Home
Upright microscopes
Axioscope 5/7
Axioscope 7
Microscope Axioscope 7 RL BF/DF

Axioscope 7

Microscope Axioscope 7 RL BF/DF

Item no.: 490042-0001-000 (individual configuration)

Description

Microscope Axioscope 7 RL BF/DF LED for reflected-light bright field and dark field, with phototube

Full description

Microscope Axioscope 7 RL BF/DF

Item Number: 490042-0001-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Measurement Software

0 added 0 removed

Upgrades

0 added 0 removed

License software

0 added 0 removed

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded

Recover

Item no.: 430035-9330-000

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded

Item Number: 430035-9330-000

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 12V 100W - dovetail mount for attachable stage carriers - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 90W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button on right side supports on ZEISS Axiocam - Motion button on left side for motorized stage movement - USB 2.0 to PC - CAN interface for motorized stage - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP/Colibri - brightfield/darkfield reflected light illuminator LED 10W white - nosepiece 6x brightfield/darkfield DIC, M27, encoded - dovetail mount for encoded changeable reflector turrets and reflector Slider - built in illumination adapter, achromatic - built in luminous-field diaphragm slider - built in aperture stop slider - mount for filter slider A 14x40 mm d=25mm - mount for polarizer slider A 6x30 mm

Stand accessories

0 added 0 removed

Stage carrier D/A; attachable and vertically adjustable

Recover

Item no.: 430710-9001-000

Stage carrier D/A; attachable and vertically adjustable

Item Number: 430710-9001-000

Stage carrier D/A; attachable and vertically adjustable for Axioscope, to accommodate screw-on stages
Reflector turret 4x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9061-000

Reflector turret 4x encoded, changeable, for P&C modules

Item Number: 424940-9061-000

Reflector turret 4x encoded, changeable, for P & C modules

Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light
Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Bulbs

0 added 0 removed

Polarization

0 added 0 removed

Stages and accessories

0 added 0 removed

Mechanical stage 80x60 mot standard; CAN (D)

Recover

Item no.: 432039-9200-000

Mechanical stage 80x60 mot standard; CAN (D)

Item Number: 432039-9200-000

Mechanical stage 80x60 mot standard; CAN (D) for Axioscope 7 -Travel range: 80mm x 60mm - Max. velocity: 25mm/s - Smallest movement: 0.5um - Repeatability : # ±3um (bi-directional, measured according to ISO 230.2) - Accuracy (full range): # ±10um (measured according to ISO 230.2) - Max. payload: 1Kg
Mounting frame for two slides 76x26 (D)

Recover

Item no.: 432318-9000-000

Mounting frame for two slides 76x26 (D)

Item Number: 432318-9000-000

Mounting frame for two slides 76x26 (D) - frame size 160x116
Metal Insert Plate (D)

Recover

Item no.: 432313-0000-000

Metal Insert Plate (D)

Item Number: 432313-0000-000

Metal Insert Plate (D) plane plate, horizontally fine adjustable - frame size 160x116 - with grid lines

Tubes and accessories

0 added 0 removed

Binocular phototube 30°/23 (50:50), reversed image

Recover

Item no.: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image

Item Number: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image camera port with interface 60N

Intermediate tubes

0 added 0 removed

Optovar systems

0 added 0 removed

Filters

0 added 0 removed

Photomicrography

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Objective EC Epiplan 5x/0.13 BD M27

Recover

Item no.: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27

Item Number: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27 (FWD=11.8mm)
Objective EC Epiplan 10x/0.25 BD M27

Recover

Item no.: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27

Item Number: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27 (FWD=11.0mm)
Objective EC Epiplan 20x/0.4 BD M27

Recover

Item no.: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27

Item Number: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27 (FWD=3.2mm)
Objective EC Epiplan 50x/0.75 BD M27

Recover

Item no.: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27

Item Number: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27 (FWD=1.0mm)

Condensers

0 added 0 removed

Stereomicroscopes

0 added 0 removed

Connecting cables

0 added 0 removed

Control devices

0 added 0 removed

Image processing

0 added 0 removed

Services

0 added 0 removed

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Microscope Axioscope 7 RL BF/DF
Item Number: 490042-0001-000 (individual configuration)
Measurement Software (4)

NEO Software

Item has been added to the configuration

NEO autocad in, BasLic, PC

Recover

Item no.: 662002-0206-103

NEO autocad in, BasLic, PC

Item Number: 662002-0206-103

NEO autocad in, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software interface for import of CAD data im dxf- and dwg format

Item has been added to the configuration

NEO PiWeb reporting plus, BasLic, PC

Recover

Item no.: 662002-0206-011

NEO PiWeb reporting plus, BasLic, PC

Item Number: 662002-0206-011

NEO PiWeb reporting plus, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software option for statistical evaluations with graphical display of results - simulataneous measuring and data evaluation - evaluations of up to 1000 measurement processes per inspection plan - investivations of measuring tool capability - additional protocol templates

Item has been added to the configuration

NEO pixel, BasLic, PC

Recover

Item no.: 662002-0206-006

NEO pixel, BasLic, PC

Item Number: 662002-0206-006

NEO pixel, BasLic, PC - basic license for software in current version - PC-bound license - measurement data obtained from image data Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click & Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

NEO q-das out, BasLic, PC

Recover

Item no.: 662002-0206-002

NEO q-das out, BasLic, PC

Item Number: 662002-0206-002

NEO q-das out, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

Upgrades (3)

NEO Upgrade

Item has been added to the configuration

UPG ZAPHIRE AutoCAD IN PC Lic

Recover

Item no.: 662012-0300-103

UPG ZAPHIRE AutoCAD IN PC Lic

Item Number: 662012-0300-103

ZAPHIRE autocad in, Upgrade, PC - software upgrade to current version - PC-bound license

Item has been added to the configuration

UPG ZAPHIRE PiWeb rep plus PC Lic

Recover

Item no.: 662012-0300-011

UPG ZAPHIRE PiWeb rep plus PC Lic

Item Number: 662012-0300-011

ZAPHIRE PiWeb reporting plus, Upgrade, PC - software upgrade to current version - PC-bound license

Item has been added to the configuration

UPG ZAPHIRE Q-DAS OUT PC Lic

Recover

Item no.: 662012-0300-002

UPG ZAPHIRE Q-DAS OUT PC Lic

Item Number: 662012-0300-002

ZAPHIRE q-das out, Upgrade, PC - software upgrade to current version - PC-bound license

License software (4)

NEO

Item has been added to the configuration

ZAPHIRE autocad in, BasLic, PC

Recover

Item no.: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC

Item Number: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for import of CAD data im dxf- and dwg format

Item has been added to the configuration

ZAPHIRE PiWeb reporting plus, BasLic, PC

Recover

Item no.: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC

Item Number: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software option for statistical evaluations with graphical display of results - simulataneous measuring and data evaluation - evaluations of up to 1000 measurement processes per inspection plan - investivations of measuring tool capability - additional protocol templates

Item has been added to the configuration

ZAPHIRE offline evaluation, BasLic, PC

Recover

Item no.: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC

Item Number: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC for ZEISS microscopes - basic license for software in current version - PC-bound license - measurement data obtained from image data in CZI format Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click and Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

ZAPHIRE q-das out, BasLic, PC

Recover

Item no.: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC

Item Number: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

Microscope stands upright (5)

Routine microscopes

Item has been added to the configuration

Microscope stand Axioscope 7, RL MOT, 6x HD DIC encoded

Recover

Item no.: 430035-9340-000

Microscope stand Axioscope 7, RL MOT, 6x HD DIC encoded

Item Number: 430035-9340-000

Microscope stand Axioscope 7, RL MOT, 6x HD DIC encoded - lower stand part with dovetail mount for attachable stage carriers - motorized parfocality function - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - integrated 24V DC 100W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button on right side supports on ZEISS Axiocam - Motion button on left side for motorized stage movement - USB 2.0 to PC - CAN interface for motorized stage - dust cover - upper stand part with dovetail interface for reflected illumination HAL 100 - brightfield/darkfield reflected light illumination with white LED 10W - nosepiece 6x brightfield/darkfield DIC, M27, encoded - dovetail mount for encoded changeable reflector turrets and reflector slider - built in illumination adapter, achromatic - built in luminous-field diaphragm slider - built in aperture stop slider - mount for filter slider A 14x40 mm d=25mm - mount for polarizer slider A 6x30 mm

Item has been added to the configuration

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded

Recover

Item no.: 430035-9330-000

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded

Item Number: 430035-9330-000

Microscope stand Axioscope 7, TL/RL MAT MOT, 6x HD DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 12V 100W - dovetail mount for attachable stage carriers - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 90W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button on right side supports on ZEISS Axiocam - Motion button on left side for motorized stage movement - USB 2.0 to PC - CAN interface for motorized stage - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP/Colibri - brightfield/darkfield reflected light illuminator LED 10W white - nosepiece 6x brightfield/darkfield DIC, M27, encoded - dovetail mount for encoded changeable reflector turrets and reflector Slider - built in illumination adapter, achromatic - built in luminous-field diaphragm slider - built in aperture stop slider - mount for filter slider A 14x40 mm d=25mm - mount for polarizer slider A 6x30 mm

Item has been added to the configuration

Microscope stand Axioscope 7, TL/FL MOT, 6x H DIC encoded

Recover

Item no.: 430035-9320-000

Microscope stand Axioscope 7, TL/FL MOT, 6x H DIC encoded

Item Number: 430035-9320-000

Microscope stand Axioscope 7, TL/FL MOT, 6x H DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 100W - dovetail mount for attachable stage carriers - motorized parfocality function - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - auto mechanical safety shutter - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 100W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - snap button supports on ZEISS Axiocam - USB 2.0 to PC - CAN interface for motorized stage - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP /Colibr i - nosepiece 6x brightfield DIC, M27, encoded - dovetail mount for encoded changeable reflector turrets and reflector slider - built in illumination adapter, achromatic - mount for luminous-field diaphragm slider - mount for aperture stop slider or FL attenuator - mount for adjusting aid for HBO/XBO - mount for filter slider R, 14x40 mm d=25mm - mount for polarizer slider A 6x30 mm

Item has been added to the configuration

Microscope stand Axioscope 7, TL MOT, 6x H DIC encoded

Recover

Item no.: 430035-9310-000

Microscope stand Axioscope 7, TL MOT, 6x H DIC encoded

Item Number: 430035-9310-000

Microscope stand Axioscope 7, TL MOT, 6x H DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 100W - dovetail mount for attachable stage carriers - motorized parfocality function - 24 mm motorized focus lift (min. step width 78 nm), adjustable focus stop - 6-position filter wheel for dia. 36 mm filters in TL - mount for 2-position filter slider 14x40, d=36 mm - integrated 24V DC 100W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button supports ZEISS Axiocam - USB 2.0 to PC - CAN interface for motorized stage - dust cover - filter holder in TL - upper stand part for transmitted light with nosepiece 6x brightfield DIC, M27, encoded

Item has been added to the configuration

Microscope stand Axioscope 5, TL HAL 50, 6x H encoded

Recover

Item no.: 430035-9032-000

Microscope stand Axioscope 5, TL HAL 50, 6x H encoded

Item Number: 430035-9032-000

Microscope stand Axioscope 5, TL HAL 50, 6x H encoded - lower stand part for HAL 50W illumination with deck star interface - transmitted-light illumination with attachment lamp for reflector lamp 12V 50W - dovetail mount for attachable stage carriers - 24 mm focus lift, adjustable focus stop - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40,d=36 mm - integrated 24V DC 60W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button supports on ZEISS Axiocam - USB 2.0 to PC - dust cover - filter holder in TL - upper stand part for transmitted light with nosepiece 6x H, M27, encoded - dovetail mount for changeable reflector turrets and reflector slider

Stand accessories (15)

Stage carrier

Item has been added to the configuration

Stage carrier H=140 mm for base plate Axio Scope Vario

Recover

Item no.: 451016-9902-000

Stage carrier H=140 mm for base plate Axio Scope Vario

Item Number: 451016-9902-000

Stage carrier H=140 mm for base plate Axio Scope Vario

Item has been added to the configuration

Stage carrier TL/RL; attachable and vertically adjustable

Recover

Item no.: 430710-9011-000

Stage carrier TL/RL; attachable and vertically adjustable

Item Number: 430710-9011-000

Stage carrier TL/RL; attachable and vertically adjustable for Axioscope, to accommodate screw-on and rotary stages with dovetail mount

Item has been added to the configuration

Stage carrier D/A; attachable and vertically adjustable

Recover

Item no.: 430710-9001-000

Stage carrier D/A; attachable and vertically adjustable

Item Number: 430710-9001-000

Stage carrier D/A; attachable and vertically adjustable for Axioscope, to accommodate screw-on stages

Manual reflector turret

Item has been added to the configuration

Reflector turret 4x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9061-000

Reflector turret 4x encoded, changeable, for P&C modules

Item Number: 424940-9061-000

Reflector turret 4x encoded, changeable, for P & C modules

Item has been added to the configuration

Reflector turret 6x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9001-000

Reflector turret 6x encoded, changeable, for P&C modules

Item Number: 424940-9001-000

Reflector turret 6x encoded, changeable, for P&C modules

Filter mounts

Item has been added to the configuration

Color filter carrier

Recover

Item no.: 451834-0000-000

Color filter carrier

Item Number: 451834-0000-000

Color filter carrier

Item has been added to the configuration

Color filter carrier 3x for filter d=32 mm

Recover

Item no.: 428305-0000-000

Color filter carrier 3x for filter d=32 mm

Item Number: 428305-0000-000

Color filter carrier 3x for filter d=32 mm

Condenser carrier

Item has been added to the configuration

Condenser carrier with vertical adjustment on both sides

Recover

Item no.: 430720-9001-000

Condenser carrier with vertical adjustment on both sides

Item Number: 430720-9001-000

Condenser carrier with vertical adjustment on both sides for use with attachable Axio Scope stage carriers, adjustable height stop

Various stand accessories

Item has been added to the configuration

Adapter for expansion of specimen area by 60 mm

Recover

Item no.: 430030-9111-000

Adapter for expansion of specimen area by 60 mm

Item Number: 430030-9111-000

Adapter for expansion of specimen area by 60 mm Insert between upper and lower part of the Axioscope. Expansion to max. sample height of altogether 110 mm.

Item has been added to the configuration

Foot plate for Axioscope 5 using HAL100

Recover

Item no.: 000000-2202-526

Foot plate for Axioscope 5 using HAL100

Item Number: 000000-2202-526

Foot plate for Axioscope 5 using HAL100

Filter slider

Item has been added to the configuration

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm

Recover

Item no.: 428307-9000-000

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm

Item Number: 428307-9000-000

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm for reflected light with shutter function

Item has been added to the configuration

Filter slider D 14x40 mm, 2 positions for filter diameter 36 mm

Recover

Item no.: 423910-9000-000

Filter slider D 14x40 mm, 2 positions for filter diameter 36 mm

Item Number: 423910-9000-000

Filter slider D 14x40 mm, 2 positions for filter diameter 36 mm for transmitted light

Item has been added to the configuration

FilterSliderA 3x f/filter25mm14x40Module

Recover

Item no.: 423730-9580-000

FilterSliderA 3x f/filter25mm14x40Module

Item Number: 423730-9580-000

FilterSliderA 3x f/filter25mm14x40Module Consisting of: Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function

Item has been added to the configuration

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm

Recover

Item no.: 423730-9080-000

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm

Item Number: 423730-9080-000

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function

Manual filter magazine

Item has been added to the configuration

Slider 14x40 FL attenuator, discrete

Recover

Item no.: 423730-9130-000

Slider 14x40 FL attenuator, discrete

Item Number: 423730-9130-000

Slider 14x40 FL attenuator, discrete For insert into the aperture stop plane of reflected-light illuminator. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.

Transmitted-light illumination (1)

Transmitted-light illumination

Item has been added to the configuration

LED illuminator for transmitted light

Recover

Item no.: 423904-9902-000

LED illuminator for transmitted light

Item Number: 423904-9902-000

LED illuminator for transmitted light for direct attachment to the condenser carrier. Includes sliders with diffusion disk with 10° divergence angle for visual observation and with 80° divergence angle for documentation. Slider can also be used as shutter against interfering autofluorescence of the LEDs in epi-fluorescence applications.

Reflected-light illumination (16)

Reflector modules

Item has been added to the configuration

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Recover

Item no.: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Item Number: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable Filter equipment in Axio Imager.Z2 or Axio Observer.Z1 freely programmable. Contains a diaphragm for covering light from the objective's darkfield channel. Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module with analyzer ACR P&C for reflected light

Recover

Item no.: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item Number: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item has been added to the configuration

Reflector module C-DIC/TIC ACR P&C for reflected light

Recover

Item no.: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light

Item Number: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization

Item has been added to the configuration

Reflector module DIC/Pol ACR P&C shift free for reflected light

Recover

Item no.: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light

Item Number: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other

Item has been added to the configuration

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Recover

Item no.: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Item Number: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light suitable for color DIC and polarization in reflected light, consisting of two Pol filters with lambda plate that are firmly oriented towards each other

Item has been added to the configuration

Reflector module FL EC P&C

Recover

Item no.: 424931-0000-000

Reflector module FL EC P&C

Item Number: 424931-0000-000

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item has been added to the configuration

Reflector module BF f/RF ACR P&C Module

Recover

Item no.: 424928-9500-000

Reflector module BF f/RF ACR P&C Module

Item Number: 424928-9500-000

Reflector module BF f/RF ACR P<(>&<)>C Module Consisting of: Reflector module bright field ACR P<(>&<)>C for reflected light

Item has been added to the configuration

Reflector module polarizer ACR P&C for reflected light

Recover

Item no.: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item Number: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item has been added to the configuration

Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Fluorescence protection devices

Item has been added to the configuration

Antiglare screen

Recover

Item no.: 452163-0000-000

Antiglare screen

Item Number: 452163-0000-000

Antiglare screen

Various accessories for reflected-light illumination

Item has been added to the configuration

Intermediate plate for analyzer slider 12x46

Recover

Item no.: 425313-9020-000

Intermediate plate for analyzer slider 12x46

Item Number: 425313-9020-000

Intermediate plate for analyzer slider 12x46 incl. tube-lens, with slot for use of analyzer sliders from the Axio Imager line

Reflector mounts

Item has been added to the configuration

Reflector slider 2x encoded, changeable, for P&C modules

Recover

Item no.: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

Item Number: 424940-9051-000

Reflector slider 2x encoded, changeable, for P&C modules

Aperture diaphragm slider

Item has been added to the configuration

Stop slider A 14x40 mm Module

Recover

Item no.: 423730-9651-000

Stop slider A 14x40 mm Module

Item Number: 423730-9651-000

Stop slider A 14x40 mm Module Consisting of: Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1

Item has been added to the configuration

Stop slider A 14x40 mm with aperture/luminous field diaphragm

Recover

Item no.: 423730-9151-000

Stop slider A 14x40 mm with aperture/luminous field diaphragm

Item Number: 423730-9151-000

Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1

Item has been added to the configuration

Stop slider A 14x40 mm with luminous-field diaphragm

Recover

Item no.: 423730-9100-000

Stop slider A 14x40 mm with luminous-field diaphragm

Item Number: 423730-9100-000

Stop slider A 14x40 mm with luminous-field diaphragm usable with reflected-light illuminator HD DIC

Lamps and Lamp housings (19)

Switching mirrors

Item has been added to the configuration

Switching mirror for 2 illuminators

Recover

Item no.: 447230-9903-000

Switching mirror for 2 illuminators

Item Number: 447230-9903-000

Switching mirror for 2 illuminators

Adjusting aids

Item has been added to the configuration

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Recover

Item no.: 423730-9120-000

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Item Number: 423730-9120-000

Adjusting aid for HBO/XBO for Axioscope/Axio Examiner

Various lamp accessories

Item has been added to the configuration

Sheathing for Light Guide HXP for Stabilization

Recover

Item no.: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization

Item Number: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization Stabilization of position of the light guide in operation. Avoidance of variation in illumination uniformity due to unwanted movement of the light guide.

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Adapters

Item has been added to the configuration

Illumination adapter for light guide (D)

Recover

Item no.: 423302-0000-000

Illumination adapter for light guide (D)

Item Number: 423302-0000-000

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

LED lamps

Item has been added to the configuration

Illuminator microLED 3

Recover

Item no.: 423053-9074-000

Illuminator microLED 3

Item Number: 423053-9074-000

Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90

Item has been added to the configuration

Solid-State Light source Colibri 3, Type RGB-UV

Recover

Item no.: 423052-9505-000

Solid-State Light source Colibri 3, Type RGB-UV

Item Number: 423052-9505-000

Solid-State Light source Colibri 3, Type RGB-UV 4-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL SCB for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via, OnScreenDisplay (OSD) for Axioscope with in Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 4 solid state LED lamps. - Red (625nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes - UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258

Item has been added to the configuration

Solid-State Light source Colibri 3, Type GB

Recover

Item no.: 423052-9450-000

Solid-State Light source Colibri 3, Type GB

Item Number: 423052-9450-000

Solid-State Light source Colibri 3, Type GB 2-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL stand for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via OnScreenDisplay (OSD) for Axioscope with Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 2 solid state LED lamps. - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes

Item has been added to the configuration

Solid-State Light source Colibri 3, Type GB-UV

Recover

Item no.: 423052-9440-000

Solid-State Light source Colibri 3, Type GB-UV

Item Number: 423052-9440-000

Solid-State Light source Colibri 3, Type GB-UV 3-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL SCB stand for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via OnScreenDisplay (OSD) for Axioscope with Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 3 solid state LED lamps. - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes - UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258

Item has been added to the configuration

Illuminator RL LED 10W CRI90 Axioscope

Recover

Item no.: 423005-9011-000

Illuminator RL LED 10W CRI90 Axioscope

Item Number: 423005-9011-000

Illuminator RL LED 10W CRI90 Axioscope - replacement for supplied reflected light illuminator LED 10W

Item has been added to the configuration

Illuminator TL LED 10W CRI90 Axioscope

Recover

Item no.: 423005-9001-000

Illuminator TL LED 10W CRI90 Axioscope

Item Number: 423005-9001-000

Illuminator TL LED 10W CRI90 Axioscope - replacement for the supplied transmitted light illuminator LED 10W

Cold-light sources

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

Item has been added to the configuration

Control panel speedDIAL X-Cite Xylis

Recover

Item no.: 423006-9010-000

Control panel speedDIAL X-Cite Xylis

Item Number: 423006-9010-000

Control panel speedDIAL X-Cite Xylis

Item has been added to the configuration

Light Source X-Cite Xylis II

Recover

Item no.: 423006-9001-000

Light Source X-Cite Xylis II

Item Number: 423006-9001-000

Light Source X-Cite Xylis II LED-based white light source for fluorescence excitation Wavelength Range: 380-770 nm LED Peaks (nm): 385, 430, 475, 545, 650, 735 Software control through ZEN Manual control through control panel speedDIAL (optional component, not included) TTL on/off, USB, LED on/off response Times: 100 μs TTL / 1 ms USB Incl. 3 mm liquid light guide (1,5 m) A country-specific power cable is included in delivery. To mount the light source at the microscope stand the Illuminationadapter for light guide is required.

