: 432335-9102-000Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage
-
Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°
Item no.: 426113-9010-000Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°
Item Number: 426113-9010-000Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg
-
Eyepiece PL 10x/23 Br. foc.
Item no.: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
Item Number: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
SteREO Discovery.V12 microscope body
Item no.: 435001-9901-000SteREO Discovery.V12 microscope body
Item Number: 435001-9901-000Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
-
System Control Panel SYCOP 3
Item no.: 435611-9010-000System Control Panel SYCOP 3
Item Number: 435611-9010-000System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
-
Manual Rotary Control MARC
Item no.: 435604-0000-000Manual Rotary Control MARC
Item Number: 435604-0000-000Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m
-
Controller EMS 3
Item no.: 435610-9011-000Controller EMS 3
Item Number: 435610-9011-000Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, cable 435403-9030 to focus motor 3 or 435610-5003 to motor 2 additionally required, - 1x SYCOP 3, 2x KL 2500 LCD, 2x footswitch, - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB to work station, 1x RS232 (D-Sub DE9), incl. USB cable 2m and country-specific power cable
-
Human Interface Panel HIP
Item no.: 435601-0000-000Human Interface Panel HIP
Item Number: 435601-0000-000Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
-
Binocular tube S 20°
Item no.: 435104-9901-000Binocular tube S 20°
Item Number: 435104-9901-000Binocular tube S 20° for 51-75mm eye distance
-
Objective Plan Apo S 1.5x FWD 30 mm
Item no.: 435226-0000-000Objective Plan Apo S 1.5x FWD 30 mm
Item Number: 435226-0000-000Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length)
-
Objective nosepiece S/doc, 3fold, 6x cod
Item no.: 435302-0000-000Objective nosepiece S/doc, 3fold, 6x cod
Item Number: 435302-0000-000Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment
-
Intermediate phototube S mot, right 100/100
Item no.: 435118-0000-000Intermediate phototube S mot, right 100/100
Item Number: 435118-0000-000Intermediate phototube S mot, right 100/100 motorized alternation per CAN command or push button between 100% light for camera or 100% for right eye; power supply by CAN distributor or plug-in supply RJ45-CAN via its 2 sockets; incl. 2 cables 0.5m and 1m
-
Motor focus 3 with column S 490mm
Item no.: 435403-9001-000Motor focus 3 with column S 490mm
Item Number: 435403-9001-000Motor focus 3 with column S 490mm - Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450
-
Stand base 450
Item no.: 435430-9903-000Stand base 450
Item Number: 435430-9903-000Stand base 450 WxDxH 449x346x30mm stand base with 3x M8 threaded holes, insert plate 450 and b/w plate D=120mm; compatible with column S 490/800 mm or T column 350mm and with transmitted light unit 450 or 450 mot or VisiLED transmitted light; stage d=84mm needs adapter 84/120 (435430-9010) additionally
-
Cable EMS3/CMD - focus motor 3
Item no.: 435403-9030-000Cable EMS3/CMD - focus motor 3
Item Number: 435403-9030-000Cable EMS3/CMD - focus motor 3
-
Measuring stage S 150x100 mot; CAN (D)
Item no.: 435465-9020-000Measuring stage S 150x100 mot; CAN (D)
Item Number: 435465-9020-000Measuring stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors, encoders and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 1µm - absolute accuracy +/- 2µm - interface d=120mm, BNC trigger and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination
-
Adapter frame S 160x116 epi-illumination (D)
Item no.: 435465-9050-000Adapter frame S 160x116 epi-illumination (D)
Item Number: 435465-9050-000Adapter frame S 160x116 epi-illumination (D) holding frames and plates 160x116 of Axio Imager are adapted to stages S 150x100, using together with transillumination top 450 mot (435500-9000) is not allowed
-
Insert plate S, metal 237x157x3mm (D)
Item no.: 435465-9052-000Insert plate S, metal 237x157x3mm (D)
Item Number: 435465-9052-000Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100
-
Microscopy Workstation Premium (HP Z8 G5) (O)
Item no.: 410203-9914-000Microscopy Workstation Premium (HP Z8 G5) (O)
Item Number: 410203-9914-000Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
-
System Configuration 2 for HP Z8 G5 (O)
Item no.: 000000-2615-590System Configuration 2 for HP Z8 G5 (O)
Item Number: 000000-2615-590System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
-
Processor Intel Xeon W5-3425 (HP Z8 G5) (O)
Item no.: 410330-1100-000Processor Intel Xeon W5-3425 (HP Z8 G5) (O)
Item Number: 410330-1100-000Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Default processor configuration - Intel Xeon W5-3425 (3.2 GHz, 30 MB cache, 12 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
-
Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Item no.: 410331-2800-000Graphics Card NVIDIA RTX A4000 16 GB DP (O)
Item Number: 410331-2800-000Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
-
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)
Item no.: 410303-3206-000Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)
Item Number: 410303-3206-000Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
-
Language Pack English US (O)
Item no.: 410380-0200-000Language Pack English US (O)
Item Number: 410380-0200-000Language Pack English US (O) - Keyboard with English (US) layout
-
Monitor TFT 24" HP Z24n G3 (61 cm) (O)
Item no.: 410350-2407-000Monitor TFT 24" HP Z24n G3 (61 cm) (O)
Item Number: 410350-2407-000Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
-
Microscopy Camera Axiocam 705 color R2 (D)
Item no.: 426560-9051-000Microscopy Camera Axiocam 705 color R2 (D)
Item Number: 426560-9051-000Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.
-
Dust protection Set M
Item no.: 434303-0000-000Dust protection Set M
Item Number: 434303-0000-000Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics
SteREO Discovery.V12 complete system for Correlative Microscopy in materials analysis with incident-light bright field