Axio Imager.A2
Axio Imager.A2
Axio Imager.A2 complete system for Correlative Microscopy
Item no.: 490022-0013-000 (individual configuration)Axio Imager.A2 complete system for Correlative Microscopy in Life Sciences with epi-fluorescence in ...
Axio Imager.A2 complete system for Correlative Microscopy
Item Number: 490022-0013-000 (individual configuration) Reset configurationTip
Current configuration
-
Axio Imager.A2 microscope stand
Item no.: 430005-9901-000Axio Imager.A2 microscope stand
Item Number: 430005-9901-000Axio Imager.A2 microscope stand - Z-drive man., with fine drive knob and fine drive disk, flat with scala, changeable - stage/condenser carrier, detachable - transmitted-light illumination man. - double filter wheel, discrete, man. with neutral-density filter set - Light Control man. with RS 232 interface - integrated 12V DC 100W power unit, stabilized, 100V...240V AC/50...60Hz/168VA - country-specific line cable and RS 232 cable
-
6-position objective nosepiece, HD DIC M27 cod.
Item no.: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
Item Number: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
-
6-position reflector turret man. cod. for P&C modules
Item no.: 424906-0000-0006-position reflector turret man. cod. for P&C modules
Item Number: 424906-0000-0006-position reflector turret man. cod. for P&C modules
-
Reflected-light illuminator for FL and HD for Axio Imager
Item no.: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager
Item Number: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager with shutter and with openings for manual stop sliders and filter wheels. Transmission range 340-1100 nm. With 340 nm and 1100 nm ~40%.
-
Antiglare screen
Item no.: 452163-0000-000Antiglare screen
Item Number: 452163-0000-000Antiglare screen
-
Stop slider man. with centerable luminous-field diaphragm
Item no.: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm
Item Number: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm slider stop position can be set
-
Stop slider with centerable aperture stop
Item no.: 423613-0000-000Stop slider with centerable aperture stop
Item Number: 423613-0000-000Stop slider with centerable aperture stop
-
Reflector module FL EC P&C
Item no.: 424931-0000-000Reflector module FL EC P&C
Item Number: 424931-0000-000Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
-
Illuminator microLED 3
Item no.: 423053-9074-000Illuminator microLED 3
Item Number: 423053-9074-000Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90
-
Illumination adapter for light guide (D)
Item no.: 423302-0000-000Illumination adapter for light guide (D)
Item Number: 423302-0000-000Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm
-
Illuminator HXP 120 V (D)
Item no.: 423013-9010-000Illuminator HXP 120 V (D)
Item Number: 423013-9010-000Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
-
Shutter remote control for HXP 120 V
Item no.: 000000-0544-644Shutter remote control for HXP 120 V
Item Number: 000000-0544-644Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.
-
Converter CAN - USB Rev.2 (D)
Item no.: 432909-9901-000Converter CAN - USB Rev.2 (D)
Item Number: 432909-9901-000Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable
-
DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item no.: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item Number: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
-
DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item no.: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item Number: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
-
Compensator mount 6x20
Item no.: 424705-0000-000Compensator mount 6x20
Item Number: 424705-0000-000Compensator mount 6x20
-
Analyzer module DIC ACR P&C shift free for transmitted light
Item no.: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light
Item Number: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.
-
Mechanical Stage 75x50 mot; CAN (D)
Item no.: 432024-9903-000Mechanical Stage 75x50 mot; CAN (D)
Item Number: 432024-9903-000Mechanical Stage 75x50 mot; CAN (D) for Axio Imager and SteREO - hard coating, linear encoders - stepper motor drive with integrated controller - connection via CAN bus - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - max sample weight: 1 kg - incl. CAN cable
-
Specimen holder CorrMic LS for cover glasses 22x22 mm (D)
Item no.: 432335-9300-000Specimen holder CorrMic LS for cover glasses 22x22 mm (D)
Item Number: 432335-9300-000Specimen holder CorrMic LS for cover glasses 22x22 mm (D) - dimension 76 mm x 26 mm - mounting for cover glasses 22 mm x 22 mm - 3 calibration reference points - incl. cover glasses high performance, D=0.17mm, 22 x 22 mm, box with 200 pc.