HBO/XBO lamp housing

Item has been added to the configuration

HBO 100 illuminator, self-adjusting with lamp mount and collector

Recover

Item no.: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector

Item Number: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector including heat-reflecting filter and 2m connection cable. Automatic lamp alignment

Item has been added to the configuration

HBO 100 illuminator with lamp mount and collector

Recover

Item no.: 423010-0000-000

HBO 100 illuminator with lamp mount and collector

Item Number: 423010-0000-000

HBO 100 illuminator with lamp mount and collector incl. heat-reflecting filter and 2m connection cable

Item has been added to the configuration

HBO 50 illuminator with collector

Recover

Item no.: 423003-9000-000

HBO 50 illuminator with collector

Item Number: 423003-9000-000

HBO 50 illuminator with collector and lamp mount and heat-reflecting filter

Low-voltage and halogen lamp housings

Item has been added to the configuration

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Light guides

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (4)

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 50 AC L1 (F)

Recover

Item no.: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item Number: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item has been added to the configuration

Burner Mercury - HBO 103 W/2 (F)

Recover

Item no.: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item Number: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Halogen lamps

Item has been added to the configuration

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (4)

Various electrical accessories

Item has been added to the configuration

Converter CAN - USB Rev.2 (D)

Recover

Item no.: 432909-9901-000

Converter CAN - USB Rev.2 (D)

Item Number: 432909-9901-000

Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable

Power units

Item has been added to the configuration

Power supply external for HAL 100 and LED lamps

Recover

Item no.: 432610-9060-000

Power supply external for HAL 100 and LED lamps

Item Number: 432610-9060-000

Power supply external for HAL 100 and LED lamps stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Incl. 2 lamp sockets for HAL 100/VIS-LED with switch. With country-specific line cable.

Ballasts

Item has been added to the configuration

Power supply unit for HBO 50

Recover

Item no.: 432607-0000-000

Power supply unit for HBO 50

Item Number: 432607-0000-000

Power supply unit for HBO 50 100...240V, 50...60 Hz, 90VA

Item has been added to the configuration

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Recover

Item no.: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Item Number: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA with resettable hour meter at the front

Polarization (74)

Compensators

Item has been added to the configuration

Compensator Lambda/4, 6x20

Recover

Item no.: 473714-0000-000

Compensator Lambda/4, 6x20

Item Number: 473714-0000-000

Compensator Lambda/4, 6x20

Item has been added to the configuration

Compensator Lambda, 6x20

Recover

Item no.: 473704-0000-000

Compensator Lambda, 6x20

Item Number: 473704-0000-000

Compensator Lambda, 6x20

Item has been added to the configuration

Compensator Lambda, rotary, +/-8° 6x20

Recover

Item no.: 453710-0000-000

Compensator Lambda, rotary, +/-8° 6x20

Item Number: 453710-0000-000

Compensator Lambda, rotary, +/-8° 6x20 usable only for transmitted light

Item has been added to the configuration

Wedge compensator 0-4 Lambda, 6x20 (D)

Recover

Item no.: 000000-1140-663

Wedge compensator 0-4 Lambda, 6x20 (D)

Item Number: 000000-1140-663

Wedge compensator 0-4 Lambda, 6x20 (D)

Item has been added to the configuration

Tilting compensator B 0-5 Lambda, 6x20 (D)

Recover

Item no.: 000000-1115-700

Tilting compensator B 0-5 Lambda, 6x20 (D)

Item Number: 000000-1115-700

Tilting compensator B 0-5 Lambda, 6x20 (D)

Item has been added to the configuration

Tilting compensator K 0-30 Lambda, 6x20 (D)

Recover

Item no.: 000000-1115-698

Tilting compensator K 0-30 Lambda, 6x20 (D)

Item Number: 000000-1115-698

Tilting compensator K 0-30 Lambda, 6x20 (D)

Polarizers D

Item has been added to the configuration

Polarizing filter 32 mm

Recover

Item no.: 473600-0000-000

Polarizing filter 32 mm

Item Number: 473600-0000-000

Polarizing filter 32 mm

Item has been added to the configuration

Circular polarizer D

Recover

Item no.: 453623-0000-000

Circular polarizer D

Item Number: 453623-0000-000

Circular polarizer D including slider 6x20 with compensator Lambda/4

Item has been added to the configuration

Polarizer fixed with lambda plate rotatable

Recover

Item no.: 445226-0000-000

Polarizer fixed with lambda plate rotatable

Item Number: 445226-0000-000

Polarizer fixed with lambda plate rotatable

Item has been added to the configuration

Polarizer D, fixed for modulator disk

Recover

Item no.: 427710-9070-000

Polarizer D, fixed for modulator disk

Item Number: 427710-9070-000

Polarizer D, fixed for modulator disk

Item has been added to the configuration

Polarizer slider for LED illumination transmitted light

Recover

Item no.: 427708-9901-000

Polarizer slider for LED illumination transmitted light

Item Number: 427708-9901-000

Polarizer slider for LED illumination transmitted light including diffusion disk with 10° divergence angle. The slider can also be used as shutter against interfering autofluorescence of the LEDs in epi-fluorescence applications.

Item has been added to the configuration

Polarizer D, 90° rotatable with color filter carrier

Recover

Item no.: 427707-0000-000

Polarizer D, 90° rotatable with color filter carrier

Item Number: 427707-0000-000

Polarizer D, 90° rotatable with color filter carrier

Item has been added to the configuration

Polarizer D, 90° rotatable, removable

Recover

Item no.: 427706-0000-000

Polarizer D, 90° rotatable, removable

Item Number: 427706-0000-000

Polarizer D, 90° rotatable, removable

Item has been added to the configuration

Circular polarizing equipment D ACR, with rotatable lambda/4 plate

Recover

Item no.: 427703-9902-000

Circular polarizing equipment D ACR, with rotatable lambda/4 plate

Item Number: 427703-9902-000

Circular polarizing equipment D ACR, with rotatable lambda/4 plate for transmitted light, including reflector module Lambda/4, ACR P <(>&<)>C. In addition an analyzer slider D/A is required.

Item has been added to the configuration

Circular polarizing equipment D ACR, with rotatable lambda/4 plate

Recover

Item no.: 427703-9901-000

Circular polarizing equipment D ACR, with rotatable lambda/4 plate

Item Number: 427703-9901-000

Circular polarizing equipment D ACR, with rotatable lambda/4 plate for transmitted light, including reflector module Lambda/4, ACR P &C. In addition an analyzer slider D/A is required.

Item has been added to the configuration

Polarizer D, fixed, removable

Recover

Item no.: 427701-0000-000

Polarizer D, fixed, removable

Item Number: 427701-0000-000

Polarizer D, fixed, removable

Analyzers

Item has been added to the configuration

Analyzer slide D fixed with lambda plate, 6x20

Recover

Item no.: 453681-0000-000

Analyzer slide D fixed with lambda plate, 6x20

Item Number: 453681-0000-000

Analyzer slide D fixed with lambda plate, 6x20

Item has been added to the configuration

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Recover

Item no.: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Item Number: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10° position 1 with analyzer and Lambda plate each rotatable by +/- 10°, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer slider fixed for transmitted light, 6x20

Recover

Item no.: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item Number: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item has been added to the configuration

Analyzer slider D/A with lambda-plate rotatable 360°

Recover

Item no.: 428102-0000-000

Analyzer slider D/A with lambda-plate rotatable 360°

Item Number: 428102-0000-000

Analyzer slider D/A with lambda-plate rotatable 360° position 1 with analyzer fixed and lambda plate 360° rotatable, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item has been added to the configuration

Analyzer module DIC ACR P&C shift free for transmitted light

Recover

Item no.: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light

Item Number: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.

Item has been added to the configuration

Analyzer module DIC ACR P&C for transmitted light

Recover

Item no.: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light

Item Number: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light optimized for DIC in transmitted light, not suitable for polarization

Various PO accessories

Item has been added to the configuration

Pol adjusting aid

Recover

Item no.: 453679-0000-000

Pol adjusting aid

Item Number: 453679-0000-000

Pol adjusting aid

Item has been added to the configuration

Bertrand lens slider 12x46

Recover

Item no.: 453671-0000-000

Bertrand lens slider 12x46

Item Number: 453671-0000-000

Bertrand lens slider 12x46 with focusing Bertrand lens for phase contrast and conoscopy

Item has been added to the configuration

Quartz depolarizer with tube-lens for tubes Axioscope

Recover

Item no.: 428106-9010-000

Quartz depolarizer with tube-lens for tubes Axioscope

Item Number: 428106-9010-000

Quartz depolarizer with tube-lens for tubes Axioscope

Item has been added to the configuration

Quartz depolarizer with tube-lens for tubes Axio Scope.A1

Recover

Item no.: 428106-9000-000

Quartz depolarizer with tube-lens for tubes Axio Scope.A1

Item Number: 428106-9000-000

Quartz depolarizer with tube-lens for tubes Axio Scope.A1 in combination with intermediate plate for analyzer slider 12x46

Item has been added to the configuration

Analyzer slider D/A, 360° rotatable

Recover

Item no.: 428103-0000-000

Analyzer slider D/A, 360° rotatable

Item Number: 428103-0000-000

Analyzer slider D/A, 360° rotatable position 1 with analyzer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer slider D/A, fixed

Recover

Item no.: 428101-0000-000

Analyzer slider D/A, fixed

Item Number: 428101-0000-000

Analyzer slider D/A, fixed position 1 with analyzer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Bertrand system module Pol P&C with analyzer

Recover

Item no.: 424941-9040-000

Bertrand system module Pol P&C with analyzer

Item Number: 424941-9040-000

Bertrand system module Pol P&C with analyzer for objectives N-Achroplan 50x/0.8 Pol and EC Plan-Neofluar 40x/0.9 Pol

DIC slider PlasDIC

Item has been added to the configuration

PlasDIC slider for LD PN 63x/0.75 corr

Recover

Item no.: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item Number: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item has been added to the configuration

PlasDIC slider for LD PN 40x/0.60 corr

Recover

Item no.: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item Number: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item has been added to the configuration

PlasDIC slider for LD PN 20x/0.40 corr

Recover

Item no.: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item Number: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item has been added to the configuration

Slider PlasDIC for A-Plan 63x/0.8

Recover

Item no.: 426980-9070-000

Slider PlasDIC for A-Plan 63x/0.8

Item Number: 426980-9070-000

Slider PlasDIC for A-Plan 63x/0.8

Item has been added to the configuration

Slider PlasDIC for LD A-Plan 10x-63x

Recover

Item no.: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Item Number: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Item has been added to the configuration

Slider PlasDIC for A-Plan 40x/0.65

Recover

Item no.: 426980-9030-000

Slider PlasDIC for A-Plan 40x/0.65

Item Number: 426980-9030-000

Slider PlasDIC for A-Plan 40x/0.65

Item has been added to the configuration

Slider PlasDIC for A-Plan 10x/0.25

Recover

Item no.: 426980-9020-000

Slider PlasDIC for A-Plan 10x/0.25

Item Number: 426980-9020-000

Slider PlasDIC for A-Plan 10x/0.25

Item has been added to the configuration

Slider PlasDIC for A-Plan 20x/0.45

Recover

Item no.: 426980-9000-000

Slider PlasDIC for A-Plan 20x/0.45

Item Number: 426980-9000-000

Slider PlasDIC for A-Plan 20x/0.45

Polarizers A

Item has been added to the configuration

Polarizer slider A 6x30 mm, 90° rotatable

Recover

Item no.: 427710-9000-000

Polarizer slider A 6x30 mm, 90° rotatable

Item Number: 427710-9000-000

Polarizer slider A 6x30 mm, 90° rotatable usable with reflected-light illuminator HD DIC

DIC slider 50x for reflected light

Item has been added to the configuration

DIC slider EC EP 40x/0.6 Epi+

Recover

Item no.: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item Number: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item has been added to the configuration

DIC slider EC EP 50x/0.7 Epi+

Recover

Item no.: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item Number: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item has been added to the configuration

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Recover

Item no.: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item Number: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item has been added to the configuration

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Recover

Item no.: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Item Number: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

DIC slider 20x for reflected light

Item has been added to the configuration

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Recover

Item no.: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item Number: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item has been added to the configuration

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Recover

Item no.: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Item Number: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

DIC slider type III

Item has been added to the configuration

DIC slider N-Achroplan 63x/0.85 III

Recover

Item no.: 426968-9090-000

DIC slider N-Achroplan 63x/0.85 III

Item Number: 426968-9090-000

DIC slider N-Achroplan 63x/0.85 III

Item has been added to the configuration

DIC slider EC PN 40x/0.9 III

Recover

Item no.: 426968-9010-000

DIC slider EC PN 40x/0.9 III

Item Number: 426968-9010-000

DIC slider EC PN 40x/0.9 III

Item has been added to the configuration

DIC slider PA 150x/1.35 III

Recover

Item no.: 426968-9000-000

DIC slider PA 150x/1.35 III

Item Number: 426968-9000-000

DIC slider PA 150x/1.35 III

Item has been added to the configuration

DIC slider PA 40x/1.3 III

Recover

Item no.: 426965-0000-000

DIC slider PA 40x/1.3 III

Item Number: 426965-0000-000

DIC slider PA 40x/1.3 III

Item has been added to the configuration

DIC slider LCI PN 63x/1.30 III

Recover

Item no.: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item Number: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item has been added to the configuration

DIC slider PA 63x/1.40 III

Recover

Item no.: 426957-0000-000

DIC slider PA 63x/1.40 III

Item Number: 426957-0000-000

DIC slider PA 63x/1.40 III

Item has been added to the configuration

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Recover

Item no.: 426948-0000-000

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Item Number: 426948-0000-000

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Item has been added to the configuration

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Recover

Item no.: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item Number: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item has been added to the configuration

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Recover

Item no.: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item Number: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item has been added to the configuration

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Recover

Item no.: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Item Number: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Item has been added to the configuration

DIC slider Plan-Apochromat 100x/1.4 III

Recover

Item no.: 426941-9000-000

DIC slider Plan-Apochromat 100x/1.4 III

Item Number: 426941-9000-000

DIC slider Plan-Apochromat 100x/1.4 III

DIC slider type II

Item has been added to the configuration

DIC slider N-Achroplan 40x/0.65 II

Recover

Item no.: 426968-9070-000

DIC slider N-Achroplan 40x/0.65 II

Item Number: 426968-9070-000

DIC slider N-Achroplan 40x/0.65 II

Item has been added to the configuration

DIC slider N-Achroplan 20x/0.45 II

Recover

Item no.: 426968-9060-000

DIC slider N-Achroplan 20x/0.45 II

Item Number: 426968-9060-000

DIC slider N-Achroplan 20x/0.45 II

Item has been added to the configuration

DIC slider W N Achroplan 40x/0.75 II

Recover

Item no.: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II

Item Number: 426967-9050-000

DIC slider W N Achroplan 40x/0.75 II

Item has been added to the configuration

DIC slider LD PN 63x/0.75 II

Recover

Item no.: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item Number: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item has been added to the configuration

DIC slider LD PN 40x/0.60 II

Recover

Item no.: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item Number: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item has been added to the configuration

DIC slider LD PN 20x/0.40 II

Recover

Item no.: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item Number: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item has been added to the configuration

DIC slider PA 63x/1.4 HC II

Recover

Item no.: 426952-0000-000

DIC slider PA 63x/1.4 HC II

Item Number: 426952-0000-000

DIC slider PA 63x/1.4 HC II

Item has been added to the configuration

DIC slider Plan-Apochromat 100x/1.4 HC II

Recover

Item no.: 426949-9000-000

DIC slider Plan-Apochromat 100x/1.4 HC II

Item Number: 426949-9000-000

DIC slider Plan-Apochromat 100x/1.4 HC II

Item has been added to the configuration

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Recover

Item no.: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item Number: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item has been added to the configuration

DIC slider Plan-Apo 10x/0.45 II

Recover

Item no.: 000000-1045-073

DIC slider Plan-Apo 10x/0.45 II

Item Number: 000000-1045-073

DIC slider Plan-Apo 10x/0.45 II

DIC slider 100x for reflected light

Item has been added to the configuration

DIC slider EC EP 100x/0.8 Epi+

Recover

Item no.: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item Number: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item has been added to the configuration

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Recover

Item no.: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Item Number: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

DIC slider type 0

Item has been added to the configuration

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Recover

Item no.: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Item Number: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Various DIC accessories

Item has been added to the configuration

Slit-diaphragm 4.5mm for PlasDIC

Recover

Item no.: 426715-9010-000

Slit-diaphragm 4.5mm for PlasDIC

Item Number: 426715-9010-000

Slit-diaphragm 4.5mm for PlasDIC for integration into the modulator disk

Item has been added to the configuration

Slit-diaphragm 2mm for PlasDIC

Recover

Item no.: 426715-9000-000

Slit-diaphragm 2mm for PlasDIC

Item Number: 426715-9000-000

Slit-diaphragm 2mm for PlasDIC for integration into the modulator disk

C-DIC/TIC sliders and prisms

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Recover

Item no.: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Item Number: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Recover

Item no.: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Item Number: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism

Item has been added to the configuration

TIC slider 6x20

Recover

Item no.: 000000-1105-190

TIC slider 6x20

Item Number: 000000-1105-190

TIC slider 6x20 with rotary slide-in DIC prism for the measurement of step heights

Stages and accessories (43)

Motorized stages

Item has been added to the configuration

Mechanical stage 80x60 mot standard; CAN (D)

Recover

Item no.: 432039-9200-000

Mechanical stage 80x60 mot standard; CAN (D)

Item Number: 432039-9200-000

Mechanical stage 80x60 mot standard; CAN (D) for Axioscope 7 -Travel range: 80mm x 60mm - Max. velocity: 25mm/s - Smallest movement: 0.5um - Repeatability : # ±3um (bi-directional, measured according to ISO 230.2) - Accuracy (full range): # ±10um (measured according to ISO 230.2) - Max. payload: 1Kg

Item has been added to the configuration

Mechanical stage 75x50 mot standard; CAN (D)

Recover

Item no.: 432026-9000-000

Mechanical stage 75x50 mot standard; CAN (D)

Item Number: 432026-9000-000

Mechanical stage 75x50 mot standard; CAN (D) for Axio Scope, Axio Examiner, Axio Imager and SteREO - with hardcoat anodized surface - stepper motor drive with integrated controller - connection via CAN bus - stage plate 292 x 187 x 18 mm - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.5 µm - reproducibility: +/- 5 µm - absolute accuracy: +/- 30 µm - max sample weight: 1 kg - incl. CAN cable

Item has been added to the configuration

Mechanical Stage 75x50 mot; CAN (D)

Recover

Item no.: 432024-9903-000

Mechanical Stage 75x50 mot; CAN (D)

Item Number: 432024-9903-000

Mechanical Stage 75x50 mot; CAN (D) for Axio Imager and SteREO - hard coating, linear encoders - stepper motor drive with integrated controller - connection via CAN bus - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - max sample weight: 1 kg - incl. CAN cable

Specimen holders

Item has been added to the configuration

Specimen holder plate for slides

Recover

Item no.: 432333-9010-000

Specimen holder plate for slides

Item Number: 432333-9010-000

Specimen holder plate for slides suitable for transmitted and reflected light, permits fast shifting of the slide by hand on the specimen holder plate and fine positioning through x/y movement of the stage

Item has been added to the configuration

Specimen holder for two slides 76x26mm, spring lever left

Recover

Item no.: 432333-9002-000

Specimen holder for two slides 76x26mm, spring lever left

Item Number: 432333-9002-000

Specimen holder for two slides 76x26mm, spring lever left

Item has been added to the configuration

Specimen holder for one slide 76x26mm, spring lever left

Recover

Item no.: 432323-9002-000

Specimen holder for one slide 76x26mm, spring lever left

Item Number: 432323-9002-000

Specimen holder for one slide 76x26mm, spring lever left

Item has been added to the configuration

Stage insert 160x116mm with holder for 4" wafer, rotatable (D)

Recover

Item no.: 432322-9010-000

Stage insert 160x116mm with holder for 4" wafer, rotatable (D)

Item Number: 432322-9010-000

Stage insert 160x116mm with holder for 4" wafer, rotatable (D) for mechanical stages 105x105/85mm

Item has been added to the configuration

Mounting frame for steel specimen (D)

Recover

Item no.: 432322-9000-000

Mounting frame for steel specimen (D)

Item Number: 432322-9000-000

Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm

Item has been added to the configuration

Mounting frame for one holder TCA (D)

Recover

Item no.: 432321-9902-000

Mounting frame for one holder TCA (D)

Item Number: 432321-9902-000

Mounting frame for one holder TCA (D) The mounting frame is accessory for technical cleanliness and applicable for: - holder TCA for filter membranes with diameter 47 mm; - holder TCA for filter membranes with diameter 50 mm; - holder TCA for the test standard.

Item has been added to the configuration

Holder TCA for filter membrane, DM 50 (D)

Recover

Item no.: 432321-9110-000

Holder TCA for filter membrane, DM 50 (D)

Item Number: 432321-9110-000

Holder TCA for filter membrane, DM 50 (D) Holder for filter membrane, diameter 50 mm. Accessory for analysis of particulate contamination on filter membranes.

Item has been added to the configuration

Holder TCA for test standard (D)

Recover

Item no.: 432321-9100-000

Holder TCA for test standard (D)

Item Number: 432321-9100-000

Holder TCA for test standard (D) Holder for test standard with geometric reference objects for testing of microscope systems for technical cleanliness.

Item has been added to the configuration

Holder TCA for filter membrane, DM 47 (D)

Recover

Item no.: 432320-9902-000

Holder TCA for filter membrane, DM 47 (D)

Item Number: 432320-9902-000

Holder TCA for filter membrane, DM 47 (D) Holder for filter membrane, diameter 47 mm. Accessory for analysis of particulate contamination on filter membranes.

