Axio Imager.D2
Axio Imager.D2
Microscope Axio Imager.D2, coded
Item no.: 490018-0004-000 (individual configuration)Microscope Axio Imager.D2, coded for epi-fluorescence in combination with transmitted-light bright f...
Microscope Axio Imager.D2, coded
Item Number: 490018-0004-000 (individual configuration) Reset configurationTip
Current configuration
-
Axio Imager.D2 microscope stand with Light Control man.
Item no.: 430001-9902-000Axio Imager.D2 microscope stand with Light Control man.
Item Number: 430001-9902-000Axio Imager.D2 microscope stand with Light Control man. - Z-drive man., with fine drive knob and fine drive disk, flat with scala, changeable - transmitted-light illumination man. - stage/condenser carrier, detachable - Light Control man. with RS 232 interface - integrated 12V DC 100W power unit, stabilized, 100V...240V AC/50...60Hz/168VA - country-specific line cable and RS 232 cable
-
6-position objective nosepiece, HD DIC M27 cod.
Item no.: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
Item Number: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
-
Double filter wheel, discrete, man., 2x4 positions
Item no.: 428300-9901-000Double filter wheel, discrete, man., 2x4 positions
Item Number: 428300-9901-000Double filter wheel, discrete, man., 2x4 positions each to accept neutral-density filter set and dia. 25 mm color filters. For use in transmitted-light and reflected-light equipment mot. and man.
-
10-position reflector turret mot. ACR, for P&C modules
Item no.: 424913-0000-00010-position reflector turret mot. ACR, for P&C modules
Item Number: 424913-0000-00010-position reflector turret mot. ACR, for P&C modules with automatic filter set and contrast module recognition
-
Reflected-light illuminator for FL and HD for Axio Imager
Item no.: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager
Item Number: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager with shutter and with openings for manual stop sliders and filter wheels. Transmission range 340-1100 nm. With 340 nm and 1100 nm ~40%.
-
Shutter for transmitted-light illumination
Item no.: 423621-9901-000Shutter for transmitted-light illumination
Item Number: 423621-9901-000Shutter for transmitted-light illumination switching time < 200 ms switching frequency max. 2 Hz
-
Antiglare screen
Item no.: 452163-0000-000Antiglare screen
Item Number: 452163-0000-000Antiglare screen
-
FL attenuator, discrete
Item no.: 423616-0000-000FL attenuator, discrete
Item Number: 423616-0000-000FL attenuator, discrete Insert for the aperture stop plane of reflected-light illuminators. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: attenuation with 70, 50, 40, 20 and 2% transmission.
-
Stop slider man. with centerable luminous-field diaphragm
Item no.: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm
Item Number: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm slider stop position can be set
-
Reflector module FL EC P&C
Item no.: 424931-0000-000Reflector module FL EC P&C
Item Number: 424931-0000-000Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
-
HAL 100 illuminator with quartz collector
Item no.: 423000-9901-000HAL 100 illuminator with quartz collector
Item Number: 423000-9901-000HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter
-
Illumination adapter for light guide (D)
Item no.: 423302-0000-000Illumination adapter for light guide (D)
Item Number: 423302-0000-000Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm
-
Illuminator HXP 120 V (D)
Item no.: 423013-9010-000Illuminator HXP 120 V (D)
Item Number: 423013-9010-000Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
-
Shutter remote control for HXP 120 V
Item no.: 000000-0544-644Shutter remote control for HXP 120 V
Item Number: 000000-0544-644Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.
-
Bulb 12V 100W Halogen Rectangular Filament
Item no.: 380059-1660-000Bulb 12V 100W Halogen Rectangular Filament
Item Number: 380059-1660-000Bulb 12V 100W Halogen Rectangular Filament
-
DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item no.: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item Number: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
-
DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item no.: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item Number: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
-
Compensator mount 6x20
Item no.: 424705-0000-000Compensator mount 6x20
Item Number: 424705-0000-000Compensator mount 6x20
-
Analyzer module DIC ACR P&C shift free for transmitted light
Item no.: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light
Item Number: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.
