Microscope Axioscope 7 LED for epi-fluorescence B/G

Microscope stand Axioscope 7, TL/FL MOT, 6x H DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 100W - dovetail mount for attachable stage carriers - motorized parfocality function - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - auto mechanical safety shutter - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 100W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - snap button supports on ZEISS Axiocam - USB 2.0 to PC - CAN interface for motorized stage - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP /Colibr i - nosepiece 6x brightfield DIC, M27, encoded - dovetail mount for encoded changeable reflector turrets and reflector slider - built in illumination adapter, achromatic - mount for luminous-field diaphragm slider - mount for aperture stop slider or FL attenuator - mount for adjusting aid for HBO/XBO - mount for filter slider R, 14x40 mm d=25mm - mount for polarizer slider A 6x30 mm

Stage carrier D/A; attachable and vertically adjustable for Axioscope, to accommodate screw-on stages

Condenser carrier with vertical adjustment on both sides for use with attachable Axio Scope stage carriers, adjustable height stop

Reflector turret 4x encoded, changeable, for P & C modules

Antiglare screen

Solid-State Light source Colibri 3, Type GB 2-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL stand for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via OnScreenDisplay (OSD) for Axioscope with Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 2 solid state LED lamps. - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes

Mechanical stage 75x50 R with hardcoat anodized surface - 220 x 150 mm stage plate - rackless X-guide positioned at bottom, hidden gear in Y-guide - right drive 135 mm (extendable by 15 mm), with friction setting

Specimen holder for two slides 76x26mm, spring lever left

Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N

Filter Set 56 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 56 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 475 and 555 nm. Consisting of filters DFT 490 + 575 and DBP 512/30 + 630/98 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Camera Adapter 60N-C 2/3" 0.63x

Eyepiece PL 10x/23 Br. foc.

Eyepiece eyecup

Objective EC Plan-Neofluar 2.5x/0.085 M27 (FWD=8.8mm)

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Condenser 0.9/1.25 H For objectives 5x-100x, compatible with low-power system for objectives 2.5x/4x, WD=0.8mm

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.