Item has been added to the configuration

Mounting frame for two slides 76x26 (D)

Recover

Item no.: 432318-9000-000

Mounting frame for two slides 76x26 (D)

Item Number: 432318-9000-000

Mounting frame for two slides 76x26 (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for Terasaki plate (D)

Recover

Item no.: 432317-0000-000

Mounting frame for Terasaki plate (D)

Item Number: 432317-0000-000

Mounting frame for Terasaki plate (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for multiwell plates or ELISPOT HTS (D)

Recover

Item no.: 432316-0000-000

Mounting frame for multiwell plates or ELISPOT HTS (D)

Item Number: 432316-0000-000

Mounting frame for multiwell plates or ELISPOT HTS (D) - frame size 160x116 - for plate footprint 127x86 mm

Item has been added to the configuration

Mounting frame for 1 Geo Slide 48x28 mm (D)

Recover

Item no.: 432315-9000-000

Mounting frame for 1 Geo Slide 48x28 mm (D)

Item Number: 432315-9000-000

Mounting frame for 1 Geo Slide 48x28 mm (D) - frame size 160x116 mm

Item has been added to the configuration

Mounting frame for slide 76x26 (D)

Recover

Item no.: 432315-0000-000

Mounting frame for slide 76x26 (D)

Item Number: 432315-0000-000

Mounting frame for slide 76x26 (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D)

Recover

Item no.: 432314-0000-000

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D)

Item Number: 432314-0000-000

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D) - frame size 160x116 - for plate footprint 105x71 mm

Item has been added to the configuration

Metal Insert Plate (D)

Recover

Item no.: 432313-0000-000

Metal Insert Plate (D)

Item Number: 432313-0000-000

Metal Insert Plate (D) plane plate, horizontally fine adjustable - frame size 160x116 - with grid lines

Item has been added to the configuration

Glass Insert Plate (D)

Recover

Item no.: 432312-0000-000

Glass Insert Plate (D)

Item Number: 432312-0000-000

Glass Insert Plate (D) - frame size 160x116

Item has been added to the configuration

Universal mounting frame for Petri dishes and slides

Recover

Item no.: 432311-9901-000

Universal mounting frame for Petri dishes and slides

Item Number: 432311-9901-000

Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner

Item has been added to the configuration

Adapter Plate for Mounting Frames (D)

Recover

Item no.: 432310-0000-000

Adapter Plate for Mounting Frames (D)

Item Number: 432310-0000-000

Adapter Plate for Mounting Frames (D) - adapter frame size 313x148 - for frames 160x116

Item has been added to the configuration

Specimen holder 76x26, one-hand operation for immersion

Recover

Item no.: 432308-0000-000

Specimen holder 76x26, one-hand operation for immersion

Item Number: 432308-0000-000

Specimen holder 76x26, one-hand operation for immersion (particularly for immersion objectives)

Item has been added to the configuration

Mounting frame for 7 Geo Slides (D)

Recover

Item no.: 432306-9000-000

Mounting frame for 7 Geo Slides (D)

Item Number: 432306-9000-000

Mounting frame for 7 Geo Slides (D) - suitable for 7 Geo slides within the following dimensions: 46...48mm x 26...28mm x 1.0...1.35mm - frame size 313 x 148mm

Item has been added to the configuration

Mounting frame for 8 slides 76x26 mm (D)

Recover

Item no.: 432306-0000-000

Mounting frame for 8 slides 76x26 mm (D)

Item Number: 432306-0000-000

Mounting frame for 8 slides 76x26 mm (D) - frame size 313x148

Item has been added to the configuration

Specimen holder, special, for 2 slides 76x26 mm

Recover

Item no.: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm

Item Number: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm particularly for use with immersion objectives

Item has been added to the configuration

Specimen holder, reflected light, for mechanical stage 75x50

Recover

Item no.: 432302-9000-000

Specimen holder, reflected light, for mechanical stage 75x50

Item Number: 432302-9000-000

Specimen holder, reflected light, for mechanical stage 75x50 plate dimension 120x107

Item has been added to the configuration

Specimen holder for slide 76x26 mm for one-hand operation

Recover

Item no.: 432301-0000-000

Specimen holder for slide 76x26 mm for one-hand operation

Item Number: 432301-0000-000

Specimen holder for slide 76x26 mm for one-hand operation

Object guides

Item has been added to the configuration

Attachable object guide Pol, 28x48 mm

Recover

Item no.: 453561-9901-000

Attachable object guide Pol, 28x48 mm

Item Number: 453561-9901-000

Attachable object guide Pol, 28x48 mm for rotary stage Pol Axioscope

Mechanical stages

Item has been added to the configuration

Mechanical stage 75x50 R for reflected light

Recover

Item no.: 453527-9903-000

Mechanical stage 75x50 R for reflected light

Item Number: 453527-9903-000

Mechanical stage 75x50 R for reflected light with hardcoat anodized surface - 290 x 165 mm stage plate, - coaxial drive right 75 mm, 15 mm adjustable in length, with adjustable torque. Suitable for the mounting of objects with a diameter of up to 4". Including 2 stage clamps for the attachment of flat objects.

Item has been added to the configuration

Mechanical stage 75x50 L ergon. drive, fixed position

Recover

Item no.: 432035-9140-000

Mechanical stage 75x50 L ergon. drive, fixed position

Item Number: 432035-9140-000

Mechanical stage 75x50 L ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, left drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position

Item has been added to the configuration

Mechanical stage 75x50 R with special surface, high load capacity

Recover

Item no.: 432035-9070-000

Mechanical stage 75x50 R with special surface, high load capacity

Item Number: 432035-9070-000

Mechanical stage 75x50 R with special surface, high load capacity 220 x 170 mm stage plate with bright, special hardcoat anodized surface for particularly severe stress, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting

Item has been added to the configuration

Mechanical stage 75x50 R ergon. drive, fixed position

Recover

Item no.: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position

Item Number: 432035-9011-000

Mechanical stage 75x50 R ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position

Item has been added to the configuration

Mechanical stage 75x50 R with hardcoat anodized surface

Recover

Item no.: 432035-9004-000

Mechanical stage 75x50 R with hardcoat anodized surface

Item Number: 432035-9004-000

Mechanical stage 75x50 R with hardcoat anodized surface - 220 x 150 mm stage plate - rackless X-guide positioned at bottom, hidden gear in Y-guide - right drive 135 mm (extendable by 15 mm), with friction setting

Item has been added to the configuration

Mechanical stage 75x50 R with hardcoat anodized surface

Recover

Item no.: 432035-9003-000

Mechanical stage 75x50 R with hardcoat anodized surface

Item Number: 432035-9003-000

Mechanical stage 75x50 R with hardcoat anodized surface 220 x 170 mm stage plate, rackless X-guide positioned at bottom, hidden gear in Y-guide, right drive 135 mm (extendable by 15 mm), with friction setting

Item has been added to the configuration

Mechanical stage, right transmitted/reflected light, 105x105/85mm (D)

Recover

Item no.: 432018-9020-000

Mechanical stage, right transmitted/reflected light, 105x105/85mm (D)

Item Number: 432018-9020-000

Mechanical stage, right transmitted/reflected light, 105x105/85mm (D) for Axio Imager and Axioscope Vario Manual 3-plate mechanical stage for the attachment of mounting frames 160x116mm. Coaxial drive extendable in two steps: 114mm +33 mm vertically adjustable, no tool required for friction setting, drive on the right

Various stage accessories

Item has been added to the configuration

Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Pol stages

Item has been added to the configuration

Rotary stage Pol, 360° with 45° clickstops

Recover

Item no.: 432035-9131-000

Rotary stage Pol, 360° with 45° clickstops

Item Number: 432035-9131-000

Rotary stage Pol, 360° with 45° clickstops

Coded stages

Item has been added to the configuration

Display unit Profiler SCD (D)

Recover

Item no.: 432035-9111-000

Display unit Profiler SCD (D)

Item Number: 432035-9111-000

Display unit Profiler SCD (D) Touch display for up to three linear coordinates. Resolution: 1µm, Interface: RS232 interface incl. RS232 cable, encoder cable 2 m and power supply 100...240V/47...63Hz 24V / 30W with country specific plug (EU/GB/USA/AUS)

Item has been added to the configuration

Mechanical stage 75x50 R; SCD (D)

Recover

Item no.: 432018-9002-000

Mechanical stage 75x50 R; SCD (D)

Item Number: 432018-9002-000

Mechanical stage 75x50 R; SCD (D) for Axioscope, Axio Examiner and Axio Imager with hardcoat anodized surface - 240 x 170 x 18 mm stage plate - coaxial drive right 160 mm, extendable in length by 15 mm, continuous friction setting - resolution: 1 µm - absolute accuracy: +/- 5 µm - reproducibility: +/- 1 µm

Rotary mechanical stages

Item has been added to the configuration

Mechanical stage 75x50/240° R with hardcoat anodized surface

Recover

Item no.: 432035-9051-000

Mechanical stage 75x50/240° R with hardcoat anodized surface

Item Number: 432035-9051-000

Mechanical stage 75x50/240° R with hardcoat anodized surface coaxial drive 160 mm, extendable in length by 15 mm, with friction setting

Scanning stages

Item has been added to the configuration

Scanning Stage 225x85; PIEZO (D)

Recover

Item no.: 432023-9902-000

Scanning Stage 225x85; PIEZO (D)

Item Number: 432023-9902-000

Scanning Stage 225x85; PIEZO (D) for Axio Imager and SteREO - with linear encoders and piezo drive - travel range 225 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 0.6 µm - absolute accuracy: +/- 3 µm - for mounting frames 313 x 148

Item has been added to the configuration

Scanning Stage 130x85 PIEZO (D)

Recover

Item no.: 432022-9903-000

Scanning Stage 130x85 PIEZO (D)

Item Number: 432022-9903-000

Scanning Stage 130x85 PIEZO (D) for Axio Imager - with linear encoders and piezo drive - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 0.6 µm - absolute accuracy: +/- 3 µm - travel range adjustable - for mounting frames 160 x 116 mm and Z-PIEZO

Tubes and accessories (25)

Binocular phototubes

Item has been added to the configuration

Binocular phototube 30°/23 (98:2), reversed image

Recover

Item no.: 425520-9160-000

Binocular phototube 30°/23 (98:2), reversed image

Item Number: 425520-9160-000

Binocular phototube 30°/23 (98:2), reversed image - with 30° fixed angle, field of view 23mm - split ratio between camera and eyepieces is 98:2 - camera port with interface 60N - suitable for Fast Panorama or other scanning applications

Item has been added to the configuration

Binocular phototube 30°/23 (100:0/30:70/0:100), reversed image

Recover

Item no.: 425520-9130-000

Binocular phototube 30°/23 (100:0/30:70/0:100), reversed image

Item Number: 425520-9130-000

Binocular phototube 30°/23 (100:0/30:70/0:100), reversed image - with 30° fixed angle, field of view 23mm - split ratio between camera and eyepieces can be 100:0, 70:30 or 0:100 - camera port with interface 60N

Item has been added to the configuration

Binocular phototube Pol 20°/23 (100:0/0:100), upright image

Recover

Item no.: 425520-9100-000

Binocular phototube Pol 20°/23 (100:0/0:100), upright image

Item Number: 425520-9100-000

Binocular phototube Pol 20°/23 (100:0/0:100), upright image with sliding prism and upright reticle, upright and unreversed image, camera port with interface 60N

Item has been added to the configuration

Binocular phototube 30°/23 (50:50), reversed image

Recover

Item no.: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image

Item Number: 425520-9010-000

Binocular phototube 30°/23 (50:50), reversed image camera port with interface 60N

Item has been added to the configuration

Binocular phototube 15°/25 (100:0/0:100), upright image

Recover

Item no.: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image

Item Number: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image adjustable stop, camera port with interface 60N

Item has been added to the configuration

Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image

Recover

Item no.: 425502-0000-000

Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image

Item Number: 425502-0000-000

Binocular phototube 30°/25 (100:0/30:70/0:100), reversed image camera port with interface 60N

Item has been added to the configuration

Binocular phototube 30°/25 (30vis:70doc), reversed image

Recover

Item no.: 425501-0000-000

Binocular phototube 30°/25 (30vis:70doc), reversed image

Item Number: 425501-0000-000

Binocular phototube 30°/25 (30vis:70doc), reversed image camera port with interface 60N

Various tube accessories

Item has been added to the configuration

Module 5.0x for magnification changer

Recover

Item no.: 426137-9050-000

Module 5.0x for magnification changer

Item Number: 426137-9050-000

Module 5.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 4.0x for magnification changer

Recover

Item no.: 426137-9040-000

Module 4.0x for magnification changer

Item Number: 426137-9040-000

Module 4.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 2.5x for magnification changer

Recover

Item no.: 426137-9030-000

Module 2.5x for magnification changer

Item Number: 426137-9030-000

Module 2.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 1.6x for magnification changer

Recover

Item no.: 426137-9020-000

Module 1.6x for magnification changer

Item Number: 426137-9020-000

Module 1.6x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 0.5x for magnification changer

Recover

Item no.: 426137-9010-000

Module 0.5x for magnification changer

Item Number: 426137-9010-000

Module 0.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Magnification changer 4x, switchable 60N-60N

Recover

Item no.: 426137-9000-000

Magnification changer 4x, switchable 60N-60N

Item Number: 426137-9000-000

Magnification changer 4x, switchable 60N-60N for connection to 60N camera port, 4 switchable positions, adjustable stop, factor 1x already integrated, 3 empty positions for optional magnification modules

Binocular ergotubes

Item has been added to the configuration

Comfortable binocular Ergotube 8-33°/22, 50mm high, reversed image

Recover

Item no.: 425522-9040-000

Comfortable binocular Ergotube 8-33°/22, 50mm high, reversed image

Item Number: 425522-9040-000

Comfortable binocular Ergotube 8-33°/22, 50mm high, reversed image variable, continuous angle adjustment 8-33° and vertical adjustment 50 mm, including base plate for microscope stand

Item has been added to the configuration

Comfortable binocular Ergophototube 15°/23 (50:50)

Recover

Item no.: 425520-9050-000

Comfortable binocular Ergophototube 15°/23 (50:50)

Item Number: 425520-9050-000

Comfortable binocular Ergophototube 15°/23 (50:50) vertically adjustable and extendable, upright image. Variable, continuous horizontal and vertical adjustment of the binocular component (50 mm each), camera port with interface 60N

Item has been added to the configuration

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image

Recover

Item no.: 425520-9040-000

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image

Item Number: 425520-9040-000

Binocular Ergophototube 5-30°/23 (100:0/0:100), upright image with prism switch, camera port with interface 60N

Binocular ergo photoubes

Item has been added to the configuration

Binocular ergophototube -2° to 28°/23 (50:50), reversed image

Recover

Item no.: 425520-9150-000

Binocular ergophototube -2° to 28°/23 (50:50), reversed image

Item Number: 425520-9150-000

Binocular ergophototube -2° to 28°/23 (50:50), reversed image - with tiltable range from -2° to 28°, field of view 23mm - split ratio between camera and eyepieces is 50:50 - camera port with interface 60N - non-compatible with multidiscussion equipment

Item has been added to the configuration

Binocular ergophototube -2° to 28°/25 (50:50), reversed image

Recover

Item no.: 425520-9140-000

Binocular ergophototube -2° to 28°/25 (50:50), reversed image

Item Number: 425520-9140-000

Binocular ergophototube -2° to 28°/25 (50:50), reversed image - with tiltable angle from -2° to 28°, field of view 25mm - split ratio between camera and eyepieces is 50:50 - camera port with interface 60N - additionally compatible with multidiscussion and co-observation setup (with FOV 23)

Item has been added to the configuration

Comfortable binocular Ergophototube 15°/23 (50:50), upright image

Recover

Item no.: 425515-0000-000

Comfortable binocular Ergophototube 15°/23 (50:50), upright image

Item Number: 425515-0000-000

Comfortable binocular Ergophototube 15°/23 (50:50), upright image variable, continuous horizontal and vertical adjustment of the binocular component, camera port with interface 60N

Item has been added to the configuration

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image

Recover

Item no.: 425514-0000-000

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image

Item Number: 425514-0000-000

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image variable, continuous vertical adjustment 44 mm, camera port with interface 60N

Item has been added to the configuration

Binocular Ergophototube 20°/23 (100:0/0:100), reversed image

Recover

Item no.: 425512-0000-000

Binocular Ergophototube 20°/23 (100:0/0:100), reversed image

Item Number: 425512-0000-000

Binocular Ergophototube 20°/23 (100:0/0:100), reversed image variable, continuous vertical adjustment 44 mm, camera port with interface 60N

Binocular tubes

Item has been added to the configuration

Binocular tube 20°/23, upright image

Recover

Item no.: 425520-9090-000

Binocular tube 20°/23, upright image

Item Number: 425520-9090-000

Binocular tube 20°/23, upright image

Item has been added to the configuration

Binocular phototube 20°/23 (100:0/0:100), upright image

Recover

Item no.: 425520-9030-000

Binocular phototube 20°/23 (100:0/0:100), upright image

Item Number: 425520-9030-000

Binocular phototube 20°/23 (100:0/0:100), upright image with sliding prism, camera port with interface 60N

Item has been added to the configuration

Binocular phototube 30°/23 (100:0/0:100), reversed image

Recover

Item no.: 425520-9020-000

Binocular phototube 30°/23 (100:0/0:100), reversed image

Item Number: 425520-9020-000

Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N

Item has been added to the configuration

Binocular tube 30°/23, reversed image

Recover

Item no.: 425520-9000-000

Binocular tube 30°/23, reversed image

Item Number: 425520-9000-000

Binocular tube 30°/23, reversed image

Intermediate tubes (3)

Intermediate tube

Item has been added to the configuration

Adjustable supporting element for dual observation unit

Recover

Item no.: 425145-9180-000

Adjustable supporting element for dual observation unit

Item Number: 425145-9180-000

Adjustable supporting element for dual observation unit - mandatory for Axiolab 5 and Axioscope 5/7 with dual observation unit

Item has been added to the configuration

Dual observation unit

Recover

Item no.: 425145-9080-000

Dual observation unit

Item Number: 425145-9080-000

Dual observation unit - for two observers sitting in opposite or side-by-side position - field of view 23mm - compatible with Axioscope 5/7, Axio Scope.A1 and Axiolab 5 - with 4 color (blue, green, red and white) LED light pointer in field of view and power unit

Item has been added to the configuration

Center component for multidiscussion, for tube carrier left and right

Recover

Item no.: 425145-9000-000

Center component for multidiscussion, for tube carrier left and right

Item Number: 425145-9000-000

Center component for multidiscussion, for tube carrier left and right for Axioscope - dimmable LED pointer in 3 interchangable colors (red, green, white) - wide-range power unit for line voltages between 90 and 264V AC, with country-specific adapter - dust cover - suitable to field-of-view 23 mm

Optovar systems (8)

Magnification changer

Item has been added to the configuration

3-position tube-lens turret with tube-lens 1x

Recover

Item no.: 425313-9010-000

3-position tube-lens turret with tube-lens 1x

Item Number: 425313-9010-000

3-position tube-lens turret with tube-lens 1x tube lens 1x already integrated, 2 empty positions for optionally usable tube lenses with slot for use of analyzer sliders from the Axio Imager line

Optovar modules

Item has been added to the configuration

Tube-lens 4.0x for Axio Imager/Axiosope

Recover

Item no.: 425307-0000-000

Tube-lens 4.0x for Axio Imager/Axiosope

Item Number: 425307-0000-000

Tube-lens 4.0x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 2.5x for Axio Imager/Axioscope

Recover

Item no.: 425305-0000-000

Tube-lens 2.5x for Axio Imager/Axioscope

Item Number: 425305-0000-000

Tube-lens 2.5x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 1.6x for Axio Imager/Axioscope

Recover

Item no.: 425304-0000-000

Tube-lens 1.6x for Axio Imager/Axioscope

Item Number: 425304-0000-000

Tube-lens 1.6x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 1.25x for Axio Imager/Axioscope

Recover

Item no.: 425303-0000-000

Tube-lens 1.25x for Axio Imager/Axioscope

Item Number: 425303-0000-000

Tube-lens 1.25x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Optovar module 2.5x ACR P&C for transmitted light

Recover

Item no.: 424936-0000-000

Optovar module 2.5x ACR P&C for transmitted light

Item Number: 424936-0000-000

Optovar module 2.5x ACR P&C for transmitted light

Item has been added to the configuration

Optovar module 1.6x ACR P&C for transmitted light

Recover

Item no.: 424935-0000-000

Optovar module 1.6x ACR P&C for transmitted light

Item Number: 424935-0000-000

Optovar module 1.6x ACR P&C for transmitted light

Item has been added to the configuration

Optovar module 1.25x ACR P&C for transmitted light

Recover

Item no.: 424934-0000-000

Optovar module 1.25x ACR P&C for transmitted light

Item Number: 424934-0000-000

Optovar module 1.25x ACR P&C for transmitted light

Filters (99)

Fluorescence filter set pix

Item has been added to the configuration

Filter Set 121 mCherry

Recover

Item no.: 489121-9100-000

Filter Set 121 mCherry

Item Number: 489121-9100-000

Filter Set 121 mCherry Consisting of: EX BP 555/30 BS 583 EM BP 640/86. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 118 YFP

Recover

Item no.: 489118-9100-000

Filter Set 118 YFP

Item Number: 489118-9100-000

Filter Set 118 YFP Consisting of: EX BP 508/20 BS 525 EM BP 555/46. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 112 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489112-9110-400

Filter Set 112 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489112-9110-400

Filter Set 112 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 112 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 555, 630 and 735 nm. Consisting of filters PFT 405 + 493 + 575 + 654 + 761 and PBP 425/30 + 514/31 + 592/25 + 681/45 + 785/38 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter Set 110 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489110-9111-400

Filter Set 110 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489110-9111-400

Filter Set 110 HE LED with Reflector Module FL EC P <(>&<)> C (E) Filter Set 110 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 590 and 735 nm. Consisting of filters QFT 405 + 493 + 611 + 762 and QBP 425/30 + 524/51 + 634/38 + 785/38 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter Set 109 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489109-9110-400

Filter Set 109 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489109-9110-400

Filter Set 109 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 109 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475 and 555 nm. Consisting of filters TBS 405 + 493 + 575 and TBP 425/29 + 514/31 + 632/100 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter set 109 HE LED (E)

Recover

Item no.: 489109-9110-000

Filter set 109 HE LED (E)

Item Number: 489109-9110-000

Filter set 109 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, FITC and TRITC/Cy3 with excitation wavelengths 385, 475 and 555 nm. Contains beam splitter TBS 405 + 493 + 575 and emission filter TBP 425/29 + 514/31 + 632/100.

Item has been added to the configuration

Filter Set 108 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489108-9110-400

Filter Set 108 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489108-9110-400

Filter Set 108 HE LED with Reflector Module FL EC P&C (E) Filter Set 108 HE LED shift free for use with Colibri 7 with excitation wavelengths 425 and 510 nm. Consisting of filters DFT 450 + 538 and DBP 467/24 + 598/110 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 96 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489096-9100-400

Filter Set 96 HE with Reflector Module FL EC P&C (E)

Item Number: 489096-9100-400

Filter Set 96 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 96 HE shift free consisting of filters EX BP 390/40, BS FT 420, EM BP 450/40 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 96 HE BFP shift free (E)

Recover

Item no.: 489096-9100-000

Filter Set 96 HE BFP shift free (E)

Item Number: 489096-9100-000

Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 92 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489092-9110-400

Filter Set 92 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489092-9110-400

Filter Set 92 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 92 HE LED shift free for use ZEISS LED fluorescence light sources with excitation wavelengths 385, 475 and 590 nm. Consisting of filters TFT 405 + 493 + 610 and TBP 425/30 + 524/50 + 688/145 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter Set 91 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489091-9110-400

Filter Set 91 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489091-9110-400

Filter Set 91 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 91 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 430, 508 and 590 nm. Consisting of filters TFT 450 + 538 + 610 and TBP 467/24 + 555/25 + 687/145 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter Set 90 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489090-9110-400

Filter Set 90 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489090-9110-400

Filter Set 90 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 555 and 630 nm. Consisting of filters QBS 405 + 493 + 575 + 653 and QBP 425/30 + 514/30 + 592/25 + 709/100 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter set 90 HE LED (E)

Recover

Item no.: 489090-9110-000

Filter set 90 HE LED (E)

Item Number: 489090-9110-000

Filter set 90 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.