-
Specimen holder, special, for 2 slides 76x26 mm
Item no.: 432303-0000-000Specimen holder, special, for 2 slides 76x26 mm
Item Number: 432303-0000-000Specimen holder, special, for 2 slides 76x26 mm particularly for use with immersion objectives
-
Binocular Ergophototube 20°/23 (100:0/0:100), reversed image
Item no.: 425512-0000-000Binocular Ergophototube 20°/23 (100:0/0:100), reversed image
Item Number: 425512-0000-000Binocular Ergophototube 20°/23 (100:0/0:100), reversed image variable, continuous vertical adjustment 44 mm, camera port with interface 60N
-
Conversion filter 5700-3200 K, d=25 mm
Item no.: 427809-9010-000Conversion filter 5700-3200 K, d=25 mm
Item Number: 427809-9010-000Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light
-
Filter set 20 Rhodamin shift free (F)
Item no.: 488020-9901-000Filter set 20 Rhodamin shift free (F)
Item Number: 488020-9901-000Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640
-
Filter set 38 Endow GFP shift free (E)
Item no.: 000000-1031-346Filter set 38 Endow GFP shift free (E)
Item Number: 000000-1031-346Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.
-
Filter set 49 DAPI shift free (E)
Item no.: 488049-9901-000Filter set 49 DAPI shift free (E)
Item Number: 488049-9901-000Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50
-
Camera Adapter T2-C 1" 1.0x; adjustable
Item no.: 426105-0000-000Camera Adapter T2-C 1" 1.0x; adjustable
Item Number: 426105-0000-000Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)
-
Adapter 60N - T2 1.0x
Item no.: 426103-0000-000Adapter 60N - T2 1.0x
Item Number: 426103-0000-000Adapter 60N - T2 1.0x
-
Eyepiece PL 10x/23 Br. foc.
Item no.: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
Item Number: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
Objective EC Plan-Neofluar 10x/0.3 M27
Item no.: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27
Item Number: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)
-
Objective EC Plan-Neofluar 40x/0.75 M27
Item no.: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27
Item Number: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Objective EC Plan-Neofluar 20x/0.50 M27
Item no.: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27
Item Number: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)
-
Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item no.: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item Number: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item no.: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item Number: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC with switchable front lens, turret disk, with centerable Ph1, Ph2, Ph3 and D stops, already integrated, 3 mounts for DIC condenser modules, 1 separate position for bright field. For objective magnifications 1.0x-100x, WD=1.2mm
-
Condenser module DIC I/0.9 with polarizer
Item no.: 426701-0000-000Condenser module DIC I/0.9 with polarizer
Item Number: 426701-0000-000Condenser module DIC I/0.9 with polarizer
-
Condenser module DIC II/0.9 with polarizer
Item no.: 426702-0000-000Condenser module DIC II/0.9 with polarizer
Item Number: 426702-0000-000Condenser module DIC II/0.9 with polarizer
-
Condenser module DIC III/0.9 with polarizer
Item no.: 426703-0000-000Condenser module DIC III/0.9 with polarizer
Item Number: 426703-0000-000Condenser module DIC III/0.9 with polarizer
-
Joystick XY; CAN (D)
Item no.: 432903-9011-000Joystick XY; CAN (D)
Item Number: 432903-9011-000Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
-
Microscopy Workstation Compact HP Z2 G9 Rev. 2
Item no.: 410201-9914-000Microscopy Workstation Compact HP Z2 G9 Rev. 2
Item Number: 410201-9914-000Microscopy Workstation Compact HP Z2 G9 Rev. 2 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 / 192 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM BIOS selectable, default off - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit
-
Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)
Item no.: 410201-1606-000Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)
Item Number: 410201-1606-000Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9
-
Language Pack English US (O)
Item no.: 410380-0200-000Language Pack English US (O)
Item Number: 410380-0200-000Language Pack English US (O) - Keyboard with English (US) layout
-
System Configuration 2 for HP Z2 G9 (O)
Item no.: 000000-2548-754System Configuration 2 for HP Z2 G9 (O)
Item Number: 000000-2548-754System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9
-
Processor Intel Core i5-12500 (HP Z2 G9) (O)
Item no.: 410220-0400-000Processor Intel Core i5-12500 (HP Z2 G9) (O)
Item Number: 410220-0400-000Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9
-
Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)
Item no.: 410350-2408-000Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)
Item Number: 410350-2408-000Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
-
Microscopy Camera Axiocam 705 mono R2 (D)
Item no.: 426560-9061-000Microscopy Camera Axiocam 705 mono R2 (D)
Item Number: 426560-9061-000Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 # Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.
-
ZEN 3.11
Item no.: 410135-0002-311ZEN 3.11
Item Number: 410135-0002-311ZEN 3.11 Image acquisition and processing under Windows 10 / Windows 11 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)
-
ZEN Toolkit Connect
Item no.: 410136-0170-360ZEN Toolkit Connect
Item Number: 410136-0170-360ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)
-
Dust protection Set L
Item no.: 434304-0000-000Dust protection Set L
Item Number: 434304-0000-000Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm
Axio Imager.A2 complete system for Correlative Microscopy in Life Sciences with epi-fluorescence in combination with transmitted-light bright field and DIC