-
Mechanical stage 75x50 R basic, Axio Imager, hardcoat anodized surface
Item no.: 432035-9021-000Mechanical stage 75x50 R basic, Axio Imager, hardcoat anodized surface
Item Number: 432035-9021-000Mechanical stage 75x50 R basic, Axio Imager, hardcoat anodized surface 220 x 170 x 18 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting
-
Specimen holder for slide 76x26 mm for one-hand operation
Item no.: 432301-0000-000Specimen holder for slide 76x26 mm for one-hand operation
Item Number: 432301-0000-000Specimen holder for slide 76x26 mm for one-hand operation
-
Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image
Item no.: 425502-0000-000Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image
Item Number: 425502-0000-000Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image camera port with interface 60N
-
Filter set transm. light with neutral-density and color filters, d=25
Item no.: 487935-9010-000Filter set transm. light with neutral-density and color filters, d=25
Item Number: 487935-9010-000Filter set transm. light with neutral-density and color filters, d=25 consisting of 4 neutral-density filters with 1x 25%, 2x 6% and 1x 1.5% transmission, as well as 1x green filter and 1x conversion filter 3200-5500K. For integration in filter wheels, discrete, man. or mot. Not usable for HBO/XBO
-
Filter set 38 Endow GFP shift free (E)
Item no.: 000000-1031-346Filter set 38 Endow GFP shift free (E)
Item Number: 000000-1031-346Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.
-
Filter set 20 Rhodamin shift free (F)
Item no.: 488020-9901-000Filter set 20 Rhodamin shift free (F)
Item Number: 488020-9901-000Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640
-
Filter set 49 DAPI shift free (E)
Item no.: 488049-9901-000Filter set 49 DAPI shift free (E)
Item Number: 488049-9901-000Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50
-
Eyepiece PL 10x/25 Br. foc.
Item no.: 444034-9000-000Eyepiece PL 10x/25 Br. foc.
Item Number: 444034-9000-000Eyepiece PL 10x/25 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
Objective EC Plan-Neofluar 5x/0.16 M27
Item no.: 420330-9901-000Objective EC Plan-Neofluar 5x/0.16 M27
Item Number: 420330-9901-000Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)
-
Objective EC Plan-Neofluar 10x/0.3 M27
Item no.: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27
Item Number: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)
-
Objective EC Plan-Neofluar 20x/0.50 M27
Item no.: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27
Item Number: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)
-
Objective EC Plan-Neofluar 40x/0.75 M27
Item no.: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27
Item Number: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item no.: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item Number: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item no.: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item Number: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC with switchable front lens, turret disk, with centerable Ph1, Ph2, Ph3 and D stops, already integrated, 3 mounts for DIC condenser modules, 1 separate position for bright field. For objective magnifications 1.0x-100x, WD=1.2mm
-
Condenser module DIC I/0.9 with polarizer
Item no.: 426701-0000-000Condenser module DIC I/0.9 with polarizer
Item Number: 426701-0000-000Condenser module DIC I/0.9 with polarizer
-
Condenser module DIC II/0.9 with polarizer
Item no.: 426702-0000-000Condenser module DIC II/0.9 with polarizer
Item Number: 426702-0000-000Condenser module DIC II/0.9 with polarizer
-
Condenser module DIC III/0.9 with polarizer
Item no.: 426703-0000-000Condenser module DIC III/0.9 with polarizer
Item Number: 426703-0000-000Condenser module DIC III/0.9 with polarizer
-
Dust protection Set L
Item no.: 434304-0000-000Dust protection Set L
Item Number: 434304-0000-000Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm
Microscope Axio Imager.D2, coded for epi-fluorescence in combination with transmitted-light bright field and DIC, with phototube 30°/25.