Item has been added to the configuration

Filter Set 90 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489090-9100-400

Filter Set 90 HE with Reflector Module FL EC P&C (E)

Item Number: 489090-9100-400

Filter Set 90 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE shift free for excitation with multi spectral light sources. Consisting of EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100. BS and EM inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Recover

Item no.: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Item Number: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E) for excitation with multi spectral light sources. Consisting of: EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E)

Recover

Item no.: 489077-0000-000

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E)

Item Number: 489077-0000-000

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E) EX TBP 483+564+642; BS TFT 506+582+659; EM TBP 526+601+688

Item has been added to the configuration

Filter set 74 HE GFP+mRFP shift free (E)

Recover

Item no.: 489074-0000-000

Filter set 74 HE GFP+mRFP shift free (E)

Item Number: 489074-0000-000

Filter set 74 HE GFP+mRFP shift free (E) EX DBP 480/30+565/25; BS DFT 505+583; EM DBP 525/31+616/57

Item has been added to the configuration

Filter Set 70 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489070-0000-400

Filter Set 70 HE with Reflector Module FL EC P&C (E)

Item Number: 489070-0000-400

Filter Set 70 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 70 HE shift free consisting of filters EX BP 430/60, BS FT 500, EM BP 550/100 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 70 HE Alexa 430 shift free (E)

Recover

Item no.: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E)

Item Number: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E) EX BP 430/60, BS FT 500, EM BP 550/100, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 64 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489064-0000-400

Filter Set 64 HE with Reflector Module FL EC P&C (E)

Item Number: 489064-0000-400

Filter Set 64 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 64 HE shift free consisting of filters EX BP 587/25, BS FT 605, EM BP 647/70 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 64 HE mPlum shift free (E)

Recover

Item no.: 489064-0000-000

Filter set 64 HE mPlum shift free (E)

Item Number: 489064-0000-000

Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 63 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489063-0000-400

Filter Set 63 HE with Reflector Module FL EC P&C (E)

Item Number: 489063-0000-400

Filter Set 63 HE with Reflector Module FL EC P&C (E) Filter Set 63 HE shift free consisting of filters EX BP 572/25, BS FT 590, EM BP 629/62 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 63 HE mRFP shift free (E)

Recover

Item no.: 489063-0000-000

Filter set 63 HE mRFP shift free (E)

Item Number: 489063-0000-000

Filter set 63 HE mRFP shift free (E) EX BP 572/25, BS FT 590, EM BP 629/62

Item has been added to the configuration

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Recover

Item no.: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Item Number: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E) optimized for use with the illumination system Colibri EX BP 370/40 o. BP 474/28 o. BP 585/35 BS TFT 395+495+610 EM DBP 425/46+527/54+LP 615

Item has been added to the configuration

Filter Set 56 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489056-9110-400

Filter Set 56 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489056-9110-400

Filter Set 56 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 56 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 475 and 555 nm. Consisting of filters DFT 490 + 575 and DBP 512/30 + 630/98 inserted in reflector module, reflection avoided through tilted mount for emission filters.

Item has been added to the configuration

Filter set 56 HE LED (E)

Recover

Item no.: 489056-9110-000

Filter set 56 HE LED (E)

Item Number: 489056-9110-000

Filter set 56 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.

Item has been added to the configuration

Filter set 56 HE GFP + DsRed shift free (E)

Recover

Item no.: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E)

Item Number: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E) EX (GFP) BP 470/27, EX (DsRed) BP 556/25, BS DFT 490+575, EM DBP 512/30+630/98

Item has been added to the configuration

Filter Set 47 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489047-9901-400

Filter Set 47 HE with Reflector Module FL EC P&C (E)

Item Number: 489047-9901-400

Filter Set 47 HE with Reflector Module FL EC P&C (E) Filter Set 47 HE shift free consisting of filters EX BP 436/25, BS FT 455, EM BP 480/40 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 47 HE CFP shift free (E)

Recover

Item no.: 489047-9901-000

Filter set 47 HE CFP shift free (E)

Item Number: 489047-9901-000

Filter set 47 HE CFP shift free (E) EX BP 436/25, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter Set 46 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489046-9901-400

Filter Set 46 HE with Reflector Module FL EC P&C (E)

Item Number: 489046-9901-400

Filter Set 46 HE with Reflector Module FL EC P&C (E) Filter Set 46 HE shift free consisting of filters EX BP 500/25, BS FT 515, EM BP 535/30 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 46 HE YFP shift free (E)

Recover

Item no.: 489046-9901-000

Filter set 46 HE YFP shift free (E)

Item Number: 489046-9901-000

Filter set 46 HE YFP shift free (E) EX BP 500/25, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter Set 43 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489043-9901-400

Filter Set 43 HE with Reflector Module FL EC P&C (E)

Item Number: 489043-9901-400

Filter Set 43 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 43 HE shift free consisting of filters EX BP 550/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 43 HE Cy 3 shift free (E)

Recover

Item no.: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E)

Item Number: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 38 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489038-9901-400

Filter Set 38 HE with Reflector Module FL EC P&C (E)

Item Number: 489038-9901-400

Filter Set 38 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 38 HE shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 38 HE eGFP shift free (E)

Recover

Item no.: 489038-9901-000

Filter set 38 HE eGFP shift free (E)

Item Number: 489038-9901-000

Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 25 HE shift free (E)

Recover

Item no.: 489025-0000-000

Filter set 25 HE shift free (E)

Item Number: 489025-0000-000

Filter set 25 HE shift free (E) EX TBP 405+495+575, BS TFT 435+510+600, EM TBP 460+530+625

Item has been added to the configuration

Filter set 21 HE Fura 2 shift free (E)

Recover

Item no.: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E)

Item Number: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E) EX BP 340/30, EX BP 387/15, BS FT 409, EM BP 510/90, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 20 HE Rhodamin shift free (E)

Recover

Item no.: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E)

Item Number: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E) EX BP 546/12, BS FT 560, EM BP 607/80

Item has been added to the configuration

Filter Set 106 (E)

Recover

Item no.: 488106-9100-000

Filter Set 106 (E)

Item Number: 488106-9100-000

Filter Set 106 (E) EX BP 420/40, BS FT 465, EM LP 470/00 Filter set for fluorometric quantification of rock samples.

Item has been added to the configuration

Filter set 95 eGFP+mCherry shift free (E)

Recover

Item no.: 488095-9100-000

Filter set 95 eGFP+mCherry shift free (E)

Item Number: 488095-9100-000

Filter set 95 eGFP+mCherry shift free (E) EX DBP 475/20+583/25, DBS FT 495+600, EM DBP 518/25+625/30

Item has been added to the configuration

Filter Set 71 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488071-0000-400

Filter Set 71 with Reflector Module FL EC P&C (E)

Item Number: 488071-0000-400

Filter Set 71 with Reflector Module FL EC P&C (E) Filter Set 71 shift free consisting of filters EX BP 592/24, BS FT 615, EM BP 675/100 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filterset 71 shift free (E)

Recover

Item no.: 488071-0000-000

Filterset 71 shift free (E)

Item Number: 488071-0000-000

Filterset 71 shift free (E) EX BP 592/24, BS FT 615, EM BP 675/100

Item has been added to the configuration

Filter Set 50 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488050-9901-400

Filter Set 50 with Reflector Module FL EC P&C (E)

Item Number: 488050-9901-400

Filter Set 50 with Reflector Module FL EC P&C (E) Filter Set 50 shift free consisting of filters EX BP 640/30, BS FT 660, EM BP 690/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 50 Cy 5 shift free (E)

Recover

Item no.: 488050-9901-000

Filter set 50 Cy 5 shift free (E)

Item Number: 488050-9901-000

Filter set 50 Cy 5 shift free (E) EX BP 640/30, BS FT 660, EM BP 690/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter Set 49 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488049-9901-400

Filter Set 49 with Reflector Module FL EC P&C (E)

Item Number: 488049-9901-400

Filter Set 49 with Reflector Module FL EC P&C (E) Filter Set 49 shift free consisting of filters EX G 365, BS FT 395, EM BP 445/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 49 DAPI shift free (E)

Recover

Item no.: 488049-9901-000

Filter set 49 DAPI shift free (E)

Item Number: 488049-9901-000

Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50

Item has been added to the configuration

Filter Set 47 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488047-9100-400

Filter Set 47 with Reflector Module FL EC P&C (E)

Item Number: 488047-9100-400

Filter Set 47 with Reflector Module FL EC P&C (E) Filter Set 47 shift free consisting of filters EX BP 436/20, BS FT 455, EM BP 480/40 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 45 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488045-9100-400

Filter Set 45 with Reflector Module FL EC P&C (E)

Item Number: 488045-9100-400

Filter Set 45 with Reflector Module FL EC P&C (E) Filter Set 45 shift free consisting of filters EX BP 560/40, BS FT 585, EM BP 630/75 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 44 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488044-9100-400

Filter Set 44 with Reflector Module FL EC P&C (E)

Item Number: 488044-9100-400

Filter Set 44 with Reflector Module FL EC P&C (E) Filter Set 44 shift free consisting of filters EX BP 475/40, BS FT 500, EM BP 530/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 43 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488043-9100-400

Filter Set 43 with Reflector Module FL EC P&C (E)

Item Number: 488043-9100-400

Filter Set 43 with Reflector Module FL EC P&C (E) Filter Set 43 shift free consisting of filters EX BP 545/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 38 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488038-9100-400

Filter Set 38 with Reflector Module FL EC P&C (E)

Item Number: 488038-9100-400

Filter Set 38 with Reflector Module FL EC P&C (E) Filter Set 38 shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 31 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488031-9100-400

Filter Set 31 with Reflector Module FL EC P&C (E)

Item Number: 488031-9100-400

Filter Set 31 with Reflector Module FL EC P&C (E) Filter Set 31 shift free consisting of filters EX BP 565/30, BS FT 585, EM BP 620/60 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 25 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488025-0000-400

Filter Set 25 with Reflector Module FL EC P&C (F)

Item Number: 488025-0000-400

Filter Set 25 with Reflector Module FL EC P&C (F) Filter Set 25 shift free consisting of filters EX TBP 400+495+570, BS FT 410+505+585, EM TBP 460+530+625 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Recover

Item no.: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Item Number: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F) EX TBP 400+495+570, BS FT 410+505+585, EM TBP 460+530+625

Item has been added to the configuration

Filter Set 20 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488020-9901-400

Filter Set 20 with Reflector Module FL EC P&C (F)

Item Number: 488020-9901-400

Filter Set 20 with Reflector Module FL EC P&C (F) Filter Set 20 shift free consisting of filters EX BP 546/12, BS FT 560, EM BP 608/65 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 20 Rhodamin shift free (F)

Recover

Item no.: 488020-9901-000

Filter set 20 Rhodamin shift free (F)

Item Number: 488020-9901-000

Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640

Item has been added to the configuration

Filter Set 15 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488015-0000-400

Filter Set 15 with Reflector Module FL EC P&C (F)

Item Number: 488015-0000-400

Filter Set 15 with Reflector Module FL EC P&C (F) Filter Set 15 shift free consisting of filters EX BP 546/12, BS FT 580, EM LP 590 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 15 shift free (F)

Recover

Item no.: 488015-0000-000

Filter set 15 shift free (F)

Item Number: 488015-0000-000

Filter set 15 shift free (F) EX BP 546/12, BS FT 580, EM LP 590

Item has been added to the configuration

Filter Set 14 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488014-0000-400

Filter Set 14 with Reflector Module FL EC P&C (F)

Item Number: 488014-0000-400

Filter Set 14 with Reflector Module FL EC P&C (F) Filter Set 14 shift free consisting of filters EX BP 535/50, BS FT 580, EM LP 590 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 14 shift free (F)

Recover

Item no.: 488014-0000-000

Filter set 14 shift free (F)

Item Number: 488014-0000-000

Filter set 14 shift free (F) EX BP 510-560, BS FT 580, EM LP 590

Item has been added to the configuration

Filter Set 10 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488010-9901-400

Filter Set 10 with Reflector Module FL EC P&C (F)

Item Number: 488010-9901-400

Filter Set 10 with Reflector Module FL EC P&C (F) Filter Set 10 shift free consisting of filters EX BP 470/40, BS FT 510, EM BP 540/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 10 shift free (F)

Recover

Item no.: 488010-9901-000

Filter set 10 shift free (F)

Item Number: 488010-9901-000

Filter set 10 shift free (F) EX BP 450-490, BS FT 510, EM BP 515-565

Item has been added to the configuration

Filter Set 09 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488009-9901-400

Filter Set 09 with Reflector Module FL EC P&C (F)

Item Number: 488009-9901-400

Filter Set 09 with Reflector Module FL EC P&C (F) Filter Set 09 shift free consisting of filters EX BP 470/40, BS FT 510, EM LP 515 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 09 shift free (F)

Recover

Item no.: 488009-9901-000

Filter set 09 shift free (F)

Item Number: 488009-9901-000

Filter set 09 shift free (F) EX BP 450-490, BS FT 510, EM LP 515

Item has been added to the configuration

Filter Set 02 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488002-9901-400

Filter Set 02 with Reflector Module FL EC P&C (F)

Item Number: 488002-9901-400

Filter Set 02 with Reflector Module FL EC P&C (F) Filter Set 02 shift free consisting of filters EX G 365, BS FT 395, EM LP 420 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 02 shift free (F)

Recover

Item no.: 488002-9901-000

Filter set 02 shift free (F)

Item Number: 488002-9901-000

Filter set 02 shift free (F) EX G 365, BS FT 395, EM LP 420

Item has been added to the configuration

Filter Set 01 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488001-9901-400

Filter Set 01 with Reflector Module FL EC P&C (F)

Item Number: 488001-9901-400

Filter Set 01 with Reflector Module FL EC P&C (F) Filter Set 01 shift free consisting of filters EX BP 365/12, BS FT 395, EM LP 397 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter set 01 shift free (F)

Recover

Item no.: 488001-9901-000

Filter set 01 shift free (F)

Item Number: 488001-9901-000

Filter set 01 shift free (F) EX BP 365/12, BS FT 395, EM LP 397

Item has been added to the configuration

Filter set 00 shift free (F)

Recover

Item no.: 488000-0000-000

Filter set 00 shift free (F)

Item Number: 488000-0000-000

Filter set 00 shift free (F) EX BP 530-585, BS FT 600, EM LP 615

Item has been added to the configuration

Filter set 48 FRET CFP/YFP shift free (E)

Recover

Item no.: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E)

Item Number: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E) EX BP 436/20, BS FT 455, EM BP 535/30

Item has been added to the configuration

Filter set 47 CFP shift free (E)

Recover

Item no.: 000000-1196-682

Filter set 47 CFP shift free (E)

Item Number: 000000-1196-682

Filter set 47 CFP shift free (E) EX BP 436/20, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter set 46 YFP shift free (E)

Recover

Item no.: 000000-1196-681

Filter set 46 YFP shift free (E)

Item Number: 000000-1196-681

Filter set 46 YFP shift free (E) EX BP 500/20, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter set 45 HQ TexasRed, d=25 shift free (E)

Recover

Item no.: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E)

Item Number: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E) EX BP 560/40, BS FT 585, EM BP 630/75, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 44 FITC special, d=25 shift free (E)

Recover

Item no.: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E)

Item Number: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E) EX BP 475/40, BS FT 500, EM BP 530/50

Item has been added to the configuration

Filter set 43 Cy 3, d=25 shift free (E)

Recover

Item no.: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E)

Item Number: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E) EX BP 545/25, BS FT 570, EM BP 605/70, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Item has been added to the configuration

Filter set 31 Cy 3.5 shift free (E)

Recover

Item no.: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E)

Item Number: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E) EX BP 565/30, BS FT 585, EM BP 620/60

Item has been added to the configuration

Filter set 38 Endow GFP shift free (E)

Recover

Item no.: 000000-1031-346

Filter set 38 Endow GFP shift free (E)

Item Number: 000000-1031-346

Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50, recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources.

Fluorescence filter set

Item has been added to the configuration

Filter set 52 HE (488nm) shift free (E)

Recover

Item no.: 489052-0000-000

Filter set 52 HE (488nm) shift free (E)

Item Number: 489052-0000-000

Filter set 52 HE (488nm) shift free (E) EX BP 488/20, BS FT 505, EM BP 530/50

Item has been added to the configuration

Filter set D

Recover

Item no.: 000000-1058-230

Filter set D

Item Number: 000000-1058-230

Filter set D containing 3 grey filters 0.015/0.06/0.25, d=36 mm

Neutral density filter

Item has been added to the configuration

Neutral-density filter 0.25; d=32x2

Recover

Item no.: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item Number: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item has been added to the configuration

Neutral-density filter 0.06, d=32x2

Recover

Item no.: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item Number: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item has been added to the configuration

Neutral density filter 0.25 mounted for co-observer

Recover

Item no.: 425145-9100-000

Neutral density filter 0.25 mounted for co-observer

Item Number: 425145-9100-000

Neutral density filter 0.25 mounted for co-observer For insertion into tube carrier for co-observer. Filter is used to balance the brightness between the main and co-observers of the multi- discussion equipment.

Item has been added to the configuration

Neutral density filter 0.5 mounted for co-observer

Recover

Item no.: 425145-9090-000

Neutral density filter 0.5 mounted for co-observer

Item Number: 425145-9090-000

Neutral density filter 0.5 mounted for co-observer For insertion into tube carrier for co-observer. Filter is used to balance the brightness between the main and co-observers of the multi- discussion equipment.

Heat-reflecting filter

Item has been added to the configuration

Heat protection filter KG 1, d=32x2

Recover

Item no.: 467830-0000-000

Heat protection filter KG 1, d=32x2

Item Number: 467830-0000-000

Heat protection filter KG 1, d=32x2

Interference filter

Item has been added to the configuration

Interference wide-band filter green, d=32x4

Recover

Item no.: 467803-0000-000

Interference wide-band filter green, d=32x4

Item Number: 467803-0000-000

Interference wide-band filter green, d=32x4

Item has been added to the configuration

IF green filter, d=25x4

Recover

Item no.: 447805-9901-000

IF green filter, d=25x4

Item Number: 447805-9901-000

IF green filter, d=25x4

Gray filter

Item has been added to the configuration

Neutral Density Filter 0.25 D=25x2 Module

Recover

Item no.: 447836-9500-000

Neutral Density Filter 0.25 D=25x2 Module

Item Number: 447836-9500-000

Neutral Density Filter 0.25 D=25x2 Module Consisting of: Grey filter 0.25, d=25x2

Item has been added to the configuration

Grey filter 0.25, d=25x2

Recover

Item no.: 447836-0000-000

Grey filter 0.25, d=25x2

Item Number: 447836-0000-000

Grey filter 0.25, d=25x2

Item has been added to the configuration

Neutral Density Filter 0.06 D=25x2 Module

Recover

Item no.: 447835-9500-000

Neutral Density Filter 0.06 D=25x2 Module

Item Number: 447835-9500-000

Neutral Density Filter 0.06 D=25x2 Module Consisting of: Grey filter 0.06, d=25x2

Item has been added to the configuration

Grey filter 0.06, d=25x2

Recover

Item no.: 447835-0000-000

Grey filter 0.06, d=25x2

Item Number: 447835-0000-000

Grey filter 0.06, d=25x2

Conversion filter

Item has been added to the configuration

Conversion filter 3200-5500K; d=25x2

Recover

Item no.: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item Number: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item has been added to the configuration

White-balance filter, d=36x2 mm

Recover

Item no.: 447810-9010-000

White-balance filter, d=36x2 mm

Item Number: 447810-9010-000

White-balance filter, d=36x2 mm for white-light adjustment and contrast enhancement in visual observation

Item has been added to the configuration

White-balance filter, d=25x1.5 mm

Recover

Item no.: 447810-9000-000

White-balance filter, d=25x1.5 mm

Item Number: 447810-9000-000

White-balance filter, d=25x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Item has been added to the configuration

Conversion filter 5700-3200 K, d=25 mm

Recover

Item no.: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm

Item Number: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

Conversion filter 5700-3200 K, d=32 mm

Recover

Item no.: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm

Item Number: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

White-balance filter, d=32x1.5 mm

Recover

Item no.: 000000-1155-789

White-balance filter, d=32x1.5 mm

Item Number: 000000-1155-789

White-balance filter, d=32x1.5 mm for white-light adjustment and contrast enhancement in visual observation

LP longpass filter

Item has been added to the configuration

IF yellow filter LP 515 dia. 25x2mm

Recover

Item no.: 447743-0000-000

IF yellow filter LP 515 dia. 25x2mm

Item Number: 447743-0000-000

IF yellow filter LP 515 dia. 25x2mm

BP bandpass filter

Item has been added to the configuration

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Recover

Item no.: 424533-9070-000

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Item Number: 424533-9070-000

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Color filter

Item has been added to the configuration

Contrast-enhancing blue filter, d=32x2.75 mm

Recover

Item no.: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm

Item Number: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm for enhanced blue-red contrast, e.g. with HE stained slides

Photomicrography (4)

T2 adapter

Item has been added to the configuration

T2-adapter for Canon EOS (EF Bayonet)

Recover

Item no.: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item Number: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item has been added to the configuration

T2-adapter for Minolta (Autofocus)

Recover

Item no.: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item Number: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item has been added to the configuration

T2-adapter for Contax (Contax-Bayonet)

Recover

Item no.: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item Number: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item has been added to the configuration

T2-adapter for Nikon F (F-Bayonet)

Recover

Item no.: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Item Number: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Video devices (10)

Other video adapters

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter T2-T2 SLR 2.5x

Recover

Item no.: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item Number: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item has been added to the configuration

Camera Adapter T2-T2 DSLR 1.6x

Recover

Item no.: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item Number: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Measuring and counting components (2)

Object micrometer A

Item has been added to the configuration

Stage micrometer for reflected light 5 + 100/100y d=0mm

Recover

Item no.: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm

Item Number: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Eyepieces (15)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br.foc.

Recover

Item no.: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item Number: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item has been added to the configuration

Eyepiece Pl 10x/23 Br. foc. w/micrometer for Stemi 305/508

Recover

Item no.: 444036-9080-000

Eyepiece Pl 10x/23 Br. foc. w/micrometer for Stemi 305/508

Item Number: 444036-9080-000

Eyepiece Pl 10x/23 Br. foc. w/micrometer for Stemi 305/508 - with Crossline micrometer 10:100, d=26 mm for Stemi

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with net micrometer

Recover

Item no.: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item Number: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Recover

Item no.: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item Number: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444036-9050-000

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Item Number: 444036-9050-000

Eyepiece PL 10x/22 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item Number: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc.

Recover

Item no.: 444036-9010-000

Eyepiece PL 10x/22 Br. foc.

Item Number: 444036-9010-000

Eyepiece PL 10x/22 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Auxiliary microscopes

Item has been added to the configuration

Auxiliary microscope, d=30

Recover

Item no.: 444830-9902-000

Auxiliary microscope, d=30

Item Number: 444830-9902-000

Auxiliary microscope, d=30 to adjust the phase rings and darkfield stop in the condenser

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item Number: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Eyepieces for spectacle wearers, focusing, Pol, 10x

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Recover

Item no.: 444038-9000-000

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Item Number: 444038-9000-000

Eyepiece PL 10x/23 Br. foc. Pol with crossline graticule

Item has been added to the configuration

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Recover

Item no.: 444036-9020-000

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Item Number: 444036-9020-000

Eyepiece PL 10x/22 Br. foc. Pol with crossline graticule

Eyepiece accessories (13)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Crossline graticule, d=26 mm

Recover

Item no.: 474064-0000-000

Crossline graticule, d=26 mm

Item Number: 474064-0000-000

Crossline graticule d=26 mm

Item has been added to the configuration

Structure comparison disk single grains (I), d=26 mm

Recover

Item no.: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Item Number: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Item has been added to the configuration

Measuring graticule 2x/20:200, d=26 mm

Recover

Item no.: 454089-0000-000

Measuring graticule 2x/20:200, d=26 mm

Item Number: 454089-0000-000

Measuring graticule 2x/20:200, d=26 mm

Item has been added to the configuration

Format reticle MC 2.5x/ d=26 mm

Recover

Item no.: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item Number: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item has been added to the configuration

Crossline micrometer 14:140, d=26 mm

Recover

Item no.: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Item Number: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Net micrometer 10x10/5:10, d=21 mm

Recover

Item no.: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item Number: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item has been added to the configuration

Micrometer 10:100, d=21 mm

Recover

Item no.: 434011-0000-000

Micrometer 10:100, d=21 mm

Item Number: 434011-0000-000

Micrometer 10:100, d=21 mm

Stops (D)

Item has been added to the configuration

Pinhole diaphragm, d=30mm

Recover

Item no.: 444020-0000-000

Pinhole diaphragm, d=30mm

Item Number: 444020-0000-000

Pinhole diaphragm, d=30mm

Pointer for eyepieces

Item has been added to the configuration

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Recover

Item no.: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Item Number: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Transmitted-light objectives (124)

Plan-Neofluar LD Phase Contrast

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Recover

Item no.: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Item Number: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Recover

Item no.: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Item Number: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Recover

Item no.: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Item Number: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Recover

Item no.: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Item Number: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Recover

Item no.: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Item Number: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Plan-Neofluar LD BrightField

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Recover

Item no.: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Item Number: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Recover

Item no.: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Item Number: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Recover

Item no.: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Item Number: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

A-Plan LD Phase Contrast

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 Ph2 M27

Recover

Item no.: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27

Item Number: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph2 M27

Recover

Item no.: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27

Item Number: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph1 M27

Recover

Item no.: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27

Item Number: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph2 M27

Recover

Item no.: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27

Item Number: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1- M27

Recover

Item no.: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27

Item Number: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1 M27

Recover

Item no.: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27

Item Number: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27

Item Number: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 Ph1 M27

Recover

Item no.: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27

Item Number: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)

A-Plan LD BrightField

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 M27

Recover

Item no.: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27

Item Number: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 M27

Recover

Item no.: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27

Item Number: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 M27

Recover

Item no.: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27

Item Number: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 M27

Recover

Item no.: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27

Item Number: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 M27

Recover

Item no.: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27

Item Number: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27 (FWD=11.7mm at CG=1mm polystyrene)

Fluar BrightField

Item has been added to the configuration

Objective alpha Plan-Fluar 100x/1.49 Oil M27

Recover

Item no.: 421190-9800-000

Objective alpha Plan-Fluar 100x/1.49 Oil M27

Item Number: 421190-9800-000

Objective alpha Plan-Fluar 100x/1.49 Oil M27 (FWD=0.08mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Fluar 20x/0.75 M27

Recover

Item no.: 420150-9900-000

Objective Fluar 20x/0.75 M27

Item Number: 420150-9900-000

Objective Fluar 20x/0.75 M27 (FWD=0.60mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Fluar 10x/0.5 M27

Recover

Item no.: 420140-9901-000

Objective Fluar 10x/0.5 M27

Item Number: 420140-9901-000

Objective Fluar 10x/0.5 M27 (WD=1.6mm)

Item has been added to the configuration

Objective Fluar 5x/0.25 M27

Recover

Item no.: 420130-9900-000

Objective Fluar 5x/0.25 M27

Item Number: 420130-9900-000

Objective Fluar 5x/0.25 M27 (FWD=12.5mm)

Item has been added to the configuration

Objective Fluar 2.5x/0.12 M27

Recover

Item no.: 420120-9901-000

Objective Fluar 2.5x/0.12 M27

Item Number: 420120-9901-000

Objective Fluar 2.5x/0.12 M27 (FWD=8.7mm)

A-Plan BrightField

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil D=0 M27

Recover

Item no.: 421094-9900-000

Objective A-Plan 100x/1.25 Oil D=0 M27

Item Number: 421094-9900-000

Objective A-Plan 100x/1.25 Oil D=0 M27 (FWD=0.31mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil M27

Recover

Item no.: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27

Item Number: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/0.8 M27

Recover

Item no.: 421090-9800-000

Objective A-Plan 100x/0.8 M27

Item Number: 421090-9800-000

Objective A-Plan 100x/0.8 M27 (FWD=0.97mm)

Item has been added to the configuration

Objective A-Plan 63x/0.8 M27

Recover

Item no.: 421080-9900-000

Objective A-Plan 63x/0.8 M27

Item Number: 421080-9900-000

Objective A-Plan 63x/0.8 M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 D=0 M27

Recover

Item no.: 421064-9900-000

Objective A-Plan 40x/0.65 D=0 M27

Item Number: 421064-9900-000

Objective A-Plan 40x/0.65 D=0 M27 (FWD=0.55mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 M27

Recover

Item no.: 421060-9900-000

Objective A-Plan 40x/0.65 M27

Item Number: 421060-9900-000

Objective A-Plan 40x/0.65 M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 M27

Recover

Item no.: 421050-9900-000

Objective A-Plan 20x/0.45 M27

Item Number: 421050-9900-000

Objective A-Plan 20x/0.45 M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 M27

Recover

Item no.: 421040-9900-000

Objective A-Plan 10x/0.25 M27

Item Number: 421040-9900-000

Objective A-Plan 10x/0.25 M27 (FWD=4.5mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 M27

Recover

Item no.: 421030-9900-000

Objective A-Plan 5x/0.12 M27

Item Number: 421030-9900-000

Objective A-Plan 5x/0.12 M27 (FWD=10.1mm)

Item has been added to the configuration

Objective A-Plan 2.5x/0.06 M27

Recover

Item no.: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27

Item Number: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27 (FWD=10.4mm)

A-Plan Phase Contrast

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27

Item Number: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph2 M27

Recover

Item no.: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27

Item Number: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 63x/0.8 Ph2 M27

Recover

Item no.: 421081-9910-000

Objective A-Plan 63x/0.8 Ph2 M27

Item Number: 421081-9910-000

Objective A-Plan 63x/0.8 Ph2 M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Ph2 M27

Recover

Item no.: 421061-9910-000

Objective A-Plan 40x/0.65 Ph2 M27

Item Number: 421061-9910-000

Objective A-Plan 40x/0.65 Ph2 M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 Ph2 M27

Recover

Item no.: 421051-9910-000

Objective A-Plan 20x/0.45 Ph2 M27

Item Number: 421051-9910-000

Objective A-Plan 20x/0.45 Ph2 M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27

Item Number: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27 (FWD=4.3mm)

A-Plan Polarization Contrast

Item has been added to the configuration

Objective A-Plan 63x/0.8 Pol M27

Recover

Item no.: 421083-9900-000

Objective A-Plan 63x/0.8 Pol M27

Item Number: 421083-9900-000

Objective A-Plan 63x/0.8 Pol M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Pol M27

Recover

Item no.: 421063-9900-000

Objective A-Plan 40x/0.65 Pol M27

Item Number: 421063-9900-000

Objective A-Plan 40x/0.65 Pol M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 Pol M27

Recover

Item no.: 421053-9900-000

Objective A-Plan 20x/0.45 Pol M27

Item Number: 421053-9900-000

Objective A-Plan 20x/0.45 Pol M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Pol M27

Recover

Item no.: 421043-9900-000

Objective A-Plan 10x/0.25 Pol M27

Item Number: 421043-9900-000

Objective A-Plan 10x/0.25 Pol M27 (FWD=4.5mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 Pol M27

Recover

Item no.: 421033-9900-000

Objective A-Plan 5x/0.12 Pol M27

Item Number: 421033-9900-000

Objective A-Plan 5x/0.12 Pol M27 (FWD=10.1mm)

Achroplan BrightField

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Iris M27

Recover

Item no.: 420996-9901-000

Objective N-Achroplan 100x/1.25 Oil Iris M27

Item Number: 420996-9901-000

Objective N-Achroplan 100x/1.25 Oil Iris M27 (FWD=0.29mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Iris M27

Recover

Item no.: 420996-9900-000

Objective N-Achroplan 100x/1.25 Oil Iris M27

Item Number: 420996-9900-000

Objective N-Achroplan 100x/1.25 Oil Iris M27 (FWD=0.29mm), Numerical Aperture adjustable from 0.7 to 1.25, incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Recover

Item no.: 420994-9901-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Item Number: 420994-9901-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27 (FWD=0.45mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Recover

Item no.: 420994-9900-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Item Number: 420994-9900-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27 designed for samples without cover glass (FWD=0.45mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil M27

Recover

Item no.: 420990-9901-000

Objective N-Achroplan 100x/1.25 Oil M27

Item Number: 420990-9901-000

Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil M27

Recover

Item no.: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27

Item Number: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective W N-Achroplan 63x/0.9 M27

Recover

Item no.: 420987-9900-000

Objective W N-Achroplan 63x/0.9 M27

Item Number: 420987-9900-000

Objective W N-Achroplan 63x/0.9 M27 (FWD=2.4mm)

Item has been added to the configuration

Objective N-Achroplan 63x/0.95 CG=0 M27

Recover

Item no.: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27

Item Number: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27 designed for samples without cover glass (FWD=0.17mm)

Item has been added to the configuration

Objective N-Achroplan 63x/0.85 M27

Recover

Item no.: 420980-9900-000

Objective N-Achroplan 63x/0.85 M27

Item Number: 420980-9900-000

Objective N-Achroplan 63x/0.85 M27 (FWD=0.20mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 50x/1.0 Oil M27

Recover

Item no.: 420970-9900-000

Objective N-Achroplan 50x/1.0 Oil M27

Item Number: 420970-9900-000

Objective N-Achroplan 50x/1.0 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective W N-Achroplan 40x/0.75 M27

Recover

Item no.: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27

Item Number: 420967-9900-000

Objective W N-Achroplan 40x/0.75 M27 (FWD=2.1mm)

Item has been added to the configuration

Objective N-Achroplan 40x/0.65 M27

Recover

Item no.: 420960-9901-000

Objective N-Achroplan 40x/0.65 M27

Item Number: 420960-9901-000

Objective N-Achroplan 40x/0.65 M27 (FWD=0.60mm)

Item has been added to the configuration

Objective N-Achroplan 40x/0.8 Oil M27

Recover

Item no.: 420960-9800-000

Objective N-Achroplan 40x/0.8 Oil M27

Item Number: 420960-9800-000

Objective N-Achroplan 40x/0.8 Oil M27 (FWD=0.36mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective W N-Achroplan 20x/0.5 M27

Recover

Item no.: 420957-9900-000

Objective W N-Achroplan 20x/0.5 M27

Item Number: 420957-9900-000

Objective W N-Achroplan 20x/0.5 M27 (FWD=2.6mm)

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 M27

Recover

Item no.: 420950-9901-000

Objective N-Achroplan 20x/0.45 M27

Item Number: 420950-9901-000

Objective N-Achroplan 20x/0.45 M27 (FWD=0.63mm)

Item has been added to the configuration

Objective W N-Achroplan 10x/0.3 M27

Recover

Item no.: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27

Item Number: 420947-9900-000

Objective W N-Achroplan 10x/0.3 M27 (FWD=2.6mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 M27

Recover

Item no.: 420940-9901-000

Objective N-Achroplan 10x/0.25 M27

Item Number: 420940-9901-000

Objective N-Achroplan 10x/0.25 M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 M27

Recover

Item no.: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27

Item Number: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27 (FWD=12.0mm)

Item has been added to the configuration

Objective N-Achroplan 2.5x/0.07 M27

Recover

Item no.: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27

Item Number: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27 (FWD=9.8mm)

Achroplan Phase Contrast

Item has been added to the configuration

Objektiv N-Achroplan 100x/1,25 Oil Ph3 M27

Recover

Item no.: 420991-9911-000

Objektiv N-Achroplan 100x/1,25 Oil Ph3 M27

Item Number: 420991-9911-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27 (FWD=0.29mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Item Number: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 63x/0.85 Ph3 M27

Recover

Item no.: 420981-9910-000

Objective N-Achroplan 63x/0.85 Ph3 M27

Item Number: 420981-9910-000

Objective N-Achroplan 63x/0.85 Ph3 M27 (FWD=0.20mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 50x/1.0 Oil Ph3 M27

Recover

Item no.: 420971-9910-000

Objective N-Achroplan 50x/1.0 Oil Ph3 M27

Item Number: 420971-9910-000

Objective N-Achroplan 50x/1.0 Oil Ph3 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 40x/0.65 Ph2 M27

Recover

Item no.: 420961-9911-000

Objective N-Achroplan 40x/0.65 Ph2 M27

Item Number: 420961-9911-000

Objective N-Achroplan 40x/0.65 Ph2 M27 (FWD=0.60mm)

Item has been added to the configuration

Objective N-Achroplan 40x/0.8 Oil Ph3 M27

Recover

Item no.: 420961-9810-000

Objective N-Achroplan 40x/0.8 Oil Ph3 M27

Item Number: 420961-9810-000

Objective N-Achroplan 40x/0.8 Oil Ph3 M27 (FWD=0.36mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 Ph2 M27

Recover

Item no.: 420951-9911-000

Objective N-Achroplan 20x/0.45 Ph2 M27

Item Number: 420951-9911-000

Objective N-Achroplan 20x/0.45 Ph2 M27 (FWD=0.65mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 Ph1 M27

Recover

Item no.: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27

Item Number: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 Ph1 M27

Recover

Item no.: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27

Item Number: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27 (FWD=12.0mm)

Achroplan Polarization Contrast

Item has been added to the configuration

Objective N-Achroplan 50x/0.8 Pol M27

Recover

Item no.: 420973-9900-000

Objective N-Achroplan 50x/0.8 Pol M27

Item Number: 420973-9900-000

Objective N-Achroplan 50x/0.8 Pol M27 (FWD=0.41mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 Pol M27

Recover

Item no.: 420953-9901-000

Objective N-Achroplan 20x/0.45 Pol M27

Item Number: 420953-9901-000

Objective N-Achroplan 20x/0.45 Pol M27 (FWD=0.63mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 Pol M27

Recover

Item no.: 420943-9901-000

Objective N-Achroplan 10x/0.25 Pol M27

Item Number: 420943-9901-000

Objective N-Achroplan 10x/0.25 Pol M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 Pol M27

Recover

Item no.: 420933-9901-000

Objective N-Achroplan 5x/0.15 Pol M27

Item Number: 420933-9901-000

Objective N-Achroplan 5x/0.15 Pol M27 (FWD=12.0mm)

Plan-Apochromat DIC

Item has been added to the configuration

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27

Recover

Item no.: 420792-9970-000

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27

Item Number: 420792-9970-000

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27 (CG=0.14-0.18mm at 23 °C and CG=0.15-0.19 at 37 °C) (FWD=0.17mm at CG=0.16mm), VIS-IR incl. Immersol G, bottle 10 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil DIC M27

Recover

Item no.: 420792-9901-000

Objective Plan-Apochromat 100x/1.4 Oil DIC M27

Item Number: 420792-9901-000

Objective Plan-Apochromat 100x/1.4 Oil DIC M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil DIC M27

Recover

Item no.: 420782-9900-000

Objective Plan-Apochromat 63x/1.4 Oil DIC M27

Item Number: 420782-9900-000

Objective Plan-Apochromat 63x/1.4 Oil DIC M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/1.3 Oil DIC M27

Recover

Item no.: 420762-9800-000

Objective Plan-Apochromat 40x/1.3 Oil DIC M27

Item Number: 420762-9800-000

Objective Plan-Apochromat 40x/1.3 Oil DIC M27 (FWD=0.21mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/1.4 Oil DIC M27

Recover

Item no.: 420762-9700-000

Objective Plan-Apochromat 40x/1.4 Oil DIC M27

Item Number: 420762-9700-000

Objective Plan-Apochromat 40x/1.4 Oil DIC M27 (FWD=0.13mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20 ml and cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Plan-Apochromat Phase Contrast

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27

Recover

Item no.: 420791-9911-000

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27

Item Number: 420791-9911-000

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27

Recover

Item no.: 420781-9910-000

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27

Item Number: 420781-9910-000

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27

Recover

Item no.: 420761-9810-000

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27

Item Number: 420761-9810-000

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27 (FWD=0.2mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27

Recover

Item no.: 420661-9970-000

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27

Item Number: 420661-9970-000

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27 (FWD=0.25mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 20x/0.8 Ph2 M27

Recover

Item no.: 420651-9912-000

Objective Plan-Apochromat 20x/0.8 Ph2 M27

Item Number: 420651-9912-000

Objective Plan-Apochromat 20x/0.8 Ph2 M27 (FWD=0.55mm), incl. cover glasses, high performance, CG=0.17mm, box with 100 pc. Lead-free

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.45 Ph1 M27

Recover

Item no.: 420641-9910-000

Objective Plan-Apochromat 10x/0.45 Ph1 M27

Item Number: 420641-9910-000

Objective Plan-Apochromat 10x/0.45 Ph1 M27 (FWD=2.1mm)

Plan-Apochromat BrightField

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil M27

Recover

Item no.: 420790-9901-000

Objective Plan-Apochromat 100x/1.4 Oil M27

Item Number: 420790-9901-000

Objective Plan-Apochromat 100x/1.4 Oil M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil Iris M27

Recover

Item no.: 420786-9900-000

Objective Plan-Apochromat 63x/1.4 Oil Iris M27

Item Number: 420786-9900-000

Objective Plan-Apochromat 63x/1.4 Oil Iris M27 (FWD=0.19mm), Numerical Aperture adjustable from 0.7 to 1.4, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil M27

Recover

Item no.: 420780-9900-000

Objective Plan-Apochromat 63x/1.4 Oil M27

Item Number: 420780-9900-000

Objective Plan-Apochromat 63x/1.4 Oil M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/0.95 Corr M27

Recover

Item no.: 420660-9970-000

Objective Plan-Apochromat 40x/0.95 Corr M27

Item Number: 420660-9970-000

Objective Plan-Apochromat 40x/0.95 Corr M27 (FWD=0.25mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 20x/0.8 M27

Recover

Item no.: 420650-9903-000

Objective Plan-Apochromat 20x/0.8 M27

Item Number: 420650-9903-000

Objective Plan-Apochromat 20x/0.8 M27 (FWD=0.55mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc Lead-free

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.45 M27

Recover

Item no.: 420640-9900-000

Objective Plan-Apochromat 10x/0.45 M27

Item Number: 420640-9900-000

Objective Plan-Apochromat 10x/0.45 M27 (FWD=2.1mm)

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.3 M27

Recover

Item no.: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27

Item Number: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective Plan-Apochromat 5x/0.16 M27

Recover

Item no.: 420630-9900-000

Objective Plan-Apochromat 5x/0.16 M27

Item Number: 420630-9900-000

Objective Plan-Apochromat 5x/0.16 M27 (FWD=12.1mm)

Plan-Neofluar BrightField

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Recover

Item no.: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Item Number: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27 (FWD=0.20mm), Numerical Aperture adjustable from 0.7 to 1.3, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Recover

Item no.: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Item Number: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Recover

Item no.: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Item Number: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27 (FWD=0.10mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Recover

Item no.: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Item Number: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Recover

Item no.: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Item Number: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27 (FWD=0.12mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 M27

Recover

Item no.: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27

Item Number: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 M27

Recover

Item no.: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27

Item Number: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 M27

Recover

Item no.: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27

Item Number: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 M27

Recover

Item no.: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27

Item Number: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 2.5x/0.085 M27

Recover

Item no.: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27

Item Number: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27 (FWD=8.8mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 420310-9901-000

Objective EC Plan-Neofluar 1.25x/0.03 M27

Item Number: 420310-9901-000

Objective EC Plan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 1x/0.025 M27

Recover

Item no.: 420300-9900-000

Objective EC Plan-Neofluar 1x/0.025 M27

Item Number: 420300-9900-000

Objective EC Plan-Neofluar 1x/0.025 M27 (FWD=3.0mm)

Plan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Recover

Item no.: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Item Number: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.9 Pol M27

Recover

Item no.: 420363-9901-000

Objective EC Plan-Neofluar 40x/0.9 Pol M27

Item Number: 420363-9901-000

Objective EC Plan-Neofluar 40x/0.9 Pol M27 (FWD=0.41mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 Pol M27

Recover

Item no.: 420353-9900-000

Objective EC Plan-Neofluar 20x/0.50 Pol M27

Item Number: 420353-9900-000

Objective EC Plan-Neofluar 20x/0.50 Pol M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Recover

Item no.: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Item Number: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 Pol M27

Recover

Item no.: 420333-9901-000

Objective EC Plan-Neofluar 5x/0.16 Pol M27

Item Number: 420333-9901-000

Objective EC Plan-Neofluar 5x/0.16 Pol M27 (FWD=18.5mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27

Recover

Item no.: 420323-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27

Item Number: 420323-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27 (FWD=8.8mm)

Plan-Neofluar Phase Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Recover

Item no.: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Item Number: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27

Recover

Item no.: 420481-9911-000

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27

Item Number: 420481-9911-000

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27 (FWD=0.10mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27

Recover

Item no.: 420461-9910-000

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27

Item Number: 420461-9910-000

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Recover

Item no.: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Item Number: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Recover

Item no.: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Item Number: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Recover

Item no.: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Item Number: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Recover

Item no.: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Item Number: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27 (FWD=18.5mm)

Plan-Neofluar DIC

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Recover

Item no.: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Item Number: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Reflected-light objectives (51)

Epiplan BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 BD M27

Recover

Item no.: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27

Item Number: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 BD M27

Recover

Item no.: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27

Item Number: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 BD M27

Recover

Item no.: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27

Item Number: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 BD M27

Recover

Item no.: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27

Item Number: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 BD M27

Recover

Item no.: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27

Item Number: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 BD M27

Recover

Item no.: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27

Item Number: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27 (FWD=11.8mm)

Epiplan LD BrightField

Item has been added to the configuration

Objective LD Epiplan 20x/0.4 M27

Recover

Item no.: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27

Item Number: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27 (CG=0mm with or CG=1.5mm without coverglass cap) (FWD=7.2mm at D=0mm)

Epiplan-Apochromat BrightField/DarkField DIC

Item has been added to the configuration

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Recover

Item no.: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Item Number: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27 (FWD=0.21mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Recover

Item no.: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Item Number: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27 (FWD=0.28mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Recover

Item no.: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Item Number: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27 (FWD=1.7mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Recover

Item no.: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Item Number: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27 (FWD=5.0mm)

Epiplan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Recover

Item no.: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Item Number: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27 (FWD=0.37mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Recover

Item no.: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Item Number: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27

Recover

Item no.: 422373-9900-000

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27

Item Number: 422373-9900-000

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27 (FWD=0.40mm), incl. Immersol M, oiler 20ml

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Recover

Item no.: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Item Number: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Recover

Item no.: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Item Number: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Recover

Item no.: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Item Number: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Recover

Item no.: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Item Number: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Recover

Item no.: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Item Number: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27 (FWD=15.8mm)

Epiplan-Neofluar LD BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Recover

Item no.: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Item Number: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27 (FWD=4.1mm)

Epiplan-Neofluar LD DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Recover

Item no.: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Item Number: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27 (FWD=4.0mm)

Epiplan-Neofluar BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Recover

Item no.: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Item Number: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Recover

Item no.: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Item Number: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27 (FWD=12.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Recover

Item no.: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Item Number: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Recover

Item no.: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Item Number: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Recover

Item no.: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Item Number: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Recover

Item no.: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Item Number: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Recover

Item no.: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Item Number: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm)

Epiplan-Neofluar DIC

Item has been added to the configuration

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Recover

Item no.: 422472-9900-000

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Item Number: 422472-9900-000

Objective LD EC Epiplan-Neofluar 50x/0.55 DIC M27 (FWD=9.1mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Recover

Item no.: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Item Number: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27 (FWD=12.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Recover

Item no.: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Item Number: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Recover

Item no.: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Item Number: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Recover

Item no.: 422342-9900-000

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Item Number: 422342-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 DIC M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Recover

Item no.: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Item Number: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Recover

Item no.: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Item Number: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27 (FWD=15.8mm)

Epiplan-Neofluar BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Recover

Item no.: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Item Number: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Recover

Item no.: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Item Number: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Recover

Item no.: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Item Number: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Recover

Item no.: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Item Number: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27 (FWD=9mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Recover

Item no.: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Item Number: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27 (FWD=14.5mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Recover

Item no.: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Item Number: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm)

Epiplan-Neofluar BrightField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Recover

Item no.: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Item Number: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Item Number: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Epiplan BrightField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 M27

Recover

Item no.: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27

Item Number: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 M27

Recover

Item no.: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27

Item Number: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 M27

Recover

Item no.: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27

Item Number: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 M27

Recover

Item no.: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27

Item Number: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 M27

Recover

Item no.: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27

Item Number: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 M27

Recover

Item no.: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27

Item Number: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm)

Epiplan Polarization Contrast

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 Pol M27

Recover

Item no.: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27

Item Number: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 Pol M27

Recover

Item no.: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27

Item Number: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27 (FWD=11.0mm)

Accessories for objectives (8)

Microscope slides, various accessories

Item has been added to the configuration

Metallurgical levelling press

Recover

Item no.: 478962-0000-000

Metallurgical levelling press

Item Number: 478962-0000-000

Metallurgical levelling press

Item has been added to the configuration

Object marker

Recover

Item no.: 000000-1105-072

Object marker

Item Number: 000000-1105-072

Object marker for W 0.8 objective thread, for the point or circle-shaped marking of specimens on standard microscope slides with wipe-resistant red color

Item has been added to the configuration

Refill set for object marker 000000-1105-072

Recover

Item no.: 000000-0428-327

Refill set for object marker 000000-1105-072

Item Number: 000000-0428-327

Refill set for object marker 000000-1105-072

Cleaning paper

Item has been added to the configuration

Box of lens cleaning paper (300 sheets)

Recover

Item no.: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Item Number: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Cover slip caps

Item has been added to the configuration

Coverglass cap for D=0.17mm

Recover

Item no.: 422904-9001-000

Coverglass cap for D=0.17mm

Item Number: 422904-9001-000

Coverglass cap for D=0.17mm for objectives LD A-Plan 10x/0.25, 20x/0.35, 32x/0.45, 40x/0.55 and 63x/0.65, if samples with cover glass 0.17 mm shall be observed

Antiflex caps

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Recover

Item no.: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item Number: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Recover

Item no.: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Item Number: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Intermediate rings

Item has been added to the configuration

Adapter M 27x0.75 / W 0.8 H "0"

Recover

Item no.: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Item Number: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Condensers (15)

Condenser, D

Item has been added to the configuration

Dry dark-field condenser 0.8/0.95 (0.6-0.75) WD=6.0mm

Recover

Item no.: 465505-0000-000

Dry dark-field condenser 0.8/0.95 (0.6-0.75) WD=6.0mm

Item Number: 465505-0000-000

Dry dark-field condenser 0.8/0.95 (0.6-0.75) WD=6.0mm

Item has been added to the configuration

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Recover

Item no.: 465500-0000-000

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Item Number: 465500-0000-000

Ultra condenser 1.2/1.4 (0.75-1.0) WD=1.1-1.3mm

Condenser holder

Item has been added to the configuration

Condenser holder Z for dark-field condenser

Recover

Item no.: 445323-0000-000

Condenser holder Z for dark-field condenser

Item Number: 445323-0000-000

Condenser holder Z for dark-field condenser

DIC prisms type III

Item has been added to the configuration

Condenser module DIC III/0.9 with polarizer

Recover

Item no.: 426715-9040-000

Condenser module DIC III/0.9 with polarizer

Item Number: 426715-9040-000

Condenser module DIC III/0.9 with polarizer

DIC prisms type II

Item has been added to the configuration

Condenser module DIC II/0.9 with polarizer

Recover

Item no.: 426715-9030-000

Condenser module DIC II/0.9 with polarizer

Item Number: 426715-9030-000

Condenser module DIC II/0.9 with polarizer

DIC prisms type I

Item has been added to the configuration

Condenser module DIC I/0.9 with polarizer

Recover

Item no.: 426715-9020-000

Condenser module DIC I/0.9 with polarizer

Item Number: 426715-9020-000

Condenser module DIC I/0.9 with polarizer

Condenser, H

Item has been added to the configuration

Condenser LD aplanatic 0.8 BF, WD=5.8mm

Recover

Item no.: 424225-9120-000

Condenser LD aplanatic 0.8 BF, WD=5.8mm

Item Number: 424225-9120-000

Condenser LD aplanatic 0.8 BF, WD=5.8mm - for objectives 5x-100x - compatible with low-power system for objectives 2.5x/4x - compatible with modulator disk for phase contrast

Item has been added to the configuration

Condenser 0.9/1.25 H

Recover

Item no.: 424225-9001-000

Condenser 0.9/1.25 H

Item Number: 424225-9001-000

Condenser 0.9/1.25 H For objectives 5x-100x, compatible with low-power system for objectives 2.5x/4x, WD=0.8mm

Condenser, H, PH, D, DIC

Item has been added to the configuration

Condenser, achromatic-aplanatic 0.4 H Ph LD

Recover

Item no.: 424225-9110-000

Condenser, achromatic-aplanatic 0.4 H Ph LD

Item Number: 424225-9110-000

Condenser, achromatic-aplanatic 0.4 H Ph LD specifically for Linkam heating and freezing stages, with front lens switchable on the left and right, 5-position modulator disk with Ph1 and Ph2 stop, 1 brightfield position with aperture stop, WD=14mm

Item has been added to the configuration

Condenser, achromatic-aplanatic 0.9 H D Ph DIC

Recover

Item no.: 424225-9070-000

Condenser, achromatic-aplanatic 0.9 H D Ph DIC

Item Number: 424225-9070-000

Condenser, achromatic-aplanatic 0.9 H D Ph DIC with front lens switchable on the left and right. 5-position modulator disk. 4 centerable positions with Ph1, Ph2, Ph3 and dark-field stop 0.75. 1 bright-field position with aperture stop. Alternative use of up to 4 DIC prisms / slit-diaphragms PlasDIC possible instead of the Ph/D stops. For objectives 1.0-100x, WD=1.0mm

Condenser, POL

Item has been added to the configuration

Condenser, achromatic-aplanatic 0.9 H Pol

Recover

Item no.: 424225-9090-000

Condenser, achromatic-aplanatic 0.9 H Pol

Item Number: 424225-9090-000

Condenser, achromatic-aplanatic 0.9 H Pol with front lens which can be switched on the right and left. For objectives 1.0x-100x, (2.5x-100x at use of the polarizer slider for LED illuminator), WD=1.0mm

Condenser, POL

Item has been added to the configuration

Condenser 0.9 H Pol

Recover

Item no.: 424225-9080-000

Condenser 0.9 H Pol

Item Number: 424225-9080-000

Condenser 0.9 H Pol For objectives 5x-100x, (10x-100x at use of the polarizer slider for LED illuminator), WD=0.6mm

Condenser, H

Item has been added to the configuration

Condenser, achromatic-aplanatic 0.9 H

Recover

Item no.: 424225-9060-000

Condenser, achromatic-aplanatic 0.9 H

Item Number: 424225-9060-000

Condenser, achromatic-aplanatic 0.9 H with front lens which can be switched on the right and left. For objectives 1.0x-100x, WD=1.0mm

Low-power devices

Item has been added to the configuration

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Recover

Item no.: 424225-9050-000

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Item Number: 424225-9050-000

Low-power system for objectives 2.5x/4x for condenser 0.9/1.25 H

Turret, adjustable

Item has been added to the configuration

Modulator disk H, D 0.65, Ph 1,2,3 PlasDIC for condenser 0.9/1.25

Recover

Item no.: 424225-9010-000

Modulator disk H, D 0.65, Ph 1,2,3 PlasDIC for condenser 0.9/1.25

Item Number: 424225-9010-000

Modulator disk H, D 0.65, Ph 1,2,3 PlasDIC for condenser 0.9/1.25 Alternative use of the slit-diaphragm for PlasDIC possible instead of the Ph/D stops.

Stereomicroscopes (1)

Stemi stage accessories

Item has been added to the configuration

Mobile coaxial drive XY; CAN (D)

Recover

Item no.: 435606-9000-000

Mobile coaxial drive XY; CAN (D)

Item Number: 435606-9000-000

Mobile coaxial drive XY; CAN (D) for mechanical stages mot; CAN, - hanging coaxial drive XY on stand - adjustable in length and friction - coarse/fine button C/F on both sides - memory buttons M1/M2 on both sides - for key functionality EMS 3 is needed - integr. CAN-HD15 cable to stage mot - CAN-HD15 cable to stage mot

Computer and accessories (4)

Various computer accessories

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language English US (O)

Recover

Item no.: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item Number: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item has been added to the configuration

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Recover

Item no.: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Item Number: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O) Cable, High-Speed-HDMI-Cable, Premium, Resolution 4K, HDMI connector A to HDMI connector A, black, 2m

Item has been added to the configuration

Mouse, Optical USB-Scroll Mouse (O)

Recover

Item no.: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item Number: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language German (O)

Recover

Item no.: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Item Number: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Connecting cables (1)

Illuminator cables

Item has been added to the configuration

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Control devices (3)

Motor control units

Item has been added to the configuration

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Stage controller XY PIEZO WSB CAN (D)

Recover

Item no.: 432901-9904-000

Stage controller XY PIEZO WSB CAN (D)

Item Number: 432901-9904-000

Stage controller XY PIEZO WSB CAN (D) for scanning stages with PIEZO drive Interfaces: CAN, USB, RS232, Trigger IN, Trigger OUT incl. USB cable, CAN cable and stage cable 90 - 240 V / 40 - 60 Hz; 250 VA, country specific power cord

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Micromanipulation injection (1)

PECON devices

Item has been added to the configuration

TempController 2000-2 (D)

Recover

Item no.: 411860-9005-000

TempController 2000-2 (D)

Item Number: 411860-9005-000

TempController 2000-2 (D) to control the temperature of up to 2 electrically heated S1 components - Temperature range: room temperature up to 60° C - Display of nominal and actual temperature of two channels - Internal resolution: 0.01° C - Temperature accuracy: +/- 0.1°C - 8 selectable parameter sets for the control - USB port for external temperature control - 90V...260V AC/50...60Hz/max. 200VA - country-specific power cable Dimensions (LxWxH): 280 x 200 x 130 mm

Image processing (90)

Camera accessories

Item has been added to the configuration

Wi-Fi adapter package (O)

Recover

Item no.: 426570-9110-000

Wi-Fi adapter package (O)

Item Number: 426570-9110-000

Wi-Fi adapter package (O) consisting of Wireless Network Adapter and USB Adapter USB Type-C to Type-A Technical specification: Frequency: 2.4 GHz Transmission: 400 Mbps Antenna: Built-in 2dBi Transmit power: 18 dBm Interface: USB 3.0 Standard: IEEE802.11a/b/g/n

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 mono R2 (D)

Recover

Item no.: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D)

Item Number: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live FrameRates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 # Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 color R2

Recover

Item no.: 426560-9081-000

Microscopy Camera Axiocam 712 color R2

Item Number: 426560-9081-000

Microscopy Camera Axiocam 712 color R2 High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 2048 x 1504 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperaturesfrom 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (furtheraccessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free aircirculation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol (D)

Recover

Item no.: 426560-9070-000

Microscopy Camera Axiocam 705 pol (D)

Item Number: 426560-9070-000

Microscopy Camera Axiocam 705 pol (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel(8 out of 14 bit or compression mode) Dark Current: <0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.3 (blue edition) or higher, ZEN core v3.1 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 mono R2 (D)

Recover

Item no.: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D)

Item Number: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 # Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 color R2 (D)

Recover

Item no.: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D)

Item Number: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 702 mono (D)

Recover

Item no.: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D)

Item Number: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D) High performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1920 (H) x 1216 (V) = 2.3 Mega Pixels Pixel size: 5.86 µm x 5.86 µm Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2" (13.3 mm diagonal) Spectral range: With protection glass app. 350 nm to 1000 nm Quantum Efficiency 72% at 520 nm (including sensor cover slip) Max. Full Well Capacity: Approx. 32.000 e Selectable Resolution: H x V Binning Faktor (digital) 1920 x 1216 1x1 basic pixel count 960 x 608 2x2 640 x 404 3x3 480 x 304 4x4 384 x 240 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms, H x V Frame Rate 1936 x 1460 >100 fps Frame rates for time series recording (depending on computer hardware and software configuration) H x V Frame Rate 1920 x 1216 128 1920 x 1080 145 960 x 612 245 480 x 306 458 384 x 244 557 1280 x 112 982 1024 x 112 1003 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit (internal 12 Bit ADC, 14 Bit by data processing) Dynamic Range: Typical >5000 : 1 (74> dB) at typ. < 6.e readout noise Dark current: ca. 1.1 e/p/s Integration Time: 0.1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 15°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 300 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 4.7 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 2 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. < 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Dutch NL (O)

Recover

Item no.: 410380-0800-000

Language Pack Dutch NL (O)

Item Number: 410380-0800-000

Language Pack Dutch NL (O) - Keyboard with Dutch layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Recover

Item no.: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Item Number: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with english (US) layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 English US (O)

Recover

Item no.: 410376-0200-000

Language Package Windows 10 Enterprise Embedded x64 English US (O)

Item Number: 410376-0200-000

Language Package Windows 10 Enterprise Embedded x64 English US (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with english (US) layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 German (O)

Recover

Item no.: 410376-0100-000

Language Package Windows 10 Enterprise Embedded x64 German (O)

Item Number: 410376-0100-000

Language Package Windows 10 Enterprise Embedded x64 German (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with german layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)

Recover

Item no.: 410358-0505-000

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)

Item Number: 410358-0505-000

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

USB 3.0 Card PCIe EX-11094 (O)

Recover

Item no.: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O)

Item Number: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O) - PCIe x1 USB 3.0 Interface EX-11094 - compatibel with PCIe x1, x4, x8 and x16 slots - Single Chip Controller with 4x USB 3.0 connectors - max. data transfer rate 1 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Recover

Item no.: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Item Number: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 pixel Brightness: 350 cd/m² Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.3, 2 x HDMI 2.2 Data connectors: 1 x USB Type C (upstream), 2 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 163 W, Typical 33 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 57.6 cm x 71.7 cm x 23 cm Weight incl. stand: 11 kg Ergonomic features: Tilt: -5°to +35°, Swivel: 344°, Height adjustable 14.9 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC, TCO Operating voltage: 100-120 V / 220-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Recover

Item no.: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Item Number: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O) Visible diagonal: 68.58 cm, 16:9 Max. resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 2.0 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 96 W, Typical 45 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.9 cm x 61.3 cm x 21.4 cm Weight: 8 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)

Recover

Item no.: 410350-2408-000

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)

Item Number: 410350-2408-000

Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Recover

Item no.: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Item Number: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Recover

Item no.: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Item Number: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA T1000 8 GB mDP (O)

Recover

Item no.: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O)

Item Number: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphic Card NVIDIA Quadro P4000 8GB DP (O)

Recover

Item no.: 410331-1800-000

Graphic Card NVIDIA Quadro P4000 8GB DP (O)

Item Number: 410331-1800-000

Graphic Card NVIDIA Quadro P4000 8GB DP (O) Professional graphic card for Workstation Premium - 8 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4 (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphic Card NVIDIA Quadro P400 2GB mDP (O)

Recover

Item no.: 410331-1700-000

Graphic Card NVIDIA Quadro P400 2GB mDP (O)

Item Number: 410331-1700-000

Graphic Card NVIDIA Quadro P400 2GB mDP (O) Professional graphic card for Workstation Premium - 2 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to three displays - Display outputs: 3 x DisplayPort 1.4 (mDP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro K620 2 GB DP/DVI (O)

Recover

Item no.: 410331-1400-000

Graphics Card NVIDIA Quadro K620 2 GB DP/DVI (O)

Item Number: 410331-1400-000

Graphics Card NVIDIA Quadro K620 2 GB DP/DVI (O) Professional graphics card for Compact Workstation - 2 GB DDR3 memory - PCI Express® 2.0 Interface x16 - Hardware acceleration of DirectX® 11.2 and OpenGL® 4.5 - Support for two displays (DH) - Display outputs: 1 x DisplayPort 1.2, 1 x Dual Link DVI - Dual Link DVI support for 1 x 30" Display (2560 x 1600 pixel) - DisplayPort support for 1 x 32" Display (3840 x 2160 pixel) - incl. DVI-DVI dual link cable (for 2 x 27" Display)

Item has been added to the configuration

Processor Intel Xeon W7-3455 (HP Z8 G5) (O)

Recover

Item no.: 410330-1200-000

Processor Intel Xeon W7-3455 (HP Z8 G5) (O)

Item Number: 410330-1200-000

Processor Intel Xeon W7-3455 (HP Z8 G5) (O) High performance processor configuration - Intel Xeon W7-3455 (2.5 GHz, 67.5 MB cache, 24 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Processor Intel Xeon W5-3425 (HP Z8 G5) (O)

Recover

Item no.: 410330-1100-000

Processor Intel Xeon W5-3425 (HP Z8 G5) (O)

Item Number: 410330-1100-000

Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Default processor configuration - Intel Xeon W5-3425 (3.2 GHz, 30 MB cache, 12 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O)

Recover

Item no.: 410324-1008-000

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O)

Item Number: 410324-1008-000

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O) - Data storage with high performance for data handling with high bandwidth requirement - Configured as RAID 0 for further increased performance, resulting capacity 8 TB - Maximum count per workstation: 1 - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O)

Recover

Item no.: 410324-1004-000

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O)

Item Number: 410324-1004-000

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O) - Data storage with high performance for data handling with high bandwidth requirement - Maximum count per workstation: 1 - only for 410203-9914-000 Microscopy Workstation Premium HP Z8Fury G5

Item has been added to the configuration

Hard Drive Extension to 20TB RAID10 (HP Z8 G5)

Recover

Item no.: 410324-0020-000

Hard Drive Extension to 20TB RAID10 (HP Z8 G5)

Item Number: 410324-0020-000

Hard Drive Extension to 20TB RAID10 (HP Z8 G5) - Extension of default RAID system - Increase capacity from 10 TB (RAID 1) to 20 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Hard Drive Extension 8TB RAID10 (hp Z6) (O)

Recover

Item no.: 410324-0008-000

Hard Drive Extension 8TB RAID10 (hp Z6) (O)

Item Number: 410324-0008-000

Hard Drive Extension 8TB RAID10 (hp Z6) (O) - Extension of default RAID system - Increase capacity from 4 TB (RAID 1) to 8 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth.

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

Harddisk 4 TB 7200 RPM SATA, additional (O)

Recover

Item no.: 410323-4000-000

Harddisk 4 TB 7200 RPM SATA, additional (O)

Item Number: 410323-4000-000

Harddisk 4 TB 7200 RPM SATA, additional (O)

Item has been added to the configuration

SSD 2 TB M.2 NVMe, additional (O)

Recover

Item no.: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O)

Item Number: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O) - data storage with high performance for data handling with high bandwidth requirement - maximum count per workstation: 1; 2nd SATA harddisk 8 TB required - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Solid-State-Drive SSD 256 GB M.2 (O)

Recover

Item no.: 410323-0250-000

Solid-State-Drive SSD 256 GB M.2 (O)

Item Number: 410323-0250-000

Solid-State-Drive SSD 256 GB M.2 (O) for performant handling of large files, e.g. driving detector systems at full bandwidth or processing of large datasets. This requires that the environment variable SWAP points to the SSD drive, thus ZEN creates the swap files there. - Capacity: 256 GB SSD - Maximum Read Transfer Rate: up to 2,15 GB/s - Maximum Write Transfer Rate: up to 1,20 GB/s - Requires one free M.2 slot

Item has been added to the configuration

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Recover

Item no.: 410303-6401-000

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Item Number: 410303-6401-000

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 64 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 256 GB (4 x 410303-6401-000), 512 GB (8 x 410303-6401-000) or 1024 GB (16 x 410303-6401-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 64 GB module - DDR4 2933 MHz ECC registered DIMM - can be extended to 128 GB (2 x 410303-6400-000), 256 GB (4 x 410303-6400-000) or 384 GB (6 x 410303-6400-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Recover

Item no.: 410303-3206-000

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Item Number: 410303-3206-000

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 32 GB modules - can be extended to 64 GB (2 x 410303-3205-000), 128 GB (4 x 410303- 3205-000) or 192 GB (6 x 410303-3205-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O)

Recover

Item no.: 410303-3204-000

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O)

Item Number: 410303-3204-000

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O) consisting of 1 x 32 GB modules

Item has been added to the configuration

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Recover

Item no.: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Item Number: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Recover

Item no.: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Item Number: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Premium (HP Z8 G5) (O)

Recover

Item no.: 410203-9914-000

Microscopy Workstation Premium (HP Z8 G5) (O)

Item Number: 410203-9914-000

Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 Rev. 2

Recover

Item no.: 410201-9914-000

Microscopy Workstation Compact HP Z2 G9 Rev. 2

Item Number: 410201-9914-000

Microscopy Workstation Compact HP Z2 G9 Rev. 2 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 / 192 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM BIOS selectable, default off - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 (O)

Recover

Item no.: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O)

Item Number: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact Core i5 multilingual (O)

Recover

Item no.: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O)

Item Number: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O) - HP Z240 Tower Workstation - CPU: Intel® CoreTM i5-6500 3.2 GHz 6 MB / 2133 MHz - Chipset: Intel® C236 - Memory: max. 64 GB RAM - Memory Expansion Slots: 4 x DDR3-RAM modules / 2133 MHz unbuffered, non-ECC - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 (x16 mechanical) 1 x PCI Express Generation 3 x4 1 x PCI Express Generation 3 x1 1 M.2 slot (PCIe Gen3 x4) - Graphics interface onboard: Intel® HD Graphics 530 2 x Display Port 1.2 (max. 3840 x 2160 pixel), 1 x DVI-D single link (max. 1920 x 1200 pixel) - Hard Drives: 1 x 4 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: Integrated 10/100/1000 LAN interface - I/O: 1 x serial RS232, 6 x USB 3.0 (2 x front, 4 x rear), 4 x USB 2.0 (2 x front, 2 x rear), PS/2 for keyboard and mouse - Certifications & Declarations: CE, CSA, UL, FCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 400 W with country specific plug - Chassis Dimensions: (H x W x D): 399 x 170 x 442 mm, approx. 10 kg - Rescue kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System Configuration 4 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-592

System Configuration 4 for HP Z8 G5 (O)

Item Number: 000000-2615-592

System Configuration 4 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - With Installation of ZEN Software for Lightsheet Systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System Configuration 3 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-591

System Configuration 3 for HP Z8 G5 (O)

Item Number: 000000-2615-591

System Configuration 3 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 880 and Elyra Systems (ZEN black) - only for 410203-9914-000 Microscopy Workstation PremiumHP Z8 FuryG5

Item has been added to the configuration

System Configuration 2 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-590

System Configuration 2 for HP Z8 G5 (O)

Item Number: 000000-2615-590

System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System Configuration 1 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-589

System Configuration 1 for HP Z8 G5 (O)

Item Number: 000000-2615-589

System Configuration 1 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System Configuration 5d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O)

Item Number: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 800, LSM 800 MPLX Upgr., LSM 900, LSM 980, Elyra 7, Celldiscoverer 7, Axioscan 7, Lattice Lightsheet 7 and Widefield Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 4d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O)

Item Number: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for Lightsheet Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 3d for Z6 G4 (O)

Recover

Item no.: 000000-2561-499

System Configuration 3d for Z6 G4 (O)

Item Number: 000000-2561-499

System Configuration 3d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 700, LSM 780, LSM 880 and Elyra Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 1d for Z6 G4 (O)

Recover

Item no.: 000000-2548-757

System Configuration 1d for Z6 G4 (O)

Item Number: 000000-2548-757

System Configuration 1d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Without ZEN Software Installation - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

ystem Configuration 3 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-755

ystem Configuration 3 for HP Z2 G9 (O)

Item Number: 000000-2548-755

System Configuration 3 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 700 Systems - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 2 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O)

Item Number: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 1 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O)

Item Number: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Recover

Item no.: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Item Number: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O) Installation of Windows 10 Enterprise LTSB 2016 x64 Highend incl. Windows 10 license Installation of ZEN software for LSM 900, LSM 980, Elyra 7, Celldiscoverer 7 and Widefieldsystems Only for Microscopy Workstation Premium hp Z6 G4 Rev. 2 (410203-9912-000)

Item has been added to the configuration

System configuration 1 Image with OS for HP Z6 (O)

Recover

Item no.: 000000-2307-666

System configuration 1 Image with OS for HP Z6 (O)

Item Number: 000000-2307-666

System configuration 1 Image with OS for HP Z6 (O) Installation of Windows 10 IoT Enterprise 2016 LTSB Embedded x64 Highend Master Image incl. Windows 10 license System configuration 1 (HP Z6 Basic)

Memory

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Recover

Item no.: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Item Number: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O) consisting of 1 x 16 GB module

Software for image processing (146)

arivis SMA

Item has been added to the configuration

ZEISS arivis Cloud Institute 1 year license: DL Training

Recover

Item no.: 410154-5011-101

ZEISS arivis Cloud Institute 1 year license: DL Training

Item Number: 410154-5011-101

ZEISS arivis Cloud Institute 1 year license: DL Training The arivis Cloud Institute License is valid for one year, includes 10 arivis Cloud accounts and is restricted to academic customers. The 10 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud Department 1 year license: DL Training

Recover

Item no.: 410154-5010-101

ZEISS arivis Cloud Department 1 year license: DL Training

Item Number: 410154-5010-101

ZEISS arivis Cloud Department 1 year license: DL Training The arivis Cloud Department License is valid for one year, includes 5 arivis Cloud accounts and is restricted to academic customers. The 5 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud Lab 1 year license: DL Training

Recover

Item no.: 410154-5009-101

ZEISS arivis Cloud Lab 1 year license: DL Training

Item Number: 410154-5009-101

ZEISS arivis Cloud Lab 1 year license: DL Training The arivis Cloud Lab License is valid for one year, includes 3 arivis Cloud accounts and is restricted to academic customers. The 3 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

ZEISS arivis Cloud 1 year Industry

Recover

Item no.: 410145-3035-100

ZEISS arivis Cloud 1 year Industry

Item Number: 410145-3035-100

arivis Cloud 1 year Industry The arivis Cloud Industry License is valid for one year, includes 1 arivis Cloud account and is restricted to industry customers. It contains: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

arivis Cloud 1 year Academia

Recover

Item no.: 410145-3034-100

arivis Cloud 1 year Academia

Item Number: 410145-3034-100

arivis Cloud 1 year Academia The arivis Cloud Academia License is valid for one year, includes 2 arivis Cloud accounts and is restricted to academic customers. The 2 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

ZEN modules image recording

Item has been added to the configuration

ZEN desk subscription - Campus

Recover

Item no.: 410140-7004-310

ZEN desk subscription - Campus

Item Number: 410140-7004-310

ZEN desk subscription - Campus Yearly subscription "Campus" for 25 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floatinglicences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-onPCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Institute

Recover

Item no.: 410140-7003-310

ZEN desk subscription - Institute

Item Number: 410140-7003-310

ZEN desk subscription - Institute Yearly subscription "Institue" for 10 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN ToolkitAI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Department

Recover

Item no.: 410140-7002-310

ZEN desk subscription - Department

Item Number: 410140-7002-310

ZEN desk subscription - Department Yearly subscription "Department" for 5 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3Dviewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCSAdd-on PCH ZEN Module SMLM ZEN Module Airyscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN desk subscription - Lab

Recover

Item no.: 410140-7001-310

ZEN desk subscription - Lab

Item Number: 410140-7001-310

ZEN desk subscription - Lab Yearly subscription "Lab" for 3 ZEN desk software users/ clients including access to all Toolkits and special features for offline processing and analysis without microscope and camera control. Fixed bundle of floating licences - individual Toolkits or functions cannot be used separately. Regular version updates included. Subscriptions renew after 1 year for a further year. The following functions and toolkits are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client Toolkits and special features ZEN Toolkit 2D ZEN Toolkit AI ZEN Toolkit Connect ZEN Toolkit Developer ZEN Toolkit 3D ZEN Toolkit Deconvolution ZEN Toolkit Molecular Quant. ZEN Toolkit Bio Apps ZEN M. FCS+FCCS Add-on Extended ZEN M. Counting Add-on FCS+FCCS ZEN M. FCS+FCCS Add-on PCH ZEN Module SMLM ZEN ModuleAiryscan ZEN Module Counting + Basic FCS ZEN Module EM Processing ZEN Module Lattice SIM ZEN Module LSM Plus ZEN Module Airyscan joint DCV ZEN Module Lightsheet 7 processing ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Advanced

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-310

ZEN Toolkit Bio Apps

Item Number: 410136-0175-310

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio App tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2Dfixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8 GB GPU and 64 GB RAM. Only CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-380

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-380

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN 3.9 desk floating license

Recover

Item no.: 410135-2004-390

ZEN 3.9 desk floating license

Item Number: 410135-2004-390

ZEN 3.9 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk floating license

Recover

Item no.: 410135-2004-380

ZEN 3.8 desk floating license

Item Number: 410135-2004-380

ZEN 3.8 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.10 desk floating license

Recover

Item no.: 410135-2004-310

ZEN 3.10 desk floating license

Item Number: 410135-2004-310

ZEN 3.10 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9 desk

Recover

Item no.: 410135-0004-390

ZEN 3.9 desk

Item Number: 410135-0004-390

ZEN 3.9 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk

Recover

Item no.: 410135-0004-380

ZEN 3.8 desk

Item Number: 410135-0004-380

ZEN 3.8 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.10 desk

Recover

Item no.: 410135-0004-310

ZEN 3.10 desk

Item Number: 410135-0004-310

ZEN 3.10 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9

Recover

Item no.: 410135-0002-390

ZEN 3.9

Item Number: 410135-0002-390

ZEN 3.9 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.8

Recover

Item no.: 410135-0002-380

ZEN 3.8

Item Number: 410135-0002-380

ZEN 3.8 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.10

Recover

Item no.: 410135-0002-310

ZEN 3.10

Item Number: 410135-0002-310

ZEN 3.10 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN core SMA

Item has been added to the configuration

SMA Fee ZEN core with Motorized Acquisition 1 year

Recover

Item no.: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year

Item Number: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Acquisition and all hardware- related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Item has been added to the configuration

SMA Fee ZEN analyzer 1 year

Recover

Item no.: 410139-0035-000

SMA Fee ZEN analyzer 1 year

Item Number: 410139-0035-000

SMA Fee ZEN analyzer 1 year Entitlement to upgrade ZEN analyzer free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN analyzer. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN analyzer configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band A-B") must be included: - AI Toolkit ("SMA ZEN Band B") - 2D Toolkit ("SMA ZEN Band A") - 3D Toolkit ("SMA ZEN Band A") - Connect Toolkit ("SMA ZEN Band A") - Materials Apps ("SMA ZEN Band A") - TCA Modul ("SMA ZEN Band A") - NMI Modul ("SMA ZEN Band A") - Developer Toolkit ("SMA ZEN Band A") - GxP Toolkit ("SMA ZEN Band A")

Item has been added to the configuration

SMA Fee ZEN core 1 year

Recover

Item no.: 410139-0011-000

SMA Fee ZEN core 1 year

Item Number: 410139-0011-000

SMA Fee ZEN core 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Focus Acquisition and all hardware-related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

ZEN Modules image analysis

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.9

Recover

Item no.: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9

Item Number: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.8

Recover

Item no.: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8

Item Number: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.10

Recover

Item no.: 410138-5004-310

Upgrade ZEN band D toolkits to ZEN 3.10

Item Number: 410138-5004-310

Upgrade ZEN band D toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.9

Recover

Item no.: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9

Item Number: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.8

Recover

Item no.: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8

Item Number: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.10

Recover

Item no.: 410138-5003-310

Upgrade ZEN band C toolkits to ZEN 3.10

Item Number: 410138-5003-310

Upgrade ZEN band C toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.9

Recover

Item no.: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9

Item Number: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.8

Recover

Item no.: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8

Item Number: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.10

Recover

Item no.: 410138-5002-310

Upgrade ZEN band B toolkits to ZEN 3.10

Item Number: 410138-5002-310

Upgrade ZEN band B toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.9

Recover

Item no.: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9

Item Number: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.8

Recover

Item no.: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8

Item Number: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.10

Recover

Item no.: 410138-5001-310

Upgrade ZEN band A toolkits to ZEN 3.10

Item Number: 410138-5001-310

Upgrade ZEN band A toolkits to ZEN 3.10 Upgrade of optional ZEN toolkits to ZEN 3.10 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.10 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Recover

Item no.: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Item Number: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.9 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Recover

Item no.: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Item Number: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic Upgrade of an existing ZEN desk Floating License to ZEN 3.8 desk Floating License Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.10 desk Floating License

Recover

Item no.: 410138-2104-310

Upgrade ZEN desk to ZEN 3.10 desk Floating License

Item Number: 410138-2104-310

Upgrade ZEN desk to ZEN 3.10 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.10 desk. Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Recover

Item no.: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Item Number: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Recover

Item no.: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Item Number: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10

Recover

Item no.: 410138-0173-310

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10

Item Number: 410138-0173-310

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Recover

Item no.: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Item Number: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Recover

Item no.: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Item Number: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10

Recover

Item no.: 410138-0166-310

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10

Item Number: 410138-0166-310

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Advanced Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of theoptional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Recover

Item no.: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Item Number: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Recover

Item no.: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Item Number: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10

Recover

Item no.: 410138-0165-310

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10

Item Number: 410138-0165-310

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 including ZEN Motorized Acquisition toolkit. Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit,Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Recover

Item no.: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Item Number: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.9 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Recover

Item no.: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Item Number: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.8 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or newer does not require this item.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk

Recover

Item no.: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk

Item Number: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk Upgrade of an existing ZEN desk software to ZEN 3.9 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.8 desk

Recover

Item no.: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk

Item Number: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk Upgrade of an existing ZEN desk software to ZEN 3.8 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.10 desk

Recover

Item no.: 410138-0104-310

Upgrade ZEN desk to ZEN 3.10 desk

Item Number: 410138-0104-310

Upgrade ZEN desk to ZEN 3.10 desk Upgrade of an existing ZEN desk software to ZEN 3.10 desk. Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.9

Recover

Item no.: 410138-0102-390

Upgrade ZEN to ZEN 3.9

Item Number: 410138-0102-390

Upgrade ZEN to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.8

Recover

Item no.: 410138-0102-380

Upgrade ZEN to ZEN 3.8

Item Number: 410138-0102-380

Upgrade ZEN to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade of an existing ZEN software to ZEN 3.10

Recover

Item no.: 410138-0102-310

Upgrade of an existing ZEN software to ZEN 3.10

Item Number: 410138-0102-310

Upgrade ZEN to ZEN 3.10 Upgrade of an existing ZEN software to ZEN 3.10 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.10 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit

Image processing 3rd Party SW

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9 Floating License

Recover

Item no.: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License

Item Number: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.9 Floating License Note: The upgrade consists only of the ZEN analyzer 3.9 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8 Floating License

Recover

Item no.: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License

Item Number: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.8 Floating License Note: The upgrade consists only of the ZEN analyzer 3.8 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.10 Floating Licens

Recover

Item no.: 410138-2135-310

Upgrade to ZEN analyzer 3.10 Floating Licens

Item Number: 410138-2135-310

Upgrade to ZEN analyzer 3.10 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.10 Floating License Note: The upgrade consists only of the ZEN analyzer 3.10 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.10 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9 with Motorized Acquisition

Recover

Item no.: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition

Item Number: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.9 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8 with Motorized Acquisition

Recover

Item no.: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition

Item Number: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.8 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9

Recover

Item no.: 410138-0135-390

Upgrade to ZEN analyzer 3.9

Item Number: 410138-0135-390

Upgrade to ZEN analyzer 3.9 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.9 Note: The upgrade consists only of the ZEN analyzer 3.9 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8

Recover

Item no.: 410138-0135-380

Upgrade to ZEN analyzer 3.8

Item Number: 410138-0135-380

Upgrade to ZEN analyzer 3.8 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.8 Note: The upgrade consists only of the ZEN analyzer 3.8 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.10

Recover

Item no.: 410138-0135-310

Upgrade to ZEN analyzer 3.10

Item Number: 410138-0135-310

Upgrade to ZEN analyzer 3.10 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.10 Note: The upgrade consists only of the ZEN analyzer 3.10 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.10 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9

Recover

Item no.: 410138-0111-390

Upgrade to ZEN core 3.9

Item Number: 410138-0111-390

Upgrade to ZEN core 3.9 Upgrade of an existing ZEN core software version to ZEN core 3.9 Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8

Recover

Item no.: 410138-0111-380

Upgrade to ZEN core 3.8

Item Number: 410138-0111-380

Upgrade to ZEN core 3.8 Upgrade of an existing ZEN core software version to ZEN core 3.8 Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.10

Recover

Item no.: 410138-0111-310

Upgrade to ZEN core 3.10

Item Number: 410138-0111-310

Upgrade to ZEN core 3.10 Upgrade of an existing ZEN core software version to ZEN core 3.10 Note: The package consists of the ZEN core 3.10 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.10 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Transfer ZEN to ZEN core 3.9

Recover

Item no.: 410138-0011-390

Transfer ZEN to ZEN core 3.9

Item Number: 410138-0011-390

Transfer ZEN to ZEN core 3.9 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.9 Consisting of: - ZEN core 3.9 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.8

Recover

Item no.: 410138-0011-380

Transfer ZEN to ZEN core 3.8

Item Number: 410138-0011-380

Transfer ZEN to ZEN core 3.8 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.8 Consisting of: - ZEN core 3.8 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.10

Recover

Item no.: 410138-0011-310

Transfer ZEN to ZEN core 3.10

Item Number: 410138-0011-310

Transfer ZEN to ZEN core 3.10 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.10 Consisting of: - ZEN core 3.10 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

ZEN Module Data Management

Item has been added to the configuration

Upgrade ZEN Data Explorer Viewer

Recover

Item no.: 410138-0931-360

Upgrade ZEN Data Explorer Viewer

Item Number: 410138-0931-360

Upgrade ZEN Data Explorer Viewer Conversion of an existing ZEN Data Storage Server License (Version 22.40 or older) into a license compatible with version 23.xx (or higher). The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. The newly integrated viewer, based on server side rendering, significantly enhances the display performance which is mainly reflected in the fast display of large and very large image files. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version: 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android Version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

Item has been added to the configuration

ZEN Data Storage Server

Recover

Item no.: 410135-0031-360

ZEN Data Storage Server

Item Number: 410135-0031-360

ZEN Data Storage Server Database for storage and multi-client access of documents on a centralized server. ZEN applications can connect to the server as clients to store and retrieve data. ZEN Data Storage provides a client-server database solution for microscopy customers who deal with the storage of large amounts of data originating from one or several microscopes. ZEN Data Storage allows the exchange of data and workflows and supports microscopists who want to separate image acquisition from post-acquisition work. In this way it also facilitates correlative workflows where the data of a sample can be accessed from a centralized location. "Server side rendering" based display enables the user to visualize also very large files in a fast and seamless way. The centralized ZEN Data Storage enables IT managers to ensure data security and backup availability. It allows to manage users and user rights within a laboratory or even across multiple sites. Main features: - Scalable server database solution based on MS-SQL server - Integration into existing server landscape possible - Multi-client concurrent access to data - Server based user and access management - Integration of user management with Active Directory possible - Data access management on user and group level (ZEN blue only) - Full archive integration for ZEN core including storage of documents and templates - Optional: Compatible with ZEN Module GxP in ZEN core The package includes: ZEN Data Explorer - browser or app based client which allows access and viewing of the data stored on the ZEN Data Storage. Main features: - Gallery for browsing, grouping and searching of data - Viewer for images and ZEN Connect projects - Basic annotation functionality - Upload of images and camera snapshots (app version only) - Download and Snapshot functionality - Available in Browser or as app for iOS and Android ZEN Data Storage Uploader - upload tool which monitors a drop folder and uploads and if needed converts the files to CZI. Supported files types CZI, ZVI, Leica LIF, Nikon ND2, Olympus TIF, PDF The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

ZEN core Platform change

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.9

Recover

Item no.: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9

Item Number: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.9. Consisting of: - ZEN core 3.9 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.8

Recover

Item no.: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8

Item Number: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.8. Consisting of: - ZEN core 3.8 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.10

Recover

Item no.: 410138-0911-310

Platform Change AV 4.x.x to ZEN core 3.10

Item Number: 410138-0911-310

Platform Change AV 4.x.x to ZEN core 3.10 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.10. Consisting of: - ZEN core 3.10 basic license - entitles to purchase ZEN Toolkits with a discount

ZEN modules image processing

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.9

Recover

Item no.: 410138-0902-390

Platform change AV 4.x to ZEN 3.9

Item Number: 410138-0902-390

Platform change AV 4.x to ZEN 3.9 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.9 Consisting of: - ZEN 3.9 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.8

Recover

Item no.: 410138-0902-380

Platform change AV 4.x to ZEN 3.8

Item Number: 410138-0902-380

Platform change AV 4.x to ZEN 3.8 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.8 Consisting of: - ZEN 3.8 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.10

Recover

Item no.: 410138-0902-310

Platform change AV 4.x to ZEN 3.10

Item Number: 410138-0902-310

Platform change AV 4.x to ZEN 3.10 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.10 Consisting of: - ZEN 3.10 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

SW Platform Change desk for Lattice SIM

Recover

Item no.: 410137-9133-310

SW Platform Change desk for Lattice SIM

Item Number: 410137-9133-310

SW Platform Change desk for Lattice SIM required for ELYRA 7 S, ELYRA 7 LS & ELYRA 7 eLS

Item has been added to the configuration

SW Platform Change desk for SMLM

Recover

Item no.: 410137-9041-310

SW Platform Change desk for SMLM

Item Number: 410137-9041-310

SW Platform Change desk for SMLM required for ELYRA 7 L, ELYRA 7 LS

Item has been added to the configuration

SW Platform Change for Lattice SIM

Recover

Item no.: 410136-9133-310

SW Platform Change for Lattice SIM

Item Number: 410136-9133-310

SW Platform Change for Lattice SIM required for ELYRA 7 S, ELYRA 7 LS & ELYRA 7 eLS

Item has been added to the configuration

SW Platform Change for SMLM

Recover

Item no.: 410136-9041-310

SW Platform Change for SMLM

Item Number: 410136-9041-310

SW Platform Change for SMLM required for ELYRA 7 L, ELYRA 7 LS

ZEN Module Image Analysis

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Advanced

Recover

Item no.: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced

Item Number: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced ZEN Module Dynamics Profiler Advanced for ZEN desk with additional flow- and diffusion analysis functionality. The ZEN desk Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN desk Module Lattice SIM

Recover

Item no.: 410137-0133-390

ZEN desk Module Lattice SIM

Item Number: 410137-0133-390

ZEN desk Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods.

Item has been added to the configuration

ZEN desk Module SMLM

Recover

Item no.: 410137-0041-390

ZEN desk Module SMLM

Item Number: 410137-0041-390

ZEN desk Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-310

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-310

ZEN Toolkit Bio Apps Floating License Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps the one, that fits your application. Simply adapt the preconfigured Bio App with just a few clicks to your data if necessary. The Toolkit provides the following Bio Apps: - Cell counting: quantify fluorescently labeled nuclei - Confluency: quantify the area covered by cells - Gene- and protein expression: quantify gene and protein expression levels - Automated spot detection: count and quantify spots inside cell nuclei and/or cytoplasm - Translocation: quantify the intensity ratio between cytoplasm and cell nuclei Make use of fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a deep learning model trained on arivis Cloud for semantic or instance segmentation in the Bio App. In the dedicated result view, the segmented images are displayed along with customized results tables and diagrams to give you a quick overview of your sample. Tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with a Bio Aps tailored to your application - Predefined parameters allow for easy operation - Choose between fast classical segmentation or powerful AI-models for challenging segmentation tasks: use AI models trained with the ZEN Toolkit AI or deep learning models trained on arivis Cloud with semantic or instance* segmentation (*not for Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of ZeissPython. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported. The floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Lattice SIM floating license

Recover

Item no.: 410136-2133-390

ZEN Module Lattice SIM floating license

Item Number: 410136-2133-390

ZEN Module Lattice SIM floating license ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module SMLM floating license

Recover

Item no.: 410136-2041-390

ZEN Module SMLM floating license

Item Number: 410136-2041-390

ZEN Module SMLM floating license The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Spectral RICS

Recover

Item no.: 410136-0182-390

ZEN Module Spectral RICS

Item Number: 410136-0182-390

ZEN Module Spectral RICS Single-molecule analysis based on raster image correlation spectroscopy. The calculation of CPM (Counts per Molecule) values allows the optimization of the hardware settings for the experiment. The calibration step with known dye solutions defines the confocal volume for quantitative data. Images of several different fluorescently labeled molecules can be clearly separated into image channels using single spectra. The typical crosstalk of the signals into other channels is thus resolved, which enables the calculation of correlations of different molecules to each other (cross-correlation). For analysis, regions in the image can be defined and threshold values can be set. Analysis masks can be created based on image regionsof the same image or a different image. The analysis uses a model of the three-dimensional diffusion of a single molecule. There are three different representations of the analysis to choose from: threshold-based standard analysis, Grid-based heatmap and Intensity-based heat map. In addition to the diffusion velocities, various other result parameters are summarized in a table.

Item has been added to the configuration

ZEN Toolkit 3D

Recover

Item no.: 410136-0172-360

ZEN Toolkit 3D

Item Number: 410136-0172-360

ZEN Toolkit 3D Unlock the full 3D potential with the Toolkit 3D. Equip yourself with a collection of rendering methods, tools for sophisticated visualization and data navigation as well as 3D image analysis. The 3D Toolkit offers multiple types of rendering methods allowing you to choose the visualization that best fits your application. A sophisticated 3D rendering can be overwhelming when exploring a data set. With the viewer available with ZEN 3D Toolkit, 3D and 2D views are placed side-by-side so you may navigate in the 3D space seamless through your sample. Analyze your 3D data – a user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Segmentation is AI-ready: load your Intellesis models or segment object based on thresholding. The resulting objects are visualized in 3D in glass or opaque mode. The measurements include various geometric and intensity measurements, as well as user-defined measurement parameters* which can be sorted and exported. The 3D viewer requires a dedicated up-to-date graphics card with full OpenGL 4.3+ support. Older AMD graphic cards such as AMD FirePro V4900 1GB or ATI FirePro V5800 1GB are not supported any longer. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit 2D

Recover

Item no.: 410136-0168-360

ZEN Toolkit 2D

Item Number: 410136-0168-360

ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Module SMLM

Recover

Item no.: 410136-0041-390

ZEN Module SMLM

Item Number: 410136-0041-390

ZEN Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Special acquisition modalities allow 3- dimensional acquisition via a phase ramp, as well as iterative sequential excitation of two differently labeled molecules.

ZEN modules image acquisition

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Basic

Recover

Item no.: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic

Item Number: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic for ZEN desk with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced Floating License

Recover

Item no.: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License

Item Number: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License ZEN Module Dynamics Profiler Advanced Floating License with additional flow- and diffusion analysis functionality. The Module Dynamics Profiler Basic Floating License is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-2178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-2178-380

ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic Floating License with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Technical Cleanliness Analysis Floating License

Recover

Item no.: 410136-2128-350

ZEN Module Technical Cleanliness Analysis Floating License

Item Number: 410136-2128-350

ZEN Module Technical Cleanliness Analysis Floating License Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-V): (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with AI-based object classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Training of the delivered machine learning models requires in addition ZEN Toolkit AI . (IV) light microscope workflow for correlative technical cleanliness analysis (component and oil cleanliness) with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Toolkit Connect . (V) light microscope workflow for correlative component cleanliness analysis with AI-based object classification. Contains trainable, pre- trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires ZEN Toolkit Connect. Training of the delivered machine learning models requires in addition ZEN Toolkit AI. The job templates cover image acquisition, image analysis and image processing, result presentation ininteractive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan floating license

Recover

Item no.: 410136-2064-380

ZEN Module Airyscan floating license

Item Number: 410136-2064-380

ZEN Module Airyscan floating license Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format. Floating license allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced

Recover

Item no.: 410136-0179-380

ZEN Module Dynamics Profiler Advanced

Item Number: 410136-0179-380

ZEN Module Dynamics Profiler Advanced Dynamics Profiler Advanced enables to collect unique molecular characteristics of fluorescently labelled proteins or other molecules. Using the individual detector elements of the Airyscan detector, specific fluorescence correlation spectroscopy (FCS) techniques provide additional area-based information. In addition to classic FCS parameters (see SW ZEN Module Dynamics Profiler Basic) every measurement includes the opportunity to analyze a) Dynamics with pair correlation to investigate e.g., diffusion barriers and b) active flow providing speed in µm/s and its direction. The Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-0178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-0178-380

ZEN Module Dynamics Profiler Basic Dynamics Profiler allows to gather details of the molecular characteristics of living samples – providing concentration and dynamics information of fluorescently labelled molecules. Expanding the capability of the Airyscan detector and utilizing the area information gathered from 32 circular arranged detection elements for fluorescence correlation spectroscopy (FCS). Data acquisition is guided by a wizard which serves both simplicity and usability. Using the context of a reference image up to 10 measurement spots can be obtained consecutively and analyzed by various fit models. Additionally, the Raw data of all Airyscan detection elements can be exported and used for individual analysis.

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in thecamera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-380

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-380

ZZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Connect

Recover

Item no.: 410136-0170-360

ZEN Toolkit Connect

Item Number: 410136-0170-360

ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Smart Acquisition

Recover

Item no.: 410136-0167-360

ZEN Toolkit Smart Acquisition

Item Number: 410136-0167-360

ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-390

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-390

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-380

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-380

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drivebacklash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-310

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-310

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980). Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field - Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-390

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-390

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-310

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-310

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light -definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Materials Apps

Recover

Item no.: 410136-0162-350

ZEN Toolkit Materials Apps

Item Number: 410136-0162-350

ZEN Toolkit Materials Apps This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximum diameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 6394 2002 - Non-metallic inclusions (NMI): GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004

Item has been added to the configuration

ZEN Module Lattice SIM

Recover

Item no.: 410136-0133-390

ZEN Module Lattice SIM

Item Number: 410136-0133-390

ZEN Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods

Item has been added to the configuration

ZEN Module Technical Cleanliness Analysis

Recover

Item no.: 410136-0128-350

ZEN Module Technical Cleanliness Analysis

Item Number: 410136-0128-350

ZEN Module Technical Cleanliness Analysis Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness, air cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059,VDA 19.2, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-V): Workflow Creator Wizard for application guided selection and auto-generation of the following job templates for technical cleanliness analysis: - The workflows I - III are operable with acquired or loaded images. - The correlative workflows IV - V require image acquisition. (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with AI-based object classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Training of the delivered machine learning models requires ZEN Toolkit AI . (IV) light microscope workflow for correlative technical cleanliness analysis (component and oil cleanliness) with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Toolkit Connect. (V) light microscope workflow for correlative component cleanliness analysis with AI-based object classification. Contains trainable, pre- trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Training of the delivered machine learning models requires ZEN Toolkit AI. Requires in addition ZEN Toolkit Connect. The job templates cover image acquisition, image analysis and image processing, result presentation in interactive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data. (VI) post analysis workflow from archived data for calculation and interpretation of results to monitor air particles using particle traps supporting VDA 19.2 The job templates cover image acquisition, image analysis and image processing, result presentation in interactive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data.

Item has been added to the configuration

ZEN Modul FLIM Applikation

Recover

Item no.: 410136-0111-380

ZEN Modul FLIM Applikation

Item Number: 410136-0111-380

ZEN module FLIM Application • For seamless acquisition of multidimensional FLIM experiments (time series, z-stacks) in ZEN blue • Works only in combination with the FLIM Upgrade Kit from PicoQuant • Definition of experiment duration, file name and structure for reproducible data • FLIM laser power control • Display and transfer of all relevant META data (e.g., objective, pixel time, z position, time point) to the PicoQuant software • Straightforward FLIM data analysis in the SymPhoTime software from PicoQuant

Item has been added to the configuration

ZEN Module Airyscan

Recover

Item no.: 410136-0064-380

ZEN Module Airyscan

Item Number: 410136-0064-380

ZEN Module Airyscan Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

ZEN image processing modules

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-380

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-380

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

ZEN Basic Software

Item has been added to the configuration

ZEN Toolkit 3D Floating License

Recover

Item no.: 410136-2172-360

ZEN Toolkit 3D Floating License

Item Number: 410136-2172-360

ZEN Toolkit 3D Floating License This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer Floating License

Recover

Item no.: 410136-2171-360

ZEN Toolkit Developer Floating License

Item Number: 410136-2171-360

ZEN Toolkit Developer Floating License Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Connect Floating License

Recover

Item no.: 410136-2170-360

ZEN Toolkit Connect Floating License

Item Number: 410136-2170-360

ZEN Toolkit Connect Floating License This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy* - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*motorized stage required) (**not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 2D Floating License

Recover

Item no.: 410136-2168-360

ZEN Toolkit 2D Floating License

Item Number: 410136-2168-360

ZEN Toolkit 2D Floating License Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze imagedata. The wizard provides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally to classical segmentation methods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. After running the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belonging to the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit GxP Floating License

Recover

Item no.: 410136-2163-350

ZEN Toolkit GxP Floating License

Item Number: 410136-2163-350

ZEN Toolkit GxP Floating License The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process Floating License allows the flexible usage of the license on different clients within a networkenvironment.

Item has been added to the configuration

ZEN Toolkit Materials Apps Floating License

Recover

Item no.: 410136-2162-350

ZEN Toolkit Materials Apps Floating License

Item Number: 410136-2162-350

ZEN Toolkit Materials Apps Floating License This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximumdiameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 63942002 - Non-metallic inclusions (NMI): ISO4967:2013; GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004 Floating License allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.5 Floating License

Recover

Item no.: 410135-2035-350

ZEN analyzer 3.5 Floating License

Item Number: 410135-2035-350

ZEN analyzer 3.5 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - APEER (on-site) connectorenables the execution of customized solutions by integrating modules from the APEER platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN starter basic software (O)

Recover

Item no.: 410135-1010-000

ZEN starter basic software (O)

Item Number: 410135-1010-000

ZEN starter basic software (O) ZEN starter with basic functionality and user interface of ZEN core. Drivers for Axiocam cameras and image acquisition (SNAPs). No microscope control. - Configurable graphical user interface including workbench concept - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - Panorama for acquisition of Tiles Images with manual stage - Online Panorama for creation of stitched images on un-coded/ un- motorized stages - Video recorder functionality with movie export functionality - Manual Extended Focus (EDF) capability - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements and text annotations - Using of Microsoft Word report templates - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - Can only be extended with ZEN Toolkit Basic Acquisition and ZEN Module Coded Microscope Differences compared with ZEN core: - No microscope control - Limited image processing functions - No Job functionality - No HDR -Acquisition of High Dynamic Range Images Supported operating systems: Windows 10 (64-Bit)/ Windows 11

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI Floating License

Recover

Item no.: 410136-2169-380

ZEN Toolkit AI Floating License

Item Number: 410136-2169-380

ZEN Toolkit AI Floating License Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN andZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative toan own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. The floating license allows the flexible use of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer

Recover

Item no.: 410136-0171-360

ZEN Toolkit Developer

Item Number: 410136-0171-360

ZEN Toolkit Developer Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated workflows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core)

Item has been added to the configuration

ZEN Toolkit GxP

Recover

Item no.: 410136-0163-350

ZEN Toolkit GxP

Item Number: 410136-0163-350

ZEN Toolkit GxP The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process.

Labscope modules

Item has been added to the configuration

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Recover

Item no.: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Item Number: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D) consisting of the camera Axiocam 305 color and the Labscope Module Fast Panorama. Camera specification: Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V(ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulationrequired Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or later, ZEN core v2.5 or later Labscope v3.3 or later (Windows) The required software is available via the ZEISS Download Center.

Item has been added to the configuration

Labscope Module AI Cell Counting DLic

Recover

Item no.: 410136-0150-430

Labscope Module AI Cell Counting DLic

Item Number: 410136-0150-430

Labscope Module AI Cell Counting DLic The Labscope module AI Cell Counting is an AI based solution that automatically determines the number of adherent cells in the field of view. It does also support cell nuclei counting in fluorescence. It delivers repeatable, objective results and does not require manual parameter adjustments. - push-button solution - analysis result within seconds - works for live images and stored images - accumulation of multiple images possible - fluorescence based cell nuclei counting is applicable in Manual, Auto and Repeat modes of multichannel acquisition - numeric and visual result Observation type: Primarily optimized for phase contrast images of adherent cell cultures, and fluorescently stained cell nuclei.

Item has been added to the configuration

Labscope Module AI Cell Confluency DLic

Recover

Item no.: 410136-0149-100

Labscope Module AI Cell Confluency DLic

Item Number: 410136-0149-100

Labscope Module AI Cell Confluency DLic The Labscope module AI Cell Confluency is an AI based solution that automatically determines the confluency level of the adherent cell culture. It delivers repeatable, objective results and does not require manual parameter adjustments. - push-button solution - analysis result within seconds - works for live images and stored images - accumulation of multiple images possible - numeric and visual result Observation type: Primarily optimized for phase contrast images of adherent cell cultures

Item has been added to the configuration

Labscope Module Fast Panorama DLic

Recover

Item no.: 410136-0130-100

Labscope Module Fast Panorama DLic

Item Number: 410136-0130-100

Labscope Module Fast Panorama DLic The Labscope module Fast Panorama allows the easy acquisition of whole slide images (WSI) with manual microscopes. By manually moving the stage, images of the specimen will be stitched together automatically into a panoramic image. - flexible in sample - flexible in magnification and objective class - flexible in contrast methods - shading correction - improved stitching - position search function Notice: Currently the function works with ZEISS Axiocam305 only. FL (fluorescence light) mode is not suitable for Fast Panorama acquisition. The required PC spec: i5 (8th Gen) quad-core @3.0GHz or above; 8GB RAM or above.

Item has been added to the configuration

Labscope Module Multi Channel DLic

Recover

Item no.: 410136-0129-100

Labscope Module Multi Channel DLic

Item Number: 410136-0129-100

Labscope Module Multi Channel DLic The Labscope module Multi Channel Fluorescence (MCF) provides an easy solution for acquisition of fluorescence and transmitted light images in independent channels. - acquisition of up to 4 fluorescence channels + 1transmitted light channel - smart fluorescence channel overwrite - easy fluorescence channels setup with manual microscopes - compatibility with Smart Microscopy - multichannel view including image processing - report generation with MCF images

Item has been added to the configuration

Labscope Teacher 2.0

Recover

Item no.: 410135-0030-200

Labscope Teacher 2.0

Item Number: 410135-0030-200

Labscope Teacher 2.0 Labscope Teacher 2.0 is a licensed server SW for digital classroom management and interactive teaching and learning, it provides the following features: - Broadcast of teachers microscope view to students in real time - Chat function for text and emojis - Shared class folders for easy file sharing and storage - Students can use any iOS, Android or Windows device to participate in class - Teachers use a SW Labscope Teacher on a Windows device Note: The Labscope Teacher installation consists of two parts: the server part and the teacher client part. You can install both on the same PC/laptop or install the server part on a PC and the teacher client on a laptop. The licence must be activated viathe licence management tool on the server part of the PC/laptop. For the required PC specifications and other details, please refer to the product information or the Quick Installation Guide.

ZEN drivers

Item has been added to the configuration

ZEN Software Driver Linkam

Recover

Item no.: 410136-0044-350

ZEN Software Driver Linkam

Item Number: 410136-0044-350

ZEN Software Driver Linkam Module to control Linkam Single-Element Heating/Freezing Stages and Vacuum option - Setup of temperature curves with individually defined temperature ramps - Acquisition of time series or temperature series - 5-point temperature calibration - Automatic logging and graphic representation of temperature- and vacuum data - Simultaneous presentation of temperature curve and temperature/time series - T95/T96-LinkPad and PE95/PE96-LinkPad controller supported

ZEN core base software

Item has been added to the configuration

ZEN analyzer 3.9 Floating License

Recover

Item no.: 410135-2035-390

ZEN analyzer 3.9 Floating License

Item Number: 410135-2035-390

ZEN analyzer 3.9 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.8 Floating License

Recover

Item no.: 410135-2035-380

ZEN analyzer 3.8 Floating License

Item Number: 410135-2035-380

ZEN analyzer 3.8 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.10 Floating License

Recover

Item no.: 410135-2035-310

ZEN analyzer 3.10 Floating License

Item Number: 410135-2035-310

ZEN analyzer 3.10 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating system: Windows 10 (64-Bit) / Windows 11 Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.9

Recover

Item no.: 410135-0035-390

ZEN analyzer 3.9

Item Number: 410135-0035-390

ZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)amma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.8

Recover

Item no.: 410135-0035-380

ZEN analyzer 3.8

Item Number: 410135-0035-380

ZEN analyzer 3.8 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.10

Recover

Item no.: 410135-0035-310

ZEN analyzer 3.10

Item Number: 410135-0035-310

ZEN analyzer 3.10 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating systems: Windows 10 (64-Bit) / Windows 11

Item has been added to the configuration

ZEN core 3.9

Recover

Item no.: 410135-0011-390

ZEN core 3.9

Item Number: 410135-0011-390

ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN core 3.8

Recover

Item no.: 410135-0011-380

ZEN core 3.8

Item Number: 410135-0011-380

ZEN core 3.8 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Smartproof 5 and Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components. - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN core 3.10

Recover

Item no.: 410135-0011-310

ZEN core 3.10

Item Number: 410135-0011-310

ZEN core 3.10 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export Supported operating systems: Windows 10 (64-bit) / Windows 11

arivis Vision4D software for image processing

Item has been added to the configuration

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Recover

Item no.: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Item Number: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN Desk 3.8 and arivis pro TL package (D)

Recover

Item no.: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package (D)

Item Number: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package Combined package of a ZEN desk base software and a two-year temporary license of arivis pro for 3D image visualization and data analysis to help researchers getting started with their image analysis. ZEN Desk: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. This arivis pro (TL) temporary license is valid for two years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact support-zeiss@arivis.com) with regular SW updates. The arivis pro (TL) package can only be sold together with a new microscopy system. After two years this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time (contact sales-zeiss@arivis.com).

arivis Software

Item has been added to the configuration

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-310

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-310

ZEN desk 3.10 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid forBiotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Labscope - Basic Software

Item has been added to the configuration

Labscope 4.3 for Windows

Recover

Item no.: 410135-0052-430

Labscope 4.3 for Windows

Item Number: 410135-0052-430

Labscope 4.3 for Windows Labscope for Windows is a software used to control and acquire images through connected and compatible microscopes. This combined system is used for in-vitro examination of images to obtain information about physiological orpathological processes or conditions. Labscope for Windows is intended for the use of professional users, among others in the field of life science, cytology and pathology. The connected microscopes are themselves CE-IVD products. For IVD examinations, ensure that the displayed image on the monitor shows the equivalent information as visible through the eyepieces of the microscope. Labscope AI modules "AI Cell Confluency" and "AI Cell Counting" are not intended for IVD examinations and may only be usedin research. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Item has been added to the configuration

Labscope for iOS / Android (O)

Recover

Item no.: 410135-0052-100

Labscope for iOS / Android (O)

Item Number: 410135-0052-100

Labscope for iOS / Android (O) Labscope for iOS / Android is a microscope software used to control, image acquisition, image processing and image analysis. Typical application fields of the software are general tasks and applications in microscopy or image acquisition, among others for education, routine and research. The software is not intended to directly or indirectly produce medical diagnostic results. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Services (1)

Installation costs, etc.

Item has been added to the configuration

ZEN core TCA remote user-training (O)

Recover

Item no.: 000000-2468-467

ZEN core TCA remote user-training (O)

Item Number: 000000-2468-467

ZEN core TCA remote user-training (O) In this remote training supervisors and operators will get in-depth knowledge about and practice in: - ZEN Core TCA Workflow - ZEN Core TCA - multiple tile regions acquisition incl. focus correction - Particle segmentation and measurement - Size Distribution View with particle gallery and Particle Revision View - Manual Particle Height Measurement - Knowledge and Management of Standards and Acceptance criteria via the Standard Template Editor - Report template editing - Browse results: archived data, data export and Particle Inspection via archive - Introduction to TCA Online Help - Hardware maintenance and operation - ZEN Core basics Furthermore the trainer sets up basic parameters in the ZEN workflow and defines a standard template with region filter (minimum particle size), particle type, size classes, approval criteria (by number of particles or by particle size), occupancy rate and normalization factors (N,A,V) in agreement with the customer. Duration of remote-session: 8h

Packing and dust protection (1)

Dust covers

Item has been added to the configuration

Dust protection Set L

Recover

Item no.: 434304-0000-000

Dust protection Set L

Item Number: 434304-0000-000

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm

Microscope Axioscope 7 RL BF/DF LED for reflected-light bright field and dark field, with